alpine issueshttps://gitlab.alpinelinux.org/groups/alpine/-/issues2019-07-23T14:10:04Zhttps://gitlab.alpinelinux.org/alpine/aports/-/issues/2848upgrade to qt 5.2 or 5.32019-07-23T14:10:04ZTimo Teräsupgrade to qt 5.2 or 5.3Import qt 5.2 (or upgrade to qt 5.3 beta/rc), and rebuild everything
against that in edge.
Qt 5.3 beta is out, RC is due out April 24, and first release on May 7.
I think it would make sense to jump into Qt 5.3 for Alpine 3.0.
*(from...Import qt 5.2 (or upgrade to qt 5.3 beta/rc), and rebuild everything
against that in edge.
Qt 5.3 beta is out, RC is due out April 24, and first release on May 7.
I think it would make sense to jump into Qt 5.3 for Alpine 3.0.
*(from redmine: issue id 2848, created on 2014-04-18, closed on 2014-12-09)*3.1.0Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/2847'lbu diff' does not handle symlinks right2019-07-15T14:13:19ZTimo Teräs'lbu diff' does not handle symlinks rightIt should not derefence the symlinks. Would be preferable to say
“symlink has changed from A to B” or similar, instead of diffing the
dereferenced contents.
This should also fix the errors that come if symlink points to
non-existing fil...It should not derefence the symlinks. Would be preferable to say
“symlink has changed from A to B” or similar, instead of diffing the
dereferenced contents.
This should also fix the errors that come if symlink points to
non-existing file.
*(from redmine: issue id 2847, created on 2014-04-18)*
* Changesets:
* Revision 9cfd35abf9b00914739d3f84255cb440fa683bce by Natanael Copa on 2014-07-28T14:48:17Z:
```
main/busybox: add support for --no-dereference in 'diff'
ref #2847
```
* Revision 5e0bfe298c4ff28f1babb78659d125fd1fff8149 by Natanael Copa on 2014-08-26T12:00:44Z:
```
main/alpine-conf: fix symlink handling with lbu diff
ref #2847
```3.11.0Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/2846exclude ca-certificate symlinks from overlay2019-07-23T14:10:06ZTimo Teräsexclude ca-certificate symlinks from overlayetc/ssl/certs is populated with symlinks for the system wide
ca-certificates in /usr/share/ca-certificates. As these are maintained
by the trigger, they should not go to overlay - they get rewritten
anyway and just take up extra space an...etc/ssl/certs is populated with symlinks for the system wide
ca-certificates in /usr/share/ca-certificates. As these are maintained
by the trigger, they should not go to overlay - they get rewritten
anyway and just take up extra space and clutter lbu diff.
Two solution options:
1. rename these symlinks to be ca-cert-\*.pem and update the
protected\_path mask to exclude these
2. new apk-tools feature to exclude symlinks (that point outside) in
certain path
\#2 seems very tricky to get right. So I’d prefer solution \#1.
*(from redmine: issue id 2846, created on 2014-04-17, closed on 2014-05-06)*
* Relations:
* relates #2715
* Changesets:
* Revision af18a975d8494f923d0ff3754dd250ffc641b6ef by Timo Teräs on 2014-04-21T16:11:43Z:
```
main/ca-certificates: rewrite update-ca-certificates in lua
fix also overlay protected paths to exclude generated links.
ref #2846
```
* Revision 5f8b675b20728b5589dcd6216e0f154065aec7b8 by Timo Teräs on 2014-04-21T18:12:08Z:
```
main/update-ca-certificates: fix few minor issues in lua version
also optimize and cleanup the lua code a bit too. ref #2846
```
* Revision 3ec4346975559e89bc8f0433dc85d7689dc6fc47 by Timo Teräs on 2014-05-06T13:26:48Z:
```
main/ca-certificates: rewrite update-ca-certificates in lua
fix also overlay protected paths to exclude generated links.
ref #2846
(cherry picked from commit af18a975d8494f923d0ff3754dd250ffc641b6ef)
```
* Revision 6590afe4a24933efe65a267d65c59057438fe570 by Timo Teräs on 2014-05-06T13:27:22Z:
```
main/ca-certificates: fix few minor issues in lua version
also optimize and cleanup the lua code a bit too. fixes #2846
(cherry picked from commit 5f8b675b20728b5589dcd6216e0f154065aec7b8)
```Alpine 2.7.7Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/2845awall backport from edge2019-07-23T14:10:07ZTimo Teräsawall backport from edgeBackport awall 1.2.0 + cherry-pick fixes from git; or if awall 1.2.1 is
out then that. Expecting also dnat related bug fix in few days time that
would be especially important to have in.
