alpine issueshttps://gitlab.alpinelinux.org/groups/alpine/-/issues2019-07-12T14:24:16Zhttps://gitlab.alpinelinux.org/alpine/aports/-/issues/238alsa-lib works bad with threaded applications2019-07-12T14:24:16ZNatanael Copaalsa-lib works bad with threaded applicationsThere are some issues with the way alsa/uclibc handles signals and
mutexes.
To reproduce: install gst-plugins-base and greate a test audio that you
redirect to alsa sink:
gst-launch audiotestsrc ! alsasink
It sounds like beep-beep...There are some issues with the way alsa/uclibc handles signals and
mutexes.
To reproduce: install gst-plugins-base and greate a test audio that you
redirect to alsa sink:
gst-launch audiotestsrc ! alsasink
It sounds like beep-beep-beep… rather than a continuos sine sound.
Workaround so far is to use OSS instead of alsa.
*(from redmine: issue id 238, created on 2010-01-06, closed on 2010-05-13)*
* Relations:
* blocks #237Alpine 2.0.0https://gitlab.alpinelinux.org/alpine/aports/-/issues/237Support for NPTL in uclibc2019-07-12T14:24:15ZNatanael CopaSupport for NPTL in uclibcWe need get NPTL working in uclibc
*(from redmine: issue id 237, created on 2010-01-06, closed on 2010-05-13)*
* Relations:
* blocks #238
* blocks #240
* blocks #239
* blocks #327We need get NPTL working in uclibc
*(from redmine: issue id 237, created on 2010-01-06, closed on 2010-05-13)*
* Relations:
* blocks #238
* blocks #240
* blocks #239
* blocks #327Alpine 2.0.0https://gitlab.alpinelinux.org/alpine/aports/-/issues/218Write a short doc on how to use/configure apk-tools2019-07-12T14:24:05ZNatanael CopaWrite a short doc on how to use/configure apk-toolsSee:
http://lists.impactlinux.com/pipermail/firmware-impactlinux.com/2009-December/000529.html
*(from redmine: issue id 218, created on 2009-12-14, closed on 2010-08-16)*See:
http://lists.impactlinux.com/pipermail/firmware-impactlinux.com/2009-December/000529.html
*(from redmine: issue id 218, created on 2009-12-14, closed on 2010-08-16)*Alpine 2.0.0Nathan AngelacosNathan Angelacoshttps://gitlab.alpinelinux.org/alpine/aports/-/issues/210package request: sshfs-fuse2019-07-12T14:23:58ZNatanael Copapackage request: sshfs-fuseFUSE client based on the SSH File Transfer Protocol.
http://fuse.sourceforge.net/sshfs.html
not sure if we should call this package sshfs or sshfs-fuse.
*(from redmine: issue id 210, created on 2009-11-24, closed on 2010-07-20)*
* C...FUSE client based on the SSH File Transfer Protocol.
http://fuse.sourceforge.net/sshfs.html
not sure if we should call this package sshfs or sshfs-fuse.
*(from redmine: issue id 210, created on 2009-11-24, closed on 2010-07-20)*
* Changesets:
* Revision 7a0b6bcc0bc61677944d7ab3f8e635347fd32353 on 2010-01-20T15:53:25Z:
```
testing/fuse: new aport
A library that makes it possible to implement a filesystem in a userspace program.
http://fuse.sourceforge.net/
Needed by sshfs (ref #210) and open-vm-tools (ref #193)
```
* Revision 36b1667c368adbc7cb916e6853fe273ac5212422 on 2010-07-16T13:34:48Z:
```
testing/sshfs: new aport
FUSE client based on the SSH File Transfer Protocol
http://fuse.sourceforge.net/sshfs.html
ref #210
```
* Revision d5d7b466437ac678d791937d8e4699bb4ff82fb8 on 2010-07-16T13:43:01Z:
```
main/sshfs: moved from testing
fixes #210
```Alpine 2.0.0Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/199apks for dovecot pgsql or mysql bindings2019-07-12T14:23:50ZNathan Angelacosapks for dovecot pgsql or mysql bindingsThe current dovecot APKBUILD does not include plugins for
mysql,postgresql or sqlite.
The postfix apkbuild includes bindings for mysql and pgsql (e.g. apk add
postfix-pgsql works)
Since they are often used together, it would be nice to...The current dovecot APKBUILD does not include plugins for
mysql,postgresql or sqlite.
