aports issues
https://gitlab.alpinelinux.org/alpine/aports/-/issues
2019-07-12T14:23:35Z
https://gitlab.alpinelinux.org/alpine/aports/-/issues/169
solve the hda/sda swapping
2019-07-12T14:23:35Z
Natanael Copa
solve the hda/sda swapping
Problem When booting from cd or usb disk shows up as sdX. after run setup-disk the disk shows up as hdX and boot fails.
---------------------------------------------------------------------------------------------------------------------...
Problem When booting from cd or usb disk shows up as sdX. after run setup-disk the disk shows up as hdX and boot fails.
-----------------------------------------------------------------------------------------------------------------------
Reason The ide drivers gets loaded first. Which is loaded first seems to depend on how/when depmod was run and is completetly unpredictable.
--------------------------------------------------------------------------------------------------------------------------------------------
### Solution 1. Use UUID=… instead of devices in fstab and exlinux.conf 2. disable the IDE drivers and use scsi emulation only. (/dev/hdX will dissapear) This is what debian, ubuntu and fedora does.
*(from redmine: issue id 169, created on 2009-09-18, closed on 2009-10-02)*
* Changesets:
* Revision 529426cca93f7466eda8392b82e9dd4bc97b54ea on 2009-09-18T09:53:02Z:
```
main/alpine-conf: use uuid in setup-disk
fixes #169
```
Alpine 1.9
Natanael Copa
Natanael Copa
https://gitlab.alpinelinux.org/alpine/aports/-/issues/168
kamailio-1.5.2-r4 compiled for wrong config file
2019-07-12T14:23:35Z
Nathan Angelacos
kamailio-1.5.2-r4 compiled for wrong config file
kamailio-1.5.2-r4.apk contains a file /etc/kamailiokamailio.cfg
It should be /etc/kamailio/kamailio.cfg
the kamailio binary also looks for the wrong config file.
As far as an extra “what would be nice” feature, it would be nice if the...
kamailio-1.5.2-r4.apk contains a file /etc/kamailiokamailio.cfg
It should be /etc/kamailio/kamailio.cfg
the kamailio binary also looks for the wrong config file.
As far as an extra “what would be nice” feature, it would be nice if the
init script parsed /etc/conf.d/kamailio for DAEMON\_OPTS and used
whatever was there (with /etc/kamailio/kamailio.cfg being the default)
*(from redmine: issue id 168, created on 2009-09-16, closed on 2009-10-02)*
Alpine 1.9
Natanael Copa
Natanael Copa
https://gitlab.alpinelinux.org/alpine/aports/-/issues/167
setup-disk should detect vmware and add needed pax_nouderef to to extlinux.conf
2019-07-12T14:23:34Z
Natanael Copa
setup-disk should detect vmware and add needed pax_nouderef to to extlinux.conf
alpine is currently broken on vmware by default:
http://forums.grsecurity.net/viewtopic.php?f=3&t=2191
We can detect vmware by looking at the disks:
http://www.dmo.ca/blog/detecting-virtualization-on-linux/
*(from redmine: issue i...
alpine is currently broken on vmware by default:
http://forums.grsecurity.net/viewtopic.php?f=3&t=2191
We can detect vmware by looking at the disks:
http://www.dmo.ca/blog/detecting-virtualization-on-linux/
*(from redmine: issue id 167, created on 2009-09-16, closed on 2009-09-22)*
Alpine 1.9
Natanael Copa
Natanael Copa
https://gitlab.alpinelinux.org/alpine/aports/-/issues/165
downgrade php to 5.2.10
2019-07-12T14:23:32Z
Natanael Copa
downgrade php to 5.2.10
may apps does not support php-5.3 yet so for 1.9 release we want 5.2.x.
*(from redmine: issue id 165, created on 2009-09-14, closed on 2009-10-02)*
* Changesets:
* Revision 62204a7e4be77192725f28e728641da5be5ed24b on 2009-09-14T15:0...
may apps does not support php-5.3 yet so for 1.9 release we want 5.2.x.