*(from redmine: issue id 2845, created on 2014-0...Backport awall 1.2.0 + cherry-pick fixes from git; or if awall 1.2.1 is
out then that. Expecting also dnat related bug fix in few days time that
would be especially important to have in.
*(from redmine: issue id 2845, created on 2014-04-16, closed on 2014-04-21)*
* Changesets:
* Revision b1f23d40f579c9ab34cd4bce417091e8ed064849 by Natanael Copa on 2014-04-21T15:35:58Z:
```
main/awall: upgrade to 1.2.1
fixes #2845
```Alpine 2.7.6Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/2844libatomic s/be made a sub package of GCC2019-07-23T14:10:08ZStuart Cardalllibatomic s/be made a sub package of GCClibatomic.so.1 (currently part of GCC) is a dependency in openvswitch
for 32 bit Alpine musl & uclibc.
Making libatomic a sub-package of GCC will stop openvswitch installing
gcc / build-base etc…
Rpm based distros have a separate libat...libatomic.so.1 (currently part of GCC) is a dependency in openvswitch
for 32 bit Alpine musl & uclibc.
Making libatomic a sub-package of GCC will stop openvswitch installing
gcc / build-base etc…
Rpm based distros have a separate libatomic for both 32 & 64 bit:
http://rpm.pbone.net/index.php3?stat=3&limit=1&srodzaj=1&dl=40&search=libatomic.so.1&field%5B%5D=1&field%5B%5D=2
Have successfully built a libatomic sub-package & will submit a patch
*(from redmine: issue id 2844, created on 2014-04-16, closed on 2014-04-18)*
* Changesets:
* Revision 7b1de2968f11be226b8d34f458011bdadb3a6967 by Stuart Cardall on 2014-04-16T10:00:41Z:
```
main/gcc: - make libatomic a subpackage
This patch makes libatomic a subpackage of gcc which stops openvswitch
installing gcc & all of it's dependencies.
fixes #2844
```3.0.0https://gitlab.alpinelinux.org/alpine/aports/-/issues/2843LXC does not support i486 containers2019-07-12T14:45:51ZCarlo LandmeterLXC does not support i486 containersWhen creating a container on i486 hardware (ie ALIX hardware) the config
will be set to lxc.arch = i586 make it not able to boot.
*(from redmine: issue id 2843, created on 2014-04-15, closed on 2014-05-21)*
* Changesets:
* Revision ...When creating a container on i486 hardware (ie ALIX hardware) the config
will be set to lxc.arch = i586 make it not able to boot.
*(from redmine: issue id 2843, created on 2014-04-15, closed on 2014-05-21)*
* Changesets:
* Revision 450ffea21f019cfa559c6ee22a2315dc8c3bc8ac by Carlo Landmeter on 2014-04-15T11:58:14Z:
```
main/lxc: set correct lxc_arch for x86
reported https://github.com/lxc/lxc/pull/201
refs #2843
```
* Revision 401042d6aecd267fc73b9dcf3f7f3d924ac71558 by Natanael Copa on 2014-05-22T13:15:34Z:
```
main/lxc: backport support for all iX86 strings for lxc.arch
ref #2843
```Alpine 2.7.10Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/2842nfs-utils segfaults on musl2019-07-23T14:10:09ZYves Schumannnfs-utils segfaults on muslAfter upgrading some edge boxes to musl, nfs is not working:
ERROR: rpc.statd failed to start
ERROR: cannot start nfsmount as rpc.statd would not start
dmesg output can be found on http://sprunge.us/baIM
*(from redmine: issue id 28...After upgrading some edge boxes to musl, nfs is not working:
ERROR: rpc.statd failed to start
ERROR: cannot start nfsmount as rpc.statd would not start
dmesg output can be found on http://sprunge.us/baIM
*(from redmine: issue id 2842, created on 2014-04-14, closed on 2014-05-30)*3.0.0https://gitlab.alpinelinux.org/alpine/aports/-/issues/2841Freeswitch-1.4.0r2 example configs and sounds fail to work due to missing paths.2019-07-23T14:10:10ZTobie BoothFreeswitch-1.4.0r2 example configs and sounds fail to work due to missing paths.The current Freeswitch package doesn’t set all file paths at build time
or in the init scripts. Without these set they fall back to /usr as a
prefix making the freeswitch-sample-config and freeswitch-sounds\*
packages useless out of the ...The current Freeswitch package doesn’t set all file paths at build time
or in the init scripts. Without these set they fall back to /usr as a
prefix making the freeswitch-sample-config and freeswitch-sounds\*
packages useless out of the box.
