aports issueshttps://gitlab.alpinelinux.org/alpine/aports/-/issues2022-02-01T01:50:27Zhttps://gitlab.alpinelinux.org/alpine/aports/-/issues/13006https://docs.alpinelinux.org/ sometimes returns error2022-02-01T01:50:27ZGridexXhttps://docs.alpinelinux.org/ sometimes returns errorOn the [official website](https://www.alpinelinux.org/), the link associated with the [docs](https://docs.alpinelinux.org/) button is dead.On the [official website](https://www.alpinelinux.org/), the link associated with the [docs](https://docs.alpinelinux.org/) button is dead.https://gitlab.alpinelinux.org/alpine/aports/-/issues/13004unlocking LUKS volume at boot fails2023-03-03T01:56:46ZJohn Smithunlocking LUKS volume at boot failsAfter upgrading my system (edge repos), I can no longer open a LUKS encrypted rootfs using a detached header. After entering my passphrase, I get the message "Keyslot open failed.
No key available with this passphrase."
Relevant kernel...After upgrading my system (edge repos), I can no longer open a LUKS encrypted rootfs using a detached header. After entering my passphrase, I get the message "Keyslot open failed.
No key available with this passphrase."
Relevant kernel parameters: "cryptroot=/dev/nvme0n1p1 cryptheader=/boot/header cryptdm=alpine"
I'm using the latest available packages versions. (cryptsetup 2.4.0-r2, linux-lts 5.10.63-r1)https://gitlab.alpinelinux.org/alpine/aports/-/issues/13003Package Request: swaystatus2021-09-17T06:06:06ZflatterlightPackage Request: swaystatusHi,
it would be a nice addition for a sway desktop.
The sourcecode, build instructions and config documentation are available on Github -> https://github.com/NobodyXu/swaystatus.
thanks for your time.Hi,
it would be a nice addition for a sway desktop.
The sourcecode, build instructions and config documentation are available on Github -> https://github.com/NobodyXu/swaystatus.
thanks for your time.https://gitlab.alpinelinux.org/alpine/aports/-/issues/12978RasPi4 sys loses network connectivity2021-09-05T16:33:46ZKenDickeyRasPi4 sys loses network connectivityInstalled Alpine on RasPi4, did apk update el al.
Basically followed pattern of
https://wiki.alpinelinux.org/wiki/Raspberry_Pi_4_-_Persistent_system_acting_as_a_NAS_and_Time_Machine
Has to comment out check/guard for RasPi in setup-d...Installed Alpine on RasPi4, did apk update el al.
Basically followed pattern of
https://wiki.alpinelinux.org/wiki/Raspberry_Pi_4_-_Persistent_system_acting_as_a_NAS_and_Time_Machine
Has to comment out check/guard for RasPi in setup-disk
but boots fine. Runs 32 bit framebuffer app (Cuis Smalltalk) and Xfce4.
BUT dhcp fails now, so no apk. :^(
Tried various wpa_supplicant and networking setup; setup-interface et al, but no joy.
Low level indicates CTRL-EVENT-ASSOC-REJECTED; status code = 16, ..CONN_FAILED
Any help here?
Thanks much,
-KenDhttps://gitlab.alpinelinux.org/alpine/aports/-/issues/12976scripts: Generic RISC-V image2021-12-04T10:04:27ZSören Tempelscripts: Generic RISC-V imageIt would be neat to have the scripts in `./scripts` generate a generic image for `riscv64`, analog to `mkimg.arm.sh`. This generic image could then be used by scripts generating board-specific images, e.g. https://gitlab.alpinelinux.org/...It would be neat to have the scripts in `./scripts` generate a generic image for `riscv64`, analog to `mkimg.arm.sh`. This generic image could then be used by scripts generating board-specific images, e.g. https://gitlab.alpinelinux.org/nmeum/alpine-unmatched, to generate bootable images for RISC-V boards such as the [HiFive Unmatched](https://www.sifive.com/boards/hifive-unmatched).