*(from redmine: issue id 165, created on 2009-09-14, closed on 2009-10-02)*
* Changesets:
* Revision 62204a7e4be77192725f28e728641da5be5ed24b on 2009-09-14T15:08:37Z:
```
*/php: move php-5.3 to testing and downgrade main/php to 5.2.10
many apps needs 5.2
fixes #165
```
Alpine 1.9
https://gitlab.alpinelinux.org/alpine/aports/-/issues/161
package request: some kind of cli sip softphone
2019-07-12T14:23:30Z
algitbot
package request: some kind of cli sip softphone
for testing kamailio and asterisk, it would be useful to have a sip
softphone that runs on alpine
http://www.pjsip.org/pjsua.htm
Seems to be a likely candidate
Another project that depends on pjlib is dmtfbox, which seems to be a
mini...
for testing kamailio and asterisk, it would be useful to have a sip
softphone that runs on alpine
http://www.pjsip.org/pjsua.htm
Seems to be a likely candidate
Another project that depends on pjlib is dmtfbox, which seems to be a
minimal softswitch for embedded platforms….
http://developer.berlios.de/projects/dtmfbox/
*(from redmine: issue id 161, created on 2009-09-11, closed on 2009-10-02)*
* Changesets:
* Revision 2a02630ca1cf469862fc2ccfd7ffe0f2e3253fca on 2009-09-12T16:27:34Z:
```
testing/pjproject: upgrade to 1.4. add pjsua app
fixes #161
```
Alpine 1.9
Natanael Copa
Natanael Copa
https://gitlab.alpinelinux.org/alpine/aports/-/issues/158
rubygems wants ruby.h files (?!)
2019-07-12T14:23:29Z
Nathan Angelacos
rubygems wants ruby.h files (?!)
when installing radiant on a 1.9.0rc1 box:
gem install radiant
Building native extensions. This could take a while…
ERROR: Error installing radiant:
ERROR: Failed to build gem native extension.
/usr/bin/ruby extconf.rb
mkmf.rb ...
when installing radiant on a 1.9.0rc1 box:
gem install radiant
Building native extensions. This could take a while…
ERROR: Error installing radiant:
ERROR: Failed to build gem native extension.
/usr/bin/ruby extconf.rb
mkmf.rb can’t find header files for ruby at /usr/lib/ruby/ruby.h
Gem files will remain installed in
/usr/lib/ruby/gems/1.8/gems/RedCloth-4.2.2 for inspection.
Results logged to
/usr/lib/ruby/gems/1.8/gems/RedCloth-4.2.2/ext/redcloth\_scan/gem\_make.out
*(from redmine: issue id 158, created on 2009-09-06, closed on 2009-10-02)*
Alpine 1.9
Natanael Copa
Natanael Copa
https://gitlab.alpinelinux.org/alpine/aports/-/issues/157
rubygems 1.3.5-r0 installs rubygems.rb in /usr/lib
2019-07-12T14:23:28Z
Nathan Angelacos
rubygems 1.3.5-r0 installs rubygems.rb in /usr/lib
The correct path should be /usr/lib/ruby/1.8
To duplicate
1. apk add ruby rubygems
2. gem
localhost:~\# gem
/usr/bin/gem:8:in \`require’: no such file to load — rubygems
(LoadError)
from /usr/bin/gem:8
3. mv /usr/lib/rubygems...
The correct path should be /usr/lib/ruby/1.8
To duplicate
1. apk add ruby rubygems
2. gem
localhost:~\# gem
/usr/bin/gem:8:in \`require’: no such file to load — rubygems
(LoadError)
from /usr/bin/gem:8
3. mv /usr/lib/rubygems\* /usr/lib/ruby/1.8
4. gem
(works as expected)
*(from redmine: issue id 157, created on 2009-09-06, closed on 2009-10-02)*
* Changesets:
* Revision 7c2b7d6a9ed3e2775a04c7eae1254c9b7375645f on 2009-09-07T13:30:19Z:
```
main/rubygems: install rubygems.rb in correct location
fixes #157
```
Alpine 1.9
Natanael Copa
Natanael Copa
https://gitlab.alpinelinux.org/alpine/aports/-/issues/156
php session module unusable
2022-07-25T21:32:26Z
Nathan Angelacos
php session module unusable
When upgrading wiki.alpinlinux.org
alpinelinux:/etc/php/conf.d\# php-cgi -v
php-cgi: symbol ‘php\_url\_scanner\_adapt\_single\_url’: can’t resolve
symbol in lib ‘/usr/lib/php/20090626/session.so’.
PHP Warning: PHP Startup: Unable to ...
When upgrading wiki.alpinlinux.org
alpinelinux:/etc/php/conf.d\# php-cgi -v
php-cgi: symbol ‘php\_url\_scanner\_adapt\_single\_url’: can’t resolve
symbol in lib ‘/usr/lib/php/20090626/session.so’.