The currently missing paths are:
-grammar /var/lib/freeswitch/grammar
-sounds /usr/share/freeswitch/sounds
-recordings /var/lib/freeswitch/recordings
-storage /var/lib/freeswitch
Either it needs to be checked if these can be added to the build time
configs or added as default options in the init overridable via the
confd.
Linking mail archive for reference:
http://lists.alpinelinux.org/alpine-devel/3645.html
*(from redmine: issue id 2841, created on 2014-04-14, closed on 2014-04-21)*
* Changesets:
* Revision 0384c673ba66290466b5c4639c5d00d41c5470f2 by Natanael Copa on 2014-04-21T15:17:57Z:
```
main/freeswitch: add configurable grammar, recordings and storage paths
fixes #2841
```Alpine 2.7.6Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/2840gross: init.d script needs to set owner and permissions for pid file dir2019-07-23T14:10:11ZNatanael Copagross: init.d script needs to set owner and permissions for pid file dirGross does not create /var/run/gross for pid file on startup.
*(from redmine: issue id 2840, created on 2014-04-13, closed on 2014-04-17)*
* Changesets:
* Revision 16198c30f7c35c14f19c357886d10d1cc088a352 by Natanael Copa on 2014-04...Gross does not create /var/run/gross for pid file on startup.
*(from redmine: issue id 2840, created on 2014-04-13, closed on 2014-04-17)*
* Changesets:
* Revision 16198c30f7c35c14f19c357886d10d1cc088a352 by Natanael Copa on 2014-04-17T08:18:07Z:
```
main/gross: create directory for pidfile in init.d script
ref #2840
```
* Revision 91ccb873fab557d915abf5ba1146d6e688d58428 by Natanael Copa on 2014-04-17T08:19:24Z:
```
main/gross: create directory for pidfile in init.d script
fixes #2840
```Alpine 2.7.6Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/2839nsd: pre-upgrade does not create the nsd:nsd user/group2019-07-23T14:10:11ZNatanael Copansd: pre-upgrade does not create the nsd:nsd user/groupWhen upgrading from v2.6 to v2.7 the nsd service stop working:
# /etc/init.d/nsd start
* checkpath: owner `nsd:nsd' not found
* ERROR: nsd failed to start
It works again after apk del nsd && apk add nsd
*(from redmine: ...When upgrading from v2.6 to v2.7 the nsd service stop working:
# /etc/init.d/nsd start
* checkpath: owner `nsd:nsd' not found
* ERROR: nsd failed to start
It works again after apk del nsd && apk add nsd
*(from redmine: issue id 2839, created on 2014-04-13, closed on 2014-04-17)*
* Changesets:
* Revision 1f7cb8f7085ab7cc37a08b37dc402667ba8c6a3f by Natanael Copa on 2014-04-16T15:56:07Z:
```
main/nsd: create nsd user on upgrade
ref #2839
```
* Revision 6ee588ad9eb04ab66695b497d4e1f283246928db by Natanael Copa on 2014-04-17T08:32:13Z:
```
main/nsd: create nsd user on upgrade
fixes #2839
(cherry picked from commit 1f7cb8f7085ab7cc37a08b37dc402667ba8c6a3f)
Conflicts:
main/nsd/APKBUILD
```Alpine 2.7.6Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/2838root password suddenly stop working and can't be changed2019-07-23T14:10:12ZAlvaro Ariasroot password suddenly stop working and can't be changedSuddenly, root’s password stopped working from console. It is unable to
login from console. However, it works from ssh connections (with an
authorized key).