The postfix apkbuild includes bindings for mysql and pgsql (e.g. apk add
postfix-pgsql works)
Since they are often used together, it would be nice to have a
corresponding dovecot-pgsql / dovecot-mysql apk
This would allow the two to share the same user and authentication
databases.
*(from redmine: issue id 199, created on 2009-11-04, closed on 2009-12-23)*
* Changesets:
* Revision 68fe16b6a2c4cc1b1ecfe7a0574a6c46eaf885d3 on 2009-11-04T09:14:51Z:
```
main/dovecot: added plugins for pgsql, mysql and sqlite
fixes #199
```Alpine 2.0.0Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/190package request: opentracker2019-07-12T14:23:44ZNatanael Copapackage request: opentrackerWould be nice with our own tracker, running on alpine.
http://erdgeist.org/arts/software/opentracker/
*(from redmine: issue id 190, created on 2009-10-22, closed on 2010-07-09)*
* Changesets:
* Revision 2da022a8f0642c8990ba999256fc...Would be nice with our own tracker, running on alpine.
http://erdgeist.org/arts/software/opentracker/
*(from redmine: issue id 190, created on 2009-10-22, closed on 2010-07-09)*
* Changesets:
* Revision 2da022a8f0642c8990ba999256fc8b9ccada29f2 on 2010-06-30T15:55:28Z:
```
main/opentracker: moved from testing
fixes #190
```Alpine 2.0.0https://gitlab.alpinelinux.org/alpine/aports/-/issues/189package request: ircservices2019-07-12T14:23:44ZNatanael Copapackage request: ircserviceshttp://www.ircservices.za.net/
*(from redmine: issue id 189, created on 2009-10-22, closed on 2010-07-09)*
* Changesets:
* Revision a4c70cb0129bc2a6b25b105fb8bfbfd5773897ae on 2010-01-25T13:18:25Z:
```
testing/ircservices: new apor...http://www.ircservices.za.net/
*(from redmine: issue id 189, created on 2009-10-22, closed on 2010-07-09)*
* Changesets:
* Revision a4c70cb0129bc2a6b25b105fb8bfbfd5773897ae on 2010-01-25T13:18:25Z:
```
testing/ircservices: new aport
Services for IRC (NickServ, ChanServ, MemoServ)
http://www.ircservices.za.net/
ref #189
```
* Revision da5c2bd399502ac39b7fdd942ca121eb73d54f71 on 2010-07-07T14:40:25Z:
```
main/ircservices: moved from testing
fixes #189
```Alpine 2.0.0https://gitlab.alpinelinux.org/alpine/aports/-/issues/185luaposix: numeric presentation of stat().mode2019-07-12T14:23:43Zaa latchmluaposix: numeric presentation of stat().modecurrently, posix.stat only provides a human-readable representation of
file mode. http://wiki.alpinelinux.org/w/index.php?title=LPOSIX\#stat
indicates a “\_mode” option for numneric mode, but this does not exist.
> a = posix.stat("/...currently, posix.stat only provides a human-readable representation of
file mode. http://wiki.alpinelinux.org/w/index.php?title=LPOSIX\#stat
indicates a “\_mode” option for numneric mode, but this does not exist.
> a = posix.stat("/etc/")
> print(a["mode"])
rwxr-xr-x
> print(a["_mode"])
nil
Although the current format of posix.stat(f, “mode”) can be used with
posix.chmod, it would improve interoperability and processing to provide
numeric mode.
*(from redmine: issue id 185, created on 2009-10-15, closed on 2010-07-07)*Alpine 2.0.0Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/96Package request: libatomic-ops-dev2019-07-12T14:23:00ZTimo TeräsPackage request: libatomic-ops-devHomepage: http://www.hpl.hp.com/research/linux/atomic\_ops/download.php4
Latest release:
http://www.hpl.hp.com/research/linux/atomic\_ops/download/libatomic\_ops-1.2.tar.gz
But we really want a more recent version with e.g. PIC fixes...Homepage: http://www.hpl.hp.com/research/linux/atomic\_ops/download.php4
Latest release:
http://www.hpl.hp.com/research/linux/atomic\_ops/download/libatomic\_ops-1.2.tar.gz
But we really want a more recent version with e.g. PIC fixes. So we
could probably take the debian version from:
http://packages.debian.org/sid/libatomic-ops-dev
http://ftp.de.debian.org/debian/pool/main/liba/libatomic-ops/libatomic-ops\_1.2+cvs20080819.orig.tar.gz
Note, we probably want this as development package only: the package is
mostly a huge bunch of header files to have inline assembler definitions
for the atomic operations. It does provide two very small static
libraries too for some larger functions. But I don’t see any point in
having two really small .so:s to create extra dependencies.
