[Bug] qmk-cli cannot flash device
I cannot flash the keyboard on alpine linux. I've installed all necessary deps and copied udev rules. Then reboot to make sure udev rules bind.
~ > doas apk -i add avr-libc gcc-avr dfu-programmer gcc-arm-none-eabi avrdude dfu-util
~ < doas cp /home/tim/qmk_firmware/util/udev/50-qmk.rules /etc/udev/rules.d/
But after reseting the board I've got that loading
* The firmware size is fine - 26998/28672 (94%, 1674 bytes free)
Flashing for bootloader: caterina
Waiting for USB serial port - reset your controller now (Ctrl+C to cancel)........
Device /dev/ttyACM0 has appeared; assuming it is the controller.
Waiting for /dev/ttyACM0 to become writable...........................
which spins forever.
I'm on Alpine linux edge.