Since the issue arose unexpectedly, I do not have exact steps to
reproduce it.
...Suddenly, root’s password stopped working from console. It is unable to
login from console. However, it works from ssh connections (with an
authorized key).
Since the issue arose unexpectedly, I do not have exact steps to
reproduce it.
Trying to change the password for root from a ssh session the following
error appears:
passwd: no record of root in /etc/shadow, using /etc/passwd: Numerical
result out of range
This is the line in /etc/passwd for root
root:x:0:0:root:/root:/bin/ash
This is the line in /etc/shadow for root (without the hash)
root::16171:0:::::
Alpine version is 2.6.4, 32 bits, booting from USB stick.
Thank you!
*(from redmine: issue id 2838, created on 2014-04-11, closed on 2014-05-29)*
* Changesets:
* Revision 623c0906aa469523f04146e10b8ad7ab8cdc35f2 by Natanael Copa on 2014-04-11T20:50:11Z:
```
main/busybox: fix login/su/passwd
fixes #2838
```Alpine 2.6.7Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/2837[3.x.x] Minor bugs in package xendomains2019-07-23T14:10:14ZPanthera Tigris[3.x.x] Minor bugs in package xendomainsOn systems with a temp drive mounted to /var, the pygrub script will
crash due to the missing sub-folders straight after booting, issuing the
error message:
libxl: error: libxl\_bootloader.c:364:libxl\_\_bootloader\_run: failed
to creat...On systems with a temp drive mounted to /var, the pygrub script will
crash due to the missing sub-folders straight after booting, issuing the
error message:
libxl: error: libxl\_bootloader.c:364:libxl\_\_bootloader\_run: failed
to create bootloader dir /var/run/xen/bootloader.5.d: No such file or
directory
I recommend the following solution:
—- /etc/init.d/xendomains
<span class="underline"></span>+ /etc/init.d/xendomains
@@ –72,0 +73 @@
+ checkpath -d -m 755 /var/run/xen
Furthermore, xendomains requires Perl for script execution, which is not
stated as requirement in the corresponding APKBUILD of xendomain and
should therefore be added. It took me quite a while to figure out why
the domains wouldn’t start only to realize that Perl was not installed
on my test system. Adding Perl as requirement for xendomains will
prevent other users from making the same mistake.
*(from redmine: issue id 2837, created on 2014-04-11, closed on 2014-06-26)*
* Changesets:
* Revision 382912ec55c9dcf411764579a173eb0ece6d4445 by Natanael Copa on 2014-06-11T13:18:03Z:
```
main/xen: make sure /var/run/xen exists
- start xendomains after localmount so localmount does not mount over
our /var
- add checkpath to xendomains, just in case
ref #2837
```
* Revision f209a1ace87b04c5ecfb9b2c3ecc856b716ce83f by Natanael Copa on 2014-06-26T10:27:41Z:
```
main/xen: make sure /var/run/xen exists
- start xendomains after localmount so localmount does not mount over
our /var
- add checkpath to xendomains, just in case
fixes #2837
```3.0.1Ariadne Conillariadne@ariadne.spaceAriadne Conillariadne@ariadne.spacehttps://gitlab.alpinelinux.org/alpine/aports/-/issues/2836[3.x.x] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hc...2019-07-23T14:08:18ZPanthera Tigris[3.x.x] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not afterIt seems, during boot the UHCI driver is being loaded before the EHCI
driver, which generates a warning in dmsg (see below @ 5.140022). This
is related to
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=9beeee65...It seems, during boot the UHCI driver is being loaded before the EHCI
driver, which generates a warning in dmsg (see below @ 5.140022). This
is related to
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=9beeee6584b9aa4f9192055512411484a2a624df&id2=2b70f07343389cb474235def00b021a645ede916
Please, ignore the device descriptor errors shown in the log @ 6.500953
and later, that are caused by a wacky USB device and have nothing to do
with the issue reported.