*(from redmine: issue id 96, created on 2009-07-28, closed on 2010-03-11)*
* Changesets:
* Revision 25c57eefb328d4a754ea9086dae5353f5eccd013 on 2009-09-09T12:02:35Z:
```
testing/atomic-ops: new aport
A library for atomic operations
http://www.hpl.hp.com/research/linux/atomic_ops/download.php4
We use the debian source package with cvs patch
fixes #96
```
* Revision cfb49dfb2409bb61ad97e8198e9bdd7450e462eb on 2010-07-07T14:21:03Z:
```
testing/atomic-ops: removed since its not needed anymore
ref #96
```Alpine 2.0.0https://gitlab.alpinelinux.org/alpine/aports/-/issues/95Package request: libcap-ng2019-07-12T14:23:00ZTimo TeräsPackage request: libcap-ngFrom: http://people.redhat.com/sgrubb/libcap-ng/index.html
Latest release at:
http://people.redhat.com/sgrubb/libcap-ng/libcap-ng-0.6.1.tar.gz
And a white paper at:
https://fedoraproject.org/wiki/Features/LowerProcessCapabilities
...From: http://people.redhat.com/sgrubb/libcap-ng/index.html
Latest release at:
http://people.redhat.com/sgrubb/libcap-ng/libcap-ng-0.6.1.tar.gz
And a white paper at:
https://fedoraproject.org/wiki/Features/LowerProcessCapabilities
*(from redmine: issue id 95, created on 2009-07-28, closed on 2010-07-08)*
* Changesets:
* Revision f7900a9fcc96a8cc8c3244399f46110d261a09b7 on 2010-07-07T13:27:40Z:
```
testing/libcap-ng: new aport
posix capabilities library
http://people.redhat.com/sgrubb/libcap-ng/index.html
fixes #95
```
* Revision e349765e32d91566ed042a322ff89ab4b3a3e476 on 2010-07-07T14:18:56Z:
```
main/libcap-ng: moved from testing
fixes #95
```Alpine 2.0.0https://gitlab.alpinelinux.org/alpine/aports/-/issues/422Soekris 4801, alpine 2.0.0, kernel panic2019-07-12T14:26:12ZJon ClausenSoekris 4801, alpine 2.0.0, kernel panicAs discussed on the alpine-devel list, in this thread:
http://lists.alpinelinux.org/alpine-devel/1029.html
Booting alpine 2.0.0 on the soekris4801 with the standard
(2.6.32.18-grsec) kernel leads to kernel panic.
Other kernels were t...As discussed on the alpine-devel list, in this thread:
http://lists.alpinelinux.org/alpine-devel/1029.html
Booting alpine 2.0.0 on the soekris4801 with the standard
(2.6.32.18-grsec) kernel leads to kernel panic.
Other kernels were tested with the following results:
“standard kernels”;
2.6.32.15-grsec (beta2): boots ok
2.6.32.16-grsec (beta3->rc3): panic
“vserver kernels”;
2.6.32.15 (beta2): boots ok
2.6.32.16 (rc3): boots ok
2.6.32.16 (final): boots ok
While researching the issue I stumbled upon a hint (sorry, I don’t have
the link) that the kernel parameter “noreplace-paravirt” might help. So
I tried that, and it did in fact allow the kernel to boot without the
panic.
A short while later Natanael Copa had been in contact with pipacs on
\#grsecurity, who supplied a patch to fix the issue. I don’t know what’s
in the patch, but it did work:
Natanael built an “edge” iso with the patched kernel (
http://dev.alpinelinux.org/~ncopa/alpine/alpine-edge-100827-x86.iso )
which I tested, and which boots successfully.
Thus the issue is (probably) already resolved/resolvable. This bug
report is just to have the issue tracked correctly, so the patch can be
included with alpine 2.0.1
The Soekris boxes are used with a serial console, so I was able to
‘grab’ the output of the boot process and save it. Attached are some of
these ‘boot logs’.
