dahdi-bri_dchan.patch 5.21 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39
# Translate the D channels to a standard channel data.
# The HFC chipset provides us the D channel as data, but
# Zaptel expects it as a standard channel with 1000 samples
# per second.

--- a/include/dahdi/kernel.h
+++ b/include/dahdi/kernel.h
@@ -132,6 +132,13 @@ struct dahdi_chan {
 	int do_ppp_error;
 	struct sk_buff_head ppp_rq;
 #endif
+#ifdef CONFIG_DAHDI_BRI_DCHANS
+	int bytes2receive;
+	int maxbytes2transmit; /* size of the tx buffer in the card driver */
+	int bytes2transmit;
+	int eofrx;
+	int eoftx;
+#endif
 	spinlock_t lock;
 	char name[40];
 	/* Specified by DAHDI */
@@ -462,6 +469,9 @@ enum {
 	DAHDI_FLAGBIT_LOOPED	= 18,	/*!< Loopback the receive data from the channel to the transmit */
 	DAHDI_FLAGBIT_MTP2	= 19,	/*!< Repeats last message in buffer and also discards repeating messages sent to us */
 	DAHDI_FLAGBIT_HDLC56	= 20,	/*!< Sets the given channel (if in HDLC mode) to use 56K HDLC instead of 64K  */
+#if defined(CONFIG_DAHDI_BRI_DCHANS)
+	DAHDI_FLAGBIT_BRIDCHAN   = 21,	/*!< hardhdlc-like handling of the D channel */
+#endif
 };
 
 /* map flagbits to flag masks */
@@ -500,6 +510,7 @@ enum {
 #define DAHDI_FLAG_LOOPED	DAHDI_FLAG(LOOPED)
 #define DAHDI_FLAG_MTP2		DAHDI_FLAG(MTP2)
 #define DAHDI_FLAG_HDLC56	DAHDI_FLAG(HDLC56)
+#define DAHDI_FLAG_BRIDCHAN	DAHDI_FLAG(BRIDCHAN)
 
 struct dahdi_span {
 	spinlock_t lock;
40 41
--- a/include/dahdi/dahdi_config.h
+++ b/include/dahdi/dahdi_config.h
42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161
@@ -174,4 +174,10 @@
  */
 /* #define	OPTIMIZE_CHANMUTE */
 