\[ 5.102694\] uhci\_hcd: USB Universal Host Controller Interface
driver
\[ 5.102868\] xen: registering gsi 23 triggering 0 polarity 1
\[ 5.102880\] Already setup the GSI :23
\[ 5.102920\] uhci\_hcd 0000:00:1d.0: setting latency timer to 64
\[ 5.102931\] uhci\_hcd 0000:00:1d.0: UHCI Host Controller
\[ 5.102946\] uhci\_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 1
\[ 5.103066\] uhci\_hcd 0000:00:1d.0: irq 23, io base 0x000040a0
\[ 5.103245\] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0001
\[ 5.103252\] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
\[ 5.103258\] usb usb1: Product: UHCI Host Controller
\[ 5.103263\] usb usb1: Manufacturer: Linux 3.10.36-0-grsec uhci\_hcd
\[ 5.103268\] usb usb1: SerialNumber: 0000:00:1d.0
\[ 5.104624\] hub 1-0:1.0: USB hub found
\[ 5.104651\] hub 1-0:1.0: 2 ports detected
\[ 5.105167\] xen: registering gsi 19 triggering 0 polarity 1
\[ 5.105180\] Already setup the GSI :19
\[ 5.105230\] uhci\_hcd 0000:00:1d.1: setting latency timer to 64
\[ 5.105246\] uhci\_hcd 0000:00:1d.1: UHCI Host Controller
\[ 5.105268\] uhci\_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 2
\[ 5.105431\] uhci\_hcd 0000:00:1d.1: irq 19, io base 0x00004080
\[ 5.105672\] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0001
\[ 5.105682\] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
\[ 5.105691\] usb usb2: Product: UHCI Host Controller
\[ 5.105699\] usb usb2: Manufacturer: Linux 3.10.36-0-grsec uhci\_hcd
\[ 5.105707\] usb usb2: SerialNumber: 0000:00:1d.1
\[ 5.114001\] hub 2-0:1.0: USB hub found
\[ 5.114026\] hub 2-0:1.0: 2 ports detected
\[ 5.114619\] xen: registering gsi 18 triggering 0 polarity 1
\[ 5.114634\] Already setup the GSI :18
\[ 5.114688\] uhci\_hcd 0000:00:1d.2: setting latency timer to 64
\[ 5.114707\] uhci\_hcd 0000:00:1d.2: UHCI Host Controller
\[ 5.114727\] uhci\_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 3
\[ 5.114891\] uhci\_hcd 0000:00:1d.2: irq 18, io base 0x00004060
\[ 5.115150\] usb usb3: New USB device found, idVendor=1d6b,
idProduct=0001
\[ 5.115161\] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
\[ 5.115169\] usb usb3: Product: UHCI Host Controller
\[ 5.115176\] usb usb3: Manufacturer: Linux 3.10.36-0-grsec uhci\_hcd
\[ 5.115184\] usb usb3: SerialNumber: 0000:00:1d.2
\[ 5.119577\] hub 3-0:1.0: USB hub found
\[ 5.119610\] hub 3-0:1.0: 2 ports detected
\[ 5.120175\] xen: registering gsi 16 triggering 0 polarity 1
\[ 5.120188\] Already setup the GSI :16
\[ 5.120240\] uhci\_hcd 0000:00:1d.3: setting latency timer to 64
\[ 5.120257\] uhci\_hcd 0000:00:1d.3: UHCI Host Controller
\[ 5.120280\] uhci\_hcd 0000:00:1d.3: new USB bus registered, assigned
bus number 4
\[ 5.120444\] uhci\_hcd 0000:00:1d.3: irq 16, io base 0x00004040
\[ 5.120702\] usb usb4: New USB device found, idVendor=1d6b,
idProduct=0001
\[ 5.120713\] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
\[ 5.120721\] usb usb4: Product: UHCI Host Controller
\[ 5.120730\] usb usb4: Manufacturer: Linux 3.10.36-0-grsec uhci\_hcd