My present understanding is that we are not going to ship RISC-V release image until we have actual hardware for building `riscv64` packages, instead of relying on `qemu-riscv64` for this purpose. Furthermore, `linux-lts` currently does not yet support the Unmatched.https://gitlab.alpinelinux.org/alpine/aports/-/issues/12971Kernel segfault when probing VIA VT6122 10/100/1000 driver2024-01-30T12:43:30ZJ RBKernel segfault when probing VIA VT6122 10/100/1000 driverAttempting to install Alpine-3.14.2 via USB always resulted in a kernel panic ( https://imgur.com/a/9vAaePD)
downloaded 3.12.8 and successfully booted, installed, rebooted.
change the repositories to use 3.14 and upgraded on-disk insta...Attempting to install Alpine-3.14.2 via USB always resulted in a kernel panic ( https://imgur.com/a/9vAaePD)
downloaded 3.12.8 and successfully booted, installed, rebooted.
change the repositories to use 3.14 and upgraded on-disk install, rebooted and again experienced a kernel panic.
edited boot parameters at grub to include init=/bin/ash and booted to edit /etc/rc.conf to enable interactive mode.
In doing so, aspects of networking, especially probing the associated driver, result in a kernel panic.
via-velocity is the module associated with the onboard VIA VT6122 Gigabit Ethernet controller.
Re-installing with 3.12.8 for nowNatanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/12947package-request: doublecmd2021-10-05T00:32:49ZJohn DVDpackage-request: doublecmddoublecommander (doublecmd) is a great file-manager which is two-sided and does multiple tabs per side.
It should be integrated into alpine-repository.
see http://doublecmd.sourceforge.io
thxdoublecommander (doublecmd) is a great file-manager which is two-sided and does multiple tabs per side.
It should be integrated into alpine-repository.
see http://doublecmd.sourceforge.io
thxhttps://gitlab.alpinelinux.org/alpine/aports/-/issues/12940Package Request: glogg2022-03-19T22:39:15ZSaijin-NaibPackage Request: glogghttp://glogg.bonnefon.org/index.html
Glogg is a really neat graphical log viewer which can live-reload files, summarize "hits", and allows for customized regex or search-based highlighting of the logs, which can be pretty incredible for...http://glogg.bonnefon.org/index.html
Glogg is a really neat graphical log viewer which can live-reload files, summarize "hits", and allows for customized regex or search-based highlighting of the logs, which can be pretty incredible for when you're routinely parsing logs looking for issues.
I was able to build it locally under Alpine 3.14.x x64, with no need to apply patches. I've started reading the abuild documentation, but I doubt my ability to complete the process properly for proper submittal.
Also, the app icon didn't generate, so I did something wrong during build/install locally. But in general, I think this one is a pretty cut & dry "easy" patchless build. I think.
----
![image](/uploads/d21271939b8bdd6f156f4bec7ff468a0/image.png)
![image](/uploads/c3ac5fa617f19aa22c4ff7ee8121a67e/image.png)
![image](/uploads/2a5ffdb22d4298ef9db9738260196497/image.png)https://gitlab.alpinelinux.org/alpine/aports/-/issues/12936mosh client segfaults randomly on edge aarch642021-09-14T07:22:16ZMilan P. Stanićmosh client segfaults randomly on edge aarch64I think it is related to protobuf lib because I get this on terminal when mosh client segfaults
```
[(status)] [libprotobuf FATAL /usr/include/google/protobuf/arenastring.h:369] CHECK failed: !tagged_ptr_.IsTagged():
irc 1 irssi 2 ...I think it is related to protobuf lib because I get this on terminal when mosh client segfaults
```
[(status)] [libprotobuf FATAL /usr/include/google/protobuf/arenastring.h:369] CHECK failed: !tagged_ptr_.IsTagged():
irc 1 irssi 2 tcsh [libprotobuf FATAL /usr/include/google/protobuf/arenastr>
terminate called after throwing an instance of 'google::protobuf::FatalException'
what(): CHECK failed: !tagged_ptr_.IsTag>
Abort
```https://gitlab.alpinelinux.org/alpine/aports/-/issues/12932net-snmp(snmpd) apk install service crashed on x86 3.14.1 and edge(3.15)2022-09-07T08:51:41ZRon Kwannet-snmp(snmpd) apk install service crashed on x86 3.14.1 and edge(3.15)fresh installed 3.14.1 on n270 x86 with net-snmp 5.9r4 and default snmpd.conf except one line enabled;
rocommunity public localhost
snmpd serviced crashed after a coouple hours, more or less
same thing happened after system upgraded t...fresh installed 3.14.1 on n270 x86 with net-snmp 5.9r4 and default snmpd.conf except one line enabled;
rocommunity public localhost
snmpd serviced crashed after a coouple hours, more or less
same thing happened after system upgraded to edge with net-snmp 5.9.1-r1
i've also tried inside a virtualbox client (win host) and same thing happened.