A word about the environment:
Because I was testing a “large-ish” number of different kernels, I ended
up using pxe/tftp to deliver the kernel/initrd to the soekris. On the
CF-card, however, alpine 2.0.0 was installed. This leads to errors,
because /dev/sda1 **is** present and does get mounted, but anything
kernel-<version> specific is “not found”. These errors are not relevant,
and should be ignored.
Naming of the attached logs (not entirely consistent):
<kernel-version>-<alpine-release>{.<kernel-parameter(s)>}.boot
regards,
Jon Clausen
*(from redmine: issue id 422, created on 2010-09-02, closed on 2010-09-03)*Alpine 2.0.1Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/420main/iptables: /etc/init.d/ip6tables unable to save rules2019-07-12T14:26:11ZMatt Smithmain/iptables: /etc/init.d/ip6tables unable to save rulesThe cause of this issue is the lack of an IP6TABLES\_SAVE variable in a
currently non-existent /etc/conf.d/ip6tables service configuration file.
I’m working on a patch that should be ready pretty soon.
*(from redmine: issue id 420, cr...The cause of this issue is the lack of an IP6TABLES\_SAVE variable in a
currently non-existent /etc/conf.d/ip6tables service configuration file.
I’m working on a patch that should be ready pretty soon.
*(from redmine: issue id 420, created on 2010-09-02, closed on 2010-09-03)*
* Changesets:
* Revision 0c9384fd13087147e6055d9d9d90796805645343 by Matt Smith on 2010-09-02T12:32:29Z:
```
main/iptables: /etc/init.d/ip6tables unable to save rules
This fixes #420:
http://redmine.alpinelinux.org/issues/420
```
* Revision 05f07f56de1b5ac1b94bd93946912ba33c30c332 by Matt Smith on 2010-09-02T13:34:52Z:
```
main/iptables: /etc/init.d/ip6tables unable to save rules
This fixes #420:
http://redmine.alpinelinux.org/issues/420
(cherry picked from commit 0c9384fd13087147e6055d9d9d90796805645343)
```Alpine 2.0.1Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/419alpine-conf: setup-disk still does not add swap to fstab2019-07-12T14:26:10ZMatt Smithalpine-conf: setup-disk still does not add swap to fstabI’ve got a patch that will fix it.
*(from redmine: issue id 419, created on 2010-09-01, closed on 2010-09-03)*
* Changesets:
* Revision 595935f999281e7de19fe7b1135adf0f2cdd290e on 2010-09-02T13:20:46Z:
```
main/alpine-conf: upgrade...I’ve got a patch that will fix it.
*(from redmine: issue id 419, created on 2010-09-01, closed on 2010-09-03)*
* Changesets:
* Revision 595935f999281e7de19fe7b1135adf0f2cdd290e on 2010-09-02T13:20:46Z:
```
main/alpine-conf: upgrade to 2.5.1
fixes #419
```
* Revision 20060f3d6b2dce616a91fb6b91f8995f9cd83512 on 2010-09-02T13:33:34Z:
```
main/alpine-conf: upgrade to 2.5.1
fixes #419
(cherry picked from commit 595935f999281e7de19fe7b1135adf0f2cdd290e)
```Alpine 2.0.1https://gitlab.alpinelinux.org/alpine/aports/-/issues/416setup-disk deletes existing /etc/fstab entries2022-07-25T21:32:27ZTed Trasksetup-disk deletes existing /etc/fstab entriesAfter running setup-disk and booting from harddisk, /etc/fstab only
contains the two lines created by setup-disk. So, the entries for
mounting CD ROM and USB disk are missing. Tested with 2.0 iso.
*(from redmine: issue id 416, created ...After running setup-disk and booting from harddisk, /etc/fstab only
contains the two lines created by setup-disk. So, the entries for
mounting CD ROM and USB disk are missing. Tested with 2.0 iso.