\[ 5.120738\] usb usb4: SerialNumber: 0000:00:1d.3
\[ 5.134539\] hub 4-0:1.0: USB hub found
\[ 5.134567\] hub 4-0:1.0: 2 ports detected
\[ 5.140013\] ehci\_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI)
Driver
\[ 5.140022\] Warning! ehci\_hcd should always be loaded before
uhci\_hcd and ohci\_hcd, not after
\[ 5.143366\] ehci-pci: EHCI PCI platform driver
\[ 5.143592\] xen: registering gsi 23 triggering 0 polarity 1
\[ 5.143606\] Already setup the GSI :23
\[ 5.143694\] ehci-pci 0000:00:1d.7: setting latency timer to 64
\[ 5.163483\] ehci-pci 0000:00:1d.7: EHCI Host Controller
\[ 5.163514\] ehci-pci 0000:00:1d.7: new USB bus registered, assigned
bus number 5
\[ 5.163571\] ehci-pci 0000:00:1d.7: debug port 1
\[ 5.167664\] ehci-pci 0000:00:1d.7: cache line size of 64 is not
supported
\[ 5.167697\] ehci-pci 0000:00:1d.7: irq 23, io mem 0xd0804400
\[ 5.177695\] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
\[ 5.177745\] usb usb5: New USB device found, idVendor=1d6b,
idProduct=0002
\[ 5.177752\] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
\[ 5.177757\] usb usb5: Product: EHCI Host Controller
\[ 5.177763\] usb usb5: Manufacturer: Linux 3.10.36-0-grsec ehci\_hcd
\[ 5.177768\] usb usb5: SerialNumber: 0000:00:1d.7
\[ 5.178899\] hub 5-0:1.0: USB hub found
\[ 5.178916\] hub 5-0:1.0: 8 ports detected
\[ 5.180247\] hub 1-0:1.0: USB hub found
\[ 5.180269\] hub 1-0:1.0: 2 ports detected
\[ 5.180956\] hub 2-0:1.0: USB hub found
\[ 5.180985\] hub 2-0:1.0: 2 ports detected
\[ 5.184613\] hub 3-0:1.0: USB hub found
\[ 5.184644\] hub 3-0:1.0: 2 ports detected
\[ 5.186959\] hub 4-0:1.0: USB hub found
\[ 5.186982\] hub 4-0:1.0: 2 ports detected
\[ 5.204972\] xen: registering gsi 19 triggering 0 polarity 1
\[ 5.204986\] Already setup the GSI :19
\[ 5.205059\] i801\_smbus 0000:00:1f.3: SMBus using PCI Interrupt
\[ 5.545786\] EXT4-fs (sda2): mounted filesystem with ordered data mode.
Opts: (null)
\[ 5.794304\] usb 5-8: new high-speed USB device number 4 using
ehci-pci
\[ 5.918009\] usb 5-8: New USB device found, idVendor=058f,
idProduct=6254
\[ 5.918018\] usb 5-8: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
\[ 5.919235\] hub 5-8:1.0: USB hub found
\[ 5.919416\] hub 5-8:1.0: 4 ports detected
\[ 6.384292\] usb 2-2: new low-speed USB device number 2 using
uhci\_hcd
\[ 6.500953\] usb 2-2: device descriptor read/64, error –71
\[ 6.720998\] usb 2-2: device descriptor read/64, error –71
\[ 6.930962\] usb 2-2: new low-speed USB device number 3 using
uhci\_hcd
\[ 6.991598\] udevd\[896\]: starting version 175
\[ 7.047637\] usb 2-2: device descriptor read/64, error –71
\[ 7.267663\] usb 2-2: device descriptor read/64, error –71
*(from redmine: issue id 2836, created on 2014-04-10, closed on 2014-05-28)*
* Relations:
* copied_to #2965https://gitlab.alpinelinux.org/alpine/aports/-/issues/2835Freeradius fail to start2019-07-23T14:07:40ZLingbing JiangFreeradius fail to startThis is the second time I saw that libssl upgrade broke freeradius.