please investigate, much thanks.https://gitlab.alpinelinux.org/alpine/aports/-/issues/12931Add support for Hardkernel Odroid xu4 and family2022-08-21T15:18:07ZDavy LandmanAdd support for Hardkernel Odroid xu4 and familyIt would be nice if the generic armv7 build of alpine would include uboot for odroid xu4 as well.
The dtbs are already there, but the u-boot is not configured with it yet.
I have a xu4 and I think the right serial monitor, so I can do ...It would be nice if the generic armv7 build of alpine would include uboot for odroid xu4 as well.
The dtbs are already there, but the u-boot is not configured with it yet.
I have a xu4 and I think the right serial monitor, so I can do some testing.Milan P. StanićMilan P. Stanićhttps://gitlab.alpinelinux.org/alpine/aports/-/issues/12926Package request: loop2021-08-29T17:43:52ZnevinenPackage request: looploop lets you write powerful, intuitive looping one-liners in your favorite shell! Finally, loops in Bash that make sense!
Homepage: https://github.com/Miserlou/Loop , this software source code is already very stable.loop lets you write powerful, intuitive looping one-liners in your favorite shell! Finally, loops in Bash that make sense!
Homepage: https://github.com/Miserlou/Loop , this software source code is already very stable.https://gitlab.alpinelinux.org/alpine/aports/-/issues/12916Add a runtime dependency to gpsd-clients or split the package2021-08-12T19:27:33ZBenoit RozelAdd a runtime dependency to gpsd-clients or split the package`py3-cairo` and `py3-gpsd` are runtime dependencies of the programs `xgps` and `xgpsspeed` provide by `gpsd-clients`.
Either add this runtime dependency to the package, or split the package (or remove these two programs of the package).`py3-cairo` and `py3-gpsd` are runtime dependencies of the programs `xgps` and `xgpsspeed` provide by `gpsd-clients`.
Either add this runtime dependency to the package, or split the package (or remove these two programs of the package).https://gitlab.alpinelinux.org/alpine/aports/-/issues/12915openvas, gvm-libs, nmap segfaults or traps2021-08-13T15:24:25ZJosef Fröhlegithub@josef-froehle.deopenvas, gvm-libs, nmap segfaults or traps**Describe the bug**
When scanning, often the process is "interrupted" before completing, and messages such as these shows up in dmesg on the host.
openvas randomly segfaults, and nmap segfaults or traps. The results are unreliable, as ...**Describe the bug**
When scanning, often the process is "interrupted" before completing, and messages such as these shows up in dmesg on the host.
openvas randomly segfaults, and nmap segfaults or traps. The results are unreliable, as hosts or services are missed, even if the scanning does not end up as interrupted.