PHP Warning: PHP Startup: Unable to load dynamic library
‘/usr/lib/php/20090626/session.so’ - (null) in Unknown on line 0
PHP 5.3.0 (cgi-fcgi) (built: Sep 1 2009 08:39:44)
Copyright © 1997-2009 The PHP Group
Zend Engine v2.3.0, Copyright © 1998-2009 Zend Technologies
To duplicate:
on a fresh system:
1. apk add php php-session
2. edit /etc/php/php.ini and add the following lines
extension\_dir=“/usr/lib/php/20090626”
enable\_dl = on
extension = session.so
3. php-cgi -v
*(from redmine: issue id 156, created on 2009-09-06, closed on 2009-10-02)*
* Changesets:
* Revision 780c9ac71d85d5b5e7654cd8b5622d47195a7e4e on 2009-09-07T14:11:02Z:
```
main/php: clean up the php 5.3 upgrade
* remove php-session extension (its compiled in by default)
fixes #156
* added various php extensions
* added the suhosinver php hardening patch
* renamed php-postgresql to php-pgsql
```
Alpine 1.9
Natanael Copa
Natanael Copa
https://gitlab.alpinelinux.org/alpine/aports/-/issues/155
php apc module compiled for wrong php API
2019-07-12T14:23:27Z
Nathan Angelacos
php apc module compiled for wrong php API
*(from redmine: issue id 155, created on 2009-09-06, closed on 2009-10-02)*
* Changesets:
* Revision 935f81299d4ca3a7fa2a6bd01733ebedb99c4c15 on 2009-09-07T07:18:02Z:
```
main/php-apc: rebuild for php-5.3
fixes #155
```
*(from redmine: issue id 155, created on 2009-09-06, closed on 2009-10-02)*
* Changesets:
* Revision 935f81299d4ca3a7fa2a6bd01733ebedb99c4c15 on 2009-09-07T07:18:02Z:
```
main/php-apc: rebuild for php-5.3
fixes #155
```
Alpine 1.9
https://gitlab.alpinelinux.org/alpine/aports/-/issues/148
mdadm-raid does not start before lvm
2019-07-12T14:23:24Z
aa latchm
mdadm-raid does not start before lvm
Using alpine 1.9.0\_beta4, I set up LVM on a RAID array created with
mdadm (/dev/md0) according to the document
http://wiki.alpinelinux.org/w/index.php?title=Setting\_up\_Logical\_Volumes\_with\_LVM.
I replaced every \`rc\_add\` command ...
Using alpine 1.9.0\_beta4, I set up LVM on a RAID array created with
mdadm (/dev/md0) according to the document
http://wiki.alpinelinux.org/w/index.php?title=Setting\_up\_Logical\_Volumes\_with\_LVM.
I replaced every \`rc\_add\` command with \`rc-update SERVICE default\`.
All the services were sequenced correctly except for mdadm-raid. As a
result, the lvm partitions were unavailable after rebooting. Here are
the services as installed:
~# rc-status -a
* Caching service dependencies... [ok]
Runlevel: default
lvm [ started ]
localmount [ started ]
chronyd [ started ]
sshd [ started ]
cron [ started ]
crpd [ started ]
mdadm-raid [ started ]
swap [ started ]
Runlevel: boot
modules [ started ]
hwclock [ started ]
hostname [ started ]
sysctl [ started ]
bootmisc [ started ]
syslog [ started ]
networking [ started ]
I was able to work around this problem by creating /etc/conf.d/lvm as
follows:
~# cat /etc/conf.d/lvm
rc_need="mdadm-raid"
This results in the correct sequence for \`mdadm-raid\`:
~# rc-status default
Runlevel: default
mdadm-raid [ started ]
lvm [ started ]
localmount [ started ]
chronyd [ started ]
sshd [ started ]
cron [ started ]
crpd [ started ]
swap [ started ]
Perhaps /etc/init.d/mdadm-raid should be modified as follows:
--- mdadm-raid-orig Fri Aug 28 14:59:38 2009
+++ /etc/init.d/mdadm-raid Fri Aug 28 14:59:24 2009
@@ -2,6 +2,10 @@
# script to start raid devices described in /etc/mdadm.conf.
+depend() {
+ before lvm
+}
+
start() {
[ -f /proc/mdstat ] || modprobe -k md > /dev/null 2>&1
ebegin "Starting RAID devices"
*(from redmine: issue id 148, created on 2009-08-28, closed on 2009-10-09)*
* Changesets:
* Revision 386db07f3ed3f3e7dec969389f22472d44d7946c on 2009-08-31T11:22:07Z:
```
main/lvm2: init.d dependency fixes
make sure we start after fsck and after hwdrivers and modules.