Maybe there is a build tool issue here always prevent the freeradius got
built with the latest libssl.
localhost:/var/log\# /usr/sbin/radiusd -X
libssl version mismat...This is the second time I saw that libssl upgrade broke freeradius.
Maybe there is a build tool issue here always prevent the freeradius got
built with the latest libssl.
localhost:/var/log\# /usr/sbin/radiusd -X
libssl version mismatch. Built with: 1000106f Linked: 1000107f
*(from redmine: issue id 2835, created on 2014-04-08, closed on 2015-12-09)*
* Changesets:
* Revision b58ac471f72c5b941fc07f27abddcc7d82aed2e8 on 2014-04-08T16:43:16Z:
```
main/freeradius: rebuild against new openssl. Fixes #2835
```
* Revision 21261928b01ff60012fcc177a859cc859e39303c on 2014-04-08T16:44:15Z:
```
main/freeradius: rebuild against new openssl. Fixes #2835
(cherry picked from commit b58ac471f72c5b941fc07f27abddcc7d82aed2e8)
```
* Revision b62a86b8d8ef8eb4b0b40d08579ee546938ce827 on 2014-04-08T16:48:39Z:
```
main/freeradius: rebuild against new openssl. Fixes #2835
```
* Revision 3b20c957e35fd291082cd04a309ebab3075675a8 on 2014-04-08T16:58:35Z:
```
main/freeradius: rebuild against new openssl. Fixes #2835
```https://gitlab.alpinelinux.org/alpine/aports/-/issues/2833Package request: EnhanceIO kernel module2020-01-18T20:17:37Zmastr y0daPackage request: EnhanceIO kernel moduleWould it be possible to get an Enhance-Io Package built?
-m
*(from redmine: issue id 2833, created on 2014-04-06)*Would it be possible to get an Enhance-Io Package built?
-m
*(from redmine: issue id 2833, created on 2014-04-06)*https://gitlab.alpinelinux.org/alpine/aports/-/issues/2832ZFS on Linux package2019-07-23T13:51:28Zmastr y0daZFS on Linux packageWould it be possible to get a zfsonlinux package for alpinelinux?
I was considering trying to build it myself, but i can’t seem to
track down any documentation on pulling the sources to build against?
*(from redmine: issue id 2832,...Would it be possible to get a zfsonlinux package for alpinelinux?
I was considering trying to build it myself, but i can’t seem to
track down any documentation on pulling the sources to build against?
*(from redmine: issue id 2832, created on 2014-04-06, closed on 2015-12-09)*
* Relations:
* relates #4434
* relates #43703.3.0https://gitlab.alpinelinux.org/alpine/aports/-/issues/2830[v2.7] openswan: remote DoS (CVE-2013-6466)2019-07-23T14:10:15ZAlexander Belous[v2.7] openswan: remote DoS (CVE-2013-6466)Openswan 2.6.39 and earlier allows remote attackers to cause a denial of
service (NULL pointer dereference and IKE daemon restart) via IKEv2
packets that lack expected payloads.
•MISC: https://libreswan.org/security/CVE-2013-6467/CVE-20...Openswan 2.6.39 and earlier allows remote attackers to cause a denial of
service (NULL pointer dereference and IKE daemon restart) via IKEv2
packets that lack expected payloads.
•MISC: https://libreswan.org/security/CVE-2013-6467/CVE-2013-6467.txt
•REDHAT:RHSA-2014:0185
•URL: http://rhn.redhat.com/errata/RHSA-2014-0185.html
•XF:openswan-cve20136466-dos(90524)
•URL: http://xforce.iss.net/xforce/xfdb/90524
*(from redmine: issue id 2830, created on 2014-04-03, closed on 2014-04-21)*
* Relations:
* parent #2826
* Changesets:
* Revision f61b6c8609c53376958880ab2a1741f6888859a4 by Timo Teräs on 2014-04-17T09:01:16Z:
```
main/openswan: security upgrade to 2.6.41 (CVE-2013-6466)
fixes #2830
```Alpine 2.7.6Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/2829[v2.6] openswan: remote DoS (CVE-2013-6466)2019-07-23T14:10:16ZAlexander Belous[v2.6] openswan: remote DoS (CVE-2013-6466)Openswan 2.6.39 and earlier allows remote attackers to cause a denial of
service (NULL pointer dereference and IKE daemon restart) via IKEv2
packets that lack expected payloads.