```
[ 2693.808760] traps: nmap[35860] trap invalid opcode ip:55817d153440 sp:7fffb5e326e0 error:0 in nmap[55817d105000+8e000]
[ 3359.422992] traps: nmap[49098] trap invalid opcode ip:564ed9eca440 sp:7ffe1c1e2010 error:0 in nmap[564ed9e7c000+8e000]
[ 3362.479530] traps: nmap[49100] trap invalid opcode ip:55abef014440 sp:7fffbe46dce0 error:0 in nmap[55abeefc6000+8e000]
[ 3440.949354] traps: nmap[49061] trap invalid opcode ip:55fd5d253440 sp:7fff20e88640 error:0 in nmap[55fd5d205000+8e000]
[ 3453.341204] nmap[49004]: segfault at 7efe666dd020 ip 000055dfacbe9448 sp 00007fffde1dc920 error 4 in nmap[55dfacb9b000+8e000]
[ 3453.341216] Code: 24 08 0f b7 cb 48 39 e8 73 09 48 8d 14 08 48 39 d5 72 0f 48 39 e8 76 0c 48 8d 54 0d 00 48 39 d0 73 02 0f 0b 48 89 c7 48 89 ee <f3> a4 66 41 c7 44 24 06 00 00 4c 89 e0 5a 5b 5d 41 5c 41 5d 41 5e
[ 4191.012447] traps: nmap[70547] trap invalid opcode ip:55949bb89440 sp:7ffc176d6d00 error:0 in nmap[55949bb3b000+8e000]
[ 5130.462535] traps: nmap[91191] trap invalid opcode ip:558715bcc440 sp:7fff806baaf0 error:0 in nmap[558715b7e000+8e000]
[ 7261.504889] traps: nmap[127905] trap invalid opcode ip:5626d9ef7440 sp:7ffc469912b0 error:0 in nmap[5626d9ea9000+8e000]
[ 9403.617868] openvas[2488]: segfault at 7f498fae1d80 ip 00007f4991a76313 sp 00007fff87ed2610 error 4 in libgvm_base.so.21.4.2[7f4991a74000+8000]
[ 9403.617879] Code: 5d 41 5e 41 5f c3 55 48 89 fd bf 10 00 00 00 53 48 89 f3 50 e8 1e df ff ff 48 89 28 48 89 58 08 5a 5b 5d c3 48 85 ff 74 2b 55 <83> 7f 10 00 48 89 fd 75 08 48 8b 3f e8 94 e8 ff ff 48 8b 7d 18 48
[20059.115781] traps: openvas[161562] general protection fault ip:7f627b0a1896 sp:7fffe0c00948 error:0 in ld-musl-x86_64.so.1[7f627b093000+48000]
[20338.874947] traps: nmap[167472] trap invalid opcode ip:55816621e440 sp:7ffef834f8e0 error:0 in nmap[5581661d0000+8e000]
[39743.448666] traps: openvas[48511] general protection fault ip:7fb82608d896 sp:7fffb961cff8 error:0 in ld-musl-x86_64.so.1[7fb82607f000+48000]
[42038.536454] openvas[72556]: segfault at 0 ip 00007f2fcd70a081 sp 00007ffdc4a7f5a8 error 4 in ld-musl-x86_64.so.1[7f2fcd6d0000+48000]
[42038.536467] Code: 20 c7 44 24 0c 30 00 00 00 48 89 44 24 18 e8 ce fe ff ff 48 81 c4 d8 00 00 00 c3 89 f8 99 31 d0 29 d0 c3 31 f6 e9 7d 09 00 00 <0f> be 17 89 d0 83 ea 09 83 fa 04 77 05 48 ff c7 eb ee 3c 20 74 f7
[54412.214396] traps: openvas[144887] general protection fault ip:7f3844d4f896 sp:7ffccc6df338 error:0 in ld-musl-x86_64.so.1[7f3844d41000+48000]
[81753.907458] traps: nmap[330293] trap invalid opcode ip:5609dabcc440 sp:7fff86095920 error:0 in nmap[5609dab7e000+8e000]
[81852.061828] nmap[330299]: segfault at 7f1fb29a0020 ip 00005589dbcb2448 sp 00007ffe740c76a0 error 4 in nmap[5589dbc64000+8e000]
[81852.061866] Code: 24 08 0f b7 cb 48 39 e8 73 09 48 8d 14 08 48 39 d5 72 0f 48 39 e8 76 0c 48 8d 54 0d 00 48 39 d0 73 02 0f 0b 48 89 c7 48 89 ee <f3> a4 66 41 c7 44 24 06 00 00 4c 89 e0 5a 5b 5d 41 5c 41 5d 41 5e
[81915.730041] traps: nmap[330307] trap invalid opcode ip:559711ad3440 sp:7ffc79e170b0 error:0 in nmap[559711a85000+8e000]
[82046.006118] traps: nmap[339261] trap invalid opcode ip:55a2f8890440 sp:7fffdbbab200 error:0 in nmap[55a2f8842000+8e000]
[82205.134292] traps: nmap[347358] trap invalid opcode ip:557c04521440 sp:7ffc7aa75510 error:0 in nmap[557c044d3000+8e000]