*(from redmine: issue id 416, created on 2010-08-20, closed on 2010-08-31)*
* Changesets:
* Revision ba5e38b280bdaf19211da9e2d6e0b2c76d06ab14 on 2010-08-24T15:12:39Z:
```
main/alpine-conf: setup-disk fstab fix
ref #416
```
* Revision 0daf25dda4c807babb77838124858ecd19dc389c on 2010-08-24T15:13:49Z:
```
main/alpine-conf: setup-disk fstab fix
fixes #416
(cherry picked from commit a0ca5896739867741f0c9637b5d8376d33cbddf3)
```Alpine 2.0.1https://gitlab.alpinelinux.org/alpine/aports/-/issues/413Alpine-vserver-2.0.0-x86.iso won't boot2019-07-12T14:26:07ZNathan AngelacosAlpine-vserver-2.0.0-x86.iso won't bootThe syslinux.cfg file on the vserver iso file lists:
default grsec
label vserver
kernel /boot/vserver
but since there is no “grsec” label, the boot process can’t find a
kernel to boot. (Yes, you can type in the label by hand, but t...The syslinux.cfg file on the vserver iso file lists:
default grsec
label vserver
kernel /boot/vserver
but since there is no “grsec” label, the boot process can’t find a
kernel to boot. (Yes, you can type in the label by hand, but that’s not
very user friendly)
Suggest changing “default grsec” to “default vserver”
*(from redmine: issue id 413, created on 2010-08-19, closed on 2010-09-03)*Alpine 2.0.1Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/412uclibc's getprotobyname() is broken2019-07-12T14:26:06ZNatanael Copauclibc's getprotobyname() is brokenWhen there are any line longer than 80 bytes in /etc/protocols the
getprotobyname will return error. This affects iptables and racoon.
There are 2 different workarounds for this:
- remove lines with comments longer than 80 chars in /...When there are any line longer than 80 bytes in /etc/protocols the
getprotobyname will return error. This affects iptables and racoon.
There are 2 different workarounds for this:
- remove lines with comments longer than 80 chars in /etc/protocols
- use the numeric value for the protocol
*(from redmine: issue id 412, created on 2010-08-19, closed on 2010-09-03)*
* Changesets:
* Revision bf64cf5bfea50f6623fa653b4e8434047f186ee7 on 2010-08-31T07:35:41Z:
```
main/libc0.9.32: workaround for broken getprotobyname()
ref #412
```
* Revision 84f0235dc8430751d2b6ed3bc699180238f6718c on 2010-08-31T07:40:49Z:
```
main/libc0.9.32: workaround for broken getprotobyname()
ref #412
(cherry picked from commit bf64cf5bfea50f6623fa653b4e8434047f186ee7)
```Alpine 2.0.1Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/411upgrade to 2.6.32.20 kernels2019-07-12T14:26:05ZNatanael Copaupgrade to 2.6.32.20 kernelsthe 2.6.32.18 and .19 have issues
*(from redmine: issue id 411, created on 2010-08-19, closed on 2010-09-03)*
* Changesets:
* Revision f43e2508de8bbc10f262a05817b1143072ed64f0 on 2010-08-31T14:00:53Z:
```
main/linux-grsec: upgrade ...the 2.6.32.18 and .19 have issues
*(from redmine: issue id 411, created on 2010-08-19, closed on 2010-09-03)*
* Changesets:
* Revision f43e2508de8bbc10f262a05817b1143072ed64f0 on 2010-08-31T14:00:53Z:
```
main/linux-grsec: upgrade to grsecurity-2.2.0-2.6.32.19-201008131840
ref #411
we also need a patch for building with make-3.82
(cherry picked from commit 84f45ab7fec0f7e9651e9271d098cb6aaf6da524)
```Alpine 2.0.1Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/410warning from zaphfc kernel driver2022-07-25T21:32:27ZNatanael Copawarning from zaphfc kernel driverSeems to only affect alpine-2.0.0
zaphfc: Card 0 configured for TE mode
zaphfc: Card 0 configured for master mode
------------[ cut here ]------------
WARNING: at /home/buildozer/aports/main/dahdi-linux-grsec/src/dahdi-l...Seems to only affect alpine-2.0.0
zaphfc: Card 0 configured for TE mode
zaphfc: Card 0 configured for master mode
------------[ cut here ]------------