•MISC: https://libreswan.org/security/CVE-2013-6467/CVE-20...Openswan 2.6.39 and earlier allows remote attackers to cause a denial of
service (NULL pointer dereference and IKE daemon restart) via IKEv2
packets that lack expected payloads.
•MISC: https://libreswan.org/security/CVE-2013-6467/CVE-2013-6467.txt
•REDHAT:RHSA-2014:0185
•URL: http://rhn.redhat.com/errata/RHSA-2014-0185.html
•XF:openswan-cve20136466-dos(90524)
•URL: http://xforce.iss.net/xforce/xfdb/90524
*(from redmine: issue id 2829, created on 2014-04-03, closed on 2014-04-21)*
* Relations:
* parent #2826
* Changesets:
* Revision 59f82a99051677a0a8ffbd33585293f529cf627c by Timo Teräs on 2014-04-18T14:45:15Z:
```
main/openswan: security upgrade to 2.6.41 (CVE-2013-6466)
fixes #2829
```
* Revision 95c7f93375ff9e15f0ccd68ff25ae08f230dec98 by Timo Teräs on 2014-04-18T14:46:38Z:
```
main/openswan: security upgrade to 2.6.41 (CVE-2013-6466)
fixes #2829
```Alpine 2.6.7Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/2828[v2.5] openswan: remote DoS (CVE-2013-6466)2019-07-23T14:10:17ZAlexander Belous[v2.5] openswan: remote DoS (CVE-2013-6466)Openswan 2.6.39 and earlier allows remote attackers to cause a denial of
service (NULL pointer dereference and IKE daemon restart) via IKEv2
packets that lack expected payloads.
•MISC: https://libreswan.org/security/CVE-2013-6467/CVE-20...Openswan 2.6.39 and earlier allows remote attackers to cause a denial of
service (NULL pointer dereference and IKE daemon restart) via IKEv2
packets that lack expected payloads.
•MISC: https://libreswan.org/security/CVE-2013-6467/CVE-2013-6467.txt
•REDHAT:RHSA-2014:0185
•URL: http://rhn.redhat.com/errata/RHSA-2014-0185.html
•XF:openswan-cve20136466-dos(90524)
•URL: http://xforce.iss.net/xforce/xfdb/90524
*(from redmine: issue id 2828, created on 2014-04-03, closed on 2014-04-21)*
* Relations:
* parent #2826Alpine 2.5.5Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/2827[v2.4] openswan: remote DoS (CVE-2013-6466)2019-07-23T14:10:18ZAlexander Belous[v2.4] openswan: remote DoS (CVE-2013-6466)Openswan 2.6.39 and earlier allows remote attackers to cause a denial of
service (NULL pointer dereference and IKE daemon restart) via IKEv2
packets that lack expected payloads.
•MISC: https://libreswan.org/security/CVE-2013-6467/CVE-20...Openswan 2.6.39 and earlier allows remote attackers to cause a denial of
service (NULL pointer dereference and IKE daemon restart) via IKEv2
packets that lack expected payloads.
•MISC: https://libreswan.org/security/CVE-2013-6467/CVE-2013-6467.txt
•REDHAT:RHSA-2014:0185
•URL: http://rhn.redhat.com/errata/RHSA-2014-0185.html
•XF:openswan-cve20136466-dos(90524)
•URL: http://xforce.iss.net/xforce/xfdb/90524
*(from redmine: issue id 2827, created on 2014-04-03, closed on 2014-04-21)*
* Relations:
* parent #2826
* Changesets:
* Revision 1df893d29e73824172978ca87bc5575b1fcace34 by Timo Teräs on 2014-04-18T15:04:02Z:
```
main/openswan: security upgrade to 2.6.41 (CVE-2013-6466)
fixes #2827
```Alpine 2.4.12Natanael CopaNatanael Copa