+/*
+ * Uncomment the following for BRI D channels
+ *
+ */
+#define CONFIG_DAHDI_BRI_DCHANS
+
 #endif
--- a/drivers/dahdi/dahdi-base.c
+++ b/drivers/dahdi/dahdi-base.c
@@ -5907,11 +5907,40 @@ static inline void __dahdi_getbuf_chunk(
 					*(txb++) = fasthdlc_tx_run_nocheck(&ms->txhdlc);
 				}
 				bytes -= left;
+#ifdef CONFIG_DAHDI_BRI_DCHANS
+			} else if (test_bit(DAHDI_FLAGBIT_BRIDCHAN, &ms->flags)) {
+			    /*
+			     * Let's get this right, we want to transmit complete frames only.
+			     * The card driver will do the dirty HDLC work for us.
+			     * txb (transmit buffer) is supposed to be big enough to store one frame
+			     * we will make this as big as the D fifo (1KB or 2KB)
+			     */
+
+			    /* there are 'left' bytes in the user buffer left to transmit */
+			    left = ms->writen[ms->outwritebuf] - ms->writeidx[ms->outwritebuf] - 2;
+			    if (left > ms->maxbytes2transmit) {
+				memcpy(txb, buf + ms->writeidx[ms->outwritebuf], ms->maxbytes2transmit);
+				ms->writeidx[ms->outwritebuf] += ms->maxbytes2transmit;
+				txb += ms->maxbytes2transmit;
+				ms->bytes2transmit = ms->maxbytes2transmit;
+				ms->eoftx = 0;
+			    } else {
+				memcpy(txb, buf + ms->writeidx[ms->outwritebuf], left);
+				ms->writeidx[ms->outwritebuf] += left + 2;
+				txb += left + 2;
+				ms->bytes2transmit = left;
+				ms->eoftx = 1;
+			    }
+			    bytes = 0;
+#endif
 			} else {
 				memcpy(txb, buf + ms->writeidx[ms->outwritebuf], left);
 				ms->writeidx[ms->outwritebuf]+=left;
 				txb += left;
 				bytes -= left;
+#if defined(CONFIG_DAHDI_BRI_DCHANS)	
+				ms->bytes2transmit=DAHDI_CHUNKSIZE;
+#endif
 			}
 			/* Check buffer status */
 			if (ms->writeidx[ms->outwritebuf] >= ms->writen[ms->outwritebuf]) {
@@ -5968,6 +5997,17 @@ out in the later versions, and is put ba
 				/* Transmit a flag if this is an HDLC channel */
 				if (ms->flags & DAHDI_FLAG_HDLC)
 					fasthdlc_tx_frame_nocheck(&ms->txhdlc);
+#if defined(CONFIG_DAHDI_BRI_DCHANS)	
+				if (test_bit(DAHDI_FLAGBIT_BRIDCHAN, &ms->flags)) {
+			//	    if (ms->bytes2transmit > 0) {
+					// txb += 2;
+					// ms->bytes2transmit -= 2;
+					bytes=0;
+					ms->eoftx = 1;
+//					printk(KERN_CRIT "zaptel EOF(%d) bytes2transmit %d\n",ms->eoftx,ms->bytes2transmit);
+			//	    }
+				}
+#endif
 #ifdef CONFIG_DAHDI_NET
 				if (ms->flags & DAHDI_FLAG_NETDEV)
 					netif_wake_queue(ztchan_to_dev(ms));
@@ -6028,6 +6068,12 @@ out in the later versions, and is put ba
 				memset(txb, 0xFF, bytes);
 			}
 			bytes = 0;
+#if defined(CONFIG_DAHDI_BRI_DCHANS)	
+		} else if (test_bit(DAHDI_FLAGBIT_BRIDCHAN, &ms->flags)) {
+		    ms->bytes2transmit = 0;
+		    ms->eoftx = 0;
+		    bytes = 0;
+#endif
 		} else {
 			memset(txb, DAHDI_LIN2X(0, ms), bytes);	/* Lastly we use silence on telephony channels */
 			bytes = 0;
@@ -6840,6 +6886,14 @@ static inline void __putbuf_chunk(struct
 	int res;
 	int left, x;
 
+#if defined(CONFIG_DAHDI_BRI_DCHANS)	
+	if (test_bit(DAHDI_FLAGBIT_BRIDCHAN, &ms->flags)) {
+	    bytes = ms->bytes2receive;
+	    if (bytes < 1) return;
+//	    printk(KERN_CRIT "bytes2receive %d\n",ms->bytes2receive);
+	}
+#endif
+
 	while(bytes) {
 #if defined(CONFIG_DAHDI_NET)  || defined(CONFIG_DAHDI_PPP)
 		skb = NULL;
@@ -6897,6 +6951,19 @@ static inline void __putbuf_chunk(struct
 						}
 					}
 				}
+#ifdef CONFIG_DAHDI_BRI_DCHANS
+			} else if (test_bit(DAHDI_FLAGBIT_BRIDCHAN, &ms->flags)) {
+			    memcpy(buf + ms->readidx[ms->inreadbuf], rxb, left);
+			    rxb += left;
+			    ms->readidx[ms->inreadbuf] += left;
+			    bytes -= left;
+			    if (ms->eofrx == 1) {
+				eof=1;
+			    }
+//			    printk(KERN_CRIT "receiving %d bytes\n",ms->bytes2receive);
+			    ms->bytes2receive = 0;
+			    ms->eofrx = 0;
+#endif
 			} else {
 				/* Not HDLC */
 				memcpy(buf + ms->readidx[ms->inreadbuf], rxb, left);