WARNING: at /home/buildozer/aports/main/dahdi-linux-grsec/src/dahdi-linux-2.3.0.1/drivers/dahdi/dahdi-base.c:5866 0x37d990()
Hardware name: VIA694X/686A
Modules linked in: zaphfc(+) dahdi crc_ccitt af_packet deadline_iosched psmouse serio_raw snd_pcm snd_page_alloc snd_timer snd soundcore pcspkr shpchp pci_hotplug i2c_viapro i2c_core via686a hwmon via_agp agpgart 3c59x mii evdev rtc_cmos rtc_core rtc_lib parport_pc parport thermal button processor nls_cp437 vfat fat nls_iso8859_1 isofs uhci_hcd ata_generic pata_via pata_acpi libata sr_mod cdrom floppy usb_storage usb_libusual usbcore nls_base sd_mod scsi_mod cramfs loop
Pid: 988, comm: modprobe Not tainted 2.6.32.18-grsec #1-Alpine
Call Trace:
[<0002958c>] 0x02958c
[<0037d990>] ? 0x37d990
[<000295b0>] 0x0295b0
[<0037d990>] 0x37d990
[<000f1f01>] ? 0x0f1f01
[<003892ed>] ? 0x3892ed
[<0038932a>] 0x38932a
[<00002bd0>] ? 0x002bd0
[<003893f5>] ? 0x3893f5
[<0038946b>] 0x38946b
[<00002141>] 0x002141
[<0004d167>] 0x04d167
[<00004656>] 0x004656
[<00004338>] ? 0x004338
[<00004338>] ? 0x004338
[<00009aba>] ? 0x009aba
---[ end trace 4d8beee8dc7ecc48 ]---
*(from redmine: issue id 410, created on 2010-08-19, closed on 2010-09-03)*
* Changesets:
* Revision eafaf07e8659fad3be7d2d274ce56de338d23e9a on 2010-08-19T12:25:16Z:
```
main/linux-dahdi-linux-{grsec,vserver}: fix warning from zaphfc driver
Patch from tteras.
ref #410
```
* Revision db594013b07071744fec8c436237140c59e13c51 on 2010-08-31T14:07:36Z:
```
main/linux-dahdi-linux-{grsec,vserver}: fix warning from zaphfc driver
Patch from tteras.
fixes #410
(cherry picked from commit eafaf07e8659fad3be7d2d274ce56de338d23e9a)
```Alpine 2.0.1https://gitlab.alpinelinux.org/alpine/aports/-/issues/432libetpan missing gnutls (STARTTLS support missing)2019-07-12T14:26:19ZNathan Angelacoslibetpan missing gnutls (STARTTLS support missing)claws-mail -V lists that it is compiled with gnutls; and so all of the
TLS/SSL options in claws-mail appear to work.
However, it appears the underlying libexpat library was compiled without
gnutls enabled; so claws-mail fails in the TLS...claws-mail -V lists that it is compiled with gnutls; and so all of the
TLS/SSL options in claws-mail appear to work.
However, it appears the underlying libexpat library was compiled without
gnutls enabled; so claws-mail fails in the TLS negotiation.
*(from redmine: issue id 432, created on 2010-09-14, closed on 2010-09-23)*
* Changesets:
* Revision d18ae49603c8dbe6c4390a9723731b812264d077 on 2010-09-15T06:37:32Z:
```
main/libetpan: enable ssl support
ref #432
```
* Revision 7798e6a8f7d02dfe65eb9c2ddbac120a84eb74d6 on 2010-09-23T09:10:17Z:
```
main/libetpan: enable ssl support
fixes #432
(cherry picked from commit d18ae49603c8dbe6c4390a9723731b812264d077)
```Alpine 2.0.2Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/428apk add --root fails2019-07-12T14:26:16ZNathan Angelacosapk add --root failshttp://www.alpinelinux.org/wiki/Setting\_up\_a\_basic\_vserver\#Setting\_up\_the\_guest
mentions
apk add --initdb --root /tmp/tmpdir alpine-base
however that returns
ERROR: Missing packages:
alpine-base
turns out that ...http://www.alpinelinux.org/wiki/Setting\_up\_a\_basic\_vserver\#Setting\_up\_the\_guest
mentions
apk add --initdb --root /tmp/tmpdir alpine-base
however that returns
ERROR: Missing packages:
alpine-base
turns out that apk tools from at least 1.10.1 onward need to have the
keys and repository information in the root:
mkidr -p /tmp/tmpdir/etc
cp -a /etc/apk /tmp/tmpdir/etc
apk add --initdb --root /tmp/tmpdir alpine-base
I would have assumed the initdb would have copied the repository
information to the tmp root, or something.
*(from redmine: issue id 428, created on 2010-09-09, closed on 2010-09-13)*Alpine 2.0.2Timo TeräsTimo Teräs