provide default config that starts lvm after mdadm-raid.
fixes #148
```
Alpine 1.9
Timo Teräs
Timo Teräs
https://gitlab.alpinelinux.org/alpine/aports/-/issues/142
Ask for the webconf root password
2019-07-12T14:23:21Z
iilluzion _
Ask for the webconf root password
Currently after setup-webconf run you need to access acf web site to
setup root password during first time log-on. Here is a security issue
if somebody else will access your site without authorization first. I
suggest to ask for root pas...
Currently after setup-webconf run you need to access acf web site to
setup root password during first time log-on. Here is a security issue
if somebody else will access your site without authorization first. I
suggest to ask for root password ans setup it in setup-webconf script.
*(from redmine: issue id 142, created on 2009-08-19, closed on 2009-08-20)*
Alpine 1.9
Natanael Copa
Natanael Copa
https://gitlab.alpinelinux.org/alpine/aports/-/issues/137
apk does not honor http_proxy env var
2019-07-12T14:23:20Z
Leonardo Arena
apk does not honor http_proxy env var
Error while updating a package:
/home/leo \# apk add -u apk-tools
WARNING: Failed to open index for
http://alpine.nethq.org/alpine/v1.9/packages/main
Expected behaviour:
Use proxy to download index and packages
I think the same wo...
Error while updating a package:
/home/leo \# apk add -u apk-tools
WARNING: Failed to open index for
http://alpine.nethq.org/alpine/v1.9/packages/main
Expected behaviour:
Use proxy to download index and packages
I think the same would apply for ftp\_proxy. I haven’t tested it though.
*(from redmine: issue id 137, created on 2009-08-17, closed on 2009-08-18)*
Alpine 1.9
Natanael Copa
Natanael Copa
https://gitlab.alpinelinux.org/alpine/aports/-/issues/131
upgrade to postgres 8.4
2019-07-12T14:23:18Z
Natanael Copa
upgrade to postgres 8.4
Needs pre-upgrade script telling what needs to be done to backup the db,
upgrade and restoer the db.
*(from redmine: issue id 131, created on 2009-08-12, closed on 2009-08-13)*
Needs pre-upgrade script telling what needs to be done to backup the db,
upgrade and restoer the db.
*(from redmine: issue id 131, created on 2009-08-12, closed on 2009-08-13)*
Alpine 1.9
Natanael Copa
Natanael Copa
https://gitlab.alpinelinux.org/alpine/aports/-/issues/123
dansguardian: wrong permissions on /var/log/dansguardian
2019-07-12T14:23:16Z
Stephen Mun
dansguardian: wrong permissions on /var/log/dansguardian
Wrong permissions on directory for logfiles.
Create post-install script to solve this.
*(from redmine: issue id 123, created on 2009-08-09, closed on 2009-08-19)*
* Changesets:
* Revision fdd0312a868bdb5256940eb0a028a439211dc10d on...
Wrong permissions on directory for logfiles.
Create post-install script to solve this.
*(from redmine: issue id 123, created on 2009-08-09, closed on 2009-08-19)*
* Changesets:
* Revision fdd0312a868bdb5256940eb0a028a439211dc10d on 2009-08-10T06:15:50Z:
```
main/dansguardian: set permissions on /var/log/dansguardian
fixes #123
```
Alpine 1.9
Natanael Copa
Natanael Copa
https://gitlab.alpinelinux.org/alpine/aports/-/issues/122
SA_SIGINFO signal handling is broke in 1.9.0-beta2
2019-07-12T14:23:15Z
Timo Teräs
SA_SIGINFO signal handling is broke in 1.9.0-beta2
The kernel is unable to send signals with SA\_SIGINFO. This effectively
breaks all system with padlock, as this is used in openssl padlock
sha1/sha256 acceleration code.
See also:
http://grsecurity.net/pipermail/grsecurity/2009-August...
The kernel is unable to send signals with SA\_SIGINFO. This effectively
breaks all system with padlock, as this is used in openssl padlock
sha1/sha256 acceleration code.