[82251.198955] traps: nmap[351206] trap invalid opcode ip:562658bea440 sp:7fff706de6e0 error:0 in nmap[562658b9c000+8e000]
[82404.256601] traps: nmap[363056] trap invalid opcode ip:55ac34db6440 sp:7ffe30cf4f70 error:0 in nmap[55ac34d68000+8e000]
[82960.779933] traps: nmap[376132] trap invalid opcode ip:56457442a440 sp:7ffcee51e470 error:0 in nmap[5645743dc000+8e000]
[83482.088115] traps: nmap[396343] trap invalid opcode ip:559faf5fc440 sp:7fff817eb360 error:0 in nmap[559faf5ae000+8e000]
[83485.654411] traps: nmap[398085] trap invalid opcode ip:5631cbbba440 sp:7ffdb22b3ad0 error:0 in nmap[5631cbb6c000+8e000]
[83701.749437] nmap[404134]: segfault at 7fde00003020 ip 0000559481cdb448 sp 00007ffe68d6c540 error 4 in nmap[559481c8d000+8e000]
[83701.749447] Code: 24 08 0f b7 cb 48 39 e8 73 09 48 8d 14 08 48 39 d5 72 0f 48 39 e8 76 0c 48 8d 54 0d 00 48 39 d0 73 02 0f 0b 48 89 c7 48 89 ee <f3> a4 66 41 c7 44 24 06 00 00 4c 89 e0 5a 5b 5d 41 5c 41 5d 41 5e
[84947.667435] traps: nmap[432432] trap invalid opcode ip:5566ae0a1440 sp:7ffd2a52f780 error:0 in nmap[5566ae053000+8e000]
[85905.583853] nmap[448314]: segfault at 7fed19cca020 ip 000055a60fbde448 sp 00007ffd5e8935e0 error 4 in nmap[55a60fb90000+8e000]
[85905.583864] Code: 24 08 0f b7 cb 48 39 e8 73 09 48 8d 14 08 48 39 d5 72 0f 48 39 e8 76 0c 48 8d 54 0d 00 48 39 d0 73 02 0f 0b 48 89 c7 48 89 ee <f3> a4 66 41 c7 44 24 06 00 00 4c 89 e0 5a 5b 5d 41 5c 41 5d 41 5e
[86291.951492] traps: nmap[458906] trap invalid opcode ip:55b732c21440 sp:7fffdad874c0 error:0 in nmap[55b732bd3000+8e000]
[88792.139689] traps: openvas[376047] general protection fault ip:7f6f0cdb1896 sp:7ffce68edc48 error:0 in ld-musl-x86_64.so.1[7f6f0cda3000+48000]
[91899.867229] traps: nmap[489571] trap invalid opcode ip:5641d022e440 sp:7fff95dfe730 error:0 in nmap[5641d01e0000+8e000]
[91918.141517] traps: nmap[489592] trap invalid opcode ip:560cb5499440 sp:7ffe286d8cd0 error:0 in nmap[560cb544b000+8e000]
[91948.451528] traps: nmap[489598] trap invalid opcode ip:56160af38440 sp:7fffb7ed41a0 error:0 in nmap[56160aeea000+8e000]
[91967.426301] traps: nmap[489580] trap invalid opcode ip:55cfa6100440 sp:7fffd6ec3110 error:0 in nmap[55cfa60b2000+8e000]
[92294.752484] traps: nmap[491526] trap invalid opcode ip:5626df88f440 sp:7fffced184e0 error:0 in nmap[5626df841000+8e000]
[92589.964141] traps: nmap[493348] trap invalid opcode ip:56508ad73440 sp:7ffd26f2c600 error:0 in nmap[56508ad25000+8e000]
[93833.598764] traps: openvas[489491] general protection fault ip:7f3b38d8c896 sp:7ffd272f0c58 error:0 in ld-musl-x86_64.so.1[7f3b38d7e000+48000]
```
**Steps to reproduce the behavior:**
Just running a simple scanning.
- Target has 32 IP addresses
- Alive Test: Consider Alive
- Scanning Config: Full and fast (unmodified)
Expected behavior
Finalized scanning with no code errors, and all hosts covered in the result.
**core dumps can be fround on **
https://github.josef-froehle.de/cores.tar.gz
```
gdb /usr/bin/openvas /core.openvas
GNU gdb (GDB) 10.2
Copyright (C) 2021 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Type "show copying" and "show warranty" for details.
This GDB was configured as "x86_64-alpine-linux-musl".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<https://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from /usr/bin/openvas...
(No debugging symbols found in /usr/bin/openvas)
[New LWP 8854]
Core was generated by `openvas --scan-start 73fb6771-3823-42b5-886e-302b6df32ea2'.
Program terminated with signal SIGSEGV, Segmentation fault.
#0 get_meta (p=p@entry=0x7f3b50cfd550 "±\373", <incomplete sequence \311>) at src/malloc/mallocng/meta.h:141
141 src/malloc/mallocng/meta.h: No such file or directory.
```https://gitlab.alpinelinux.org/alpine/aports/-/issues/12913nginx: Don't use nginx' custom memory allocator2021-08-21T20:00:55Zjvoisinnginx: Don't use nginx' custom memory allocatorNginx uses its [own memory allocator]( https://github.com/nginx/nginx/blob/master/src/core/ngx_palloc.c ), tailored for [speed and efficiency]( https://forum.nginx.org/read.php?29,228121,228126#msg-228126 ), and unfortunately, it doesn't...Nginx uses its [own memory allocator]( https://github.com/nginx/nginx/blob/master/src/core/ngx_palloc.c ), tailored for [speed and efficiency]( https://forum.nginx.org/read.php?29,228121,228126#msg-228126 ), and unfortunately, it doesn't have any security feature at all: no defenses against buffer overrun and use-after-free, unprotected metadata (with function pointers in them), no double/invalid-free detection, … Fortunately, there is a [way to disabled it]( https://nginx.org/en/docs/dev/development_guide.html#debug_memory ) and use the [default allocator]( https://git.musl-libc.org/cgit/musl/commit/?id=503bd3976623493a10b0f32c617feb51f9ba04c8 ) instead, by compiling nginx with `auto/configure --with-cc-opt='-DNGX_DEBUG_PALLOC=1'`.
Since musl's allocator is quite performant, there shouldn't™ be any noticeable (if at all) performance impact.https://gitlab.alpinelinux.org/alpine/aports/-/issues/12908Package request: pgroonga2021-08-11T06:50:13Z杨文 陈Package request: pgroongahttps://github.com/pgroonga/pgroongahttps://github.com/pgroonga/pgroongahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/12903Package request: gpac2021-08-08T11:20:17ZFengying ZhaoPackage request: gpachttps://github.com/gpac/gpachttps://github.com/gpac/gpachttps://gitlab.alpinelinux.org/alpine/aports/-/issues/12895[3.11, 3.12, 3.13] main/ruby-bundler: vulnerable to CVE-2020-363272021-08-04T14:42:38ZAriadne Conillariadne@ariadne.space[3.11, 3.12, 3.13] main/ruby-bundler: vulnerable to CVE-2020-36327Hello,
The security team is not certain what the best way to fix this issue is, due to lack of familiarity with the Ruby ecosystem. So, I am opening this bug to allow somebody with more experience in the Ruby ecosystem to help find a m...Hello,
The security team is not certain what the best way to fix this issue is, due to lack of familiarity with the Ruby ecosystem. So, I am opening this bug to allow somebody with more experience in the Ruby ecosystem to help find a mitigation. Specifically, we do not know what effect upgrading Bundler would have for users using it in production.
## Description
Bundler 1.16.0 through 2.2.9 and 2.2.11 through 2.2.16 sometimes chooses a dependency source based on the highest gem version number, which means that a rogue gem found at a public source may be chosen, even if the intended choice was a private gem that is a dependency of another private gem that is explicitly depended on by the application.
## Affected Branches
- [ ] 3.11-stable (`2.0.2-r1`)
- [ ] 3.12-stable (`2.1.4-r1`)
- [ ] 3.13-stable (`2.2.2-r0`)
Please fix according to what you think is appropriate, and then record the appropriate secfixes entries in the APKBUILD. Thanks!Jakub JirutkaJakub Jirutkahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/12890Add numpy to boost-python2021-08-02T16:29:04ZMonkeyKhanAdd numpy to boost-pythonAlpine's boost-python does not contain the NumPy extension, which is an optional component in https://github.com/boostorg/python.Alpine's boost-python does not contain the NumPy extension, which is an optional component in https://github.com/boostorg/python.https://gitlab.alpinelinux.org/alpine/aports/-/issues/12879Package request: matio2021-07-28T18:07:37ZJ0WIPackage request: matiohttps://github.com/tbeu/matiohttps://github.com/tbeu/matio