See also:
http://grsecurity.net/pipermail/grsecurity/2009-August/000968.html
http://forums.grsecurity.net/viewtopic.php?f=3&t=2173
*(from redmine: issue id 122, created on 2009-08-08, closed on 2009-08-09)*
Alpine 1.9
Natanael Copa
Natanael Copa
https://gitlab.alpinelinux.org/alpine/aports/-/issues/121
sysklogd is missing, starts late
2019-07-12T14:23:15Z
Timo Teräs
sysklogd is missing, starts late
sysklogd package is missing from 1.9.0\_beta2 iso, even though it’s in
main aports.
also, it seems that the init.d dependencies could be fine tuned as it
starts pretty late in the startup sequence. i had it in ‘boot’ rc
category and it ...
sysklogd package is missing from 1.9.0\_beta2 iso, even though it’s in
main aports.
also, it seems that the init.d dependencies could be fine tuned as it
starts pretty late in the startup sequence. i had it in ‘boot’ rc
category and it started after a lot of other components.
*(from redmine: issue id 121, created on 2009-08-08, closed on 2009-08-19)*
* Changesets:
* Revision 6ed51d98e5a2bb27277cbefb185e62fe657ee16b on 2009-08-09T14:22:48Z:
```
main/sysklogd,busybox-initscripts: start system logger before network
fixes #121
```
Alpine 1.9
Natanael Copa
Natanael Copa
https://gitlab.alpinelinux.org/alpine/aports/-/issues/118
Cannot join samba via web interface
2019-07-12T14:23:12Z
algitbot
Cannot join samba via web interface
From issue \#117, reported by anonymous.
In the in the web page the join is not working at all. Message in
Samba/Join Domain/ Unable to find a suitable server for the domain
XXXXXXXXXXXXXXX.
*(from redmine: issue id 118, created on 20...
From issue \#117, reported by anonymous.
In the in the web page the join is not working at all. Message in
Samba/Join Domain/ Unable to find a suitable server for the domain
XXXXXXXXXXXXXXX.
*(from redmine: issue id 118, created on 2009-08-07, closed on 2009-12-23)*
Alpine 1.9
Ted Trask
Ted Trask
https://gitlab.alpinelinux.org/alpine/aports/-/issues/114
acf-apk-tools not working
2019-07-12T14:23:09Z
Christoffer Leitet
acf-apk-tools not working
I have a hd installed Alpine, and have updated it on the cosole at some
occations. When I tried to use the web interface to install a package
today, I got the following error when clicking System->Packages:
Alpine Configuration Frame...
I have a hd installed Alpine, and have updated it on the cosole at some
occations. When I tried to use the web interface to install a package
today, I got the following error when clicking System->Packages:
Alpine Configuration FrameworkApplication error occuredShow Detail
/usr/share/acf/app//apk-tools/apk-model.lua:112: attempt to compare
string with nil stack traceback:
/usr/share/acf/app//apk-tools/apk-model.lua:112: in function
‘upgrade\_available’ /usr/share/acf/app//apk-tools/apk-model.lua:142: in
function </usr/share/acf/app//apk-tools/apk-model.lua:128> (tail call):
? /usr/share/acf/app/acf\_www-controller.lua:436: in function
</usr/share/acf/app/acf_www-controller.lua:357> \[C\]: in function
‘xpcall’ /usr/share/acf/app/acf\_www-controller.lua:357: in function
‘dispatch’ \[string “acf”\]:18: in main chunk
*(from redmine: issue id 114, created on 2009-08-04, closed on 2009-12-23)*
Alpine 1.9
Ted Trask
Ted Trask
https://gitlab.alpinelinux.org/alpine/aports/-/issues/106
dansguardian-2.10.0.3-r3 does not start with blacklist loaded
2019-07-12T14:23:05Z
Leonardo Arena
dansguardian-2.10.0.3-r3 does not start with blacklist loaded
After having loaded a blacklist, and enabled it in
/etc/dansguardian/lists/bannedsitelist, running
“/etc/init.d/dansguardian start”, it never returns the prompt and squid
is unable to forward requests. Stracing it does not reveal anythin...
After having loaded a blacklist, and enabled it in
/etc/dansguardian/lists/bannedsitelist, running
“/etc/init.d/dansguardian start”, it never returns the prompt and squid
is unable to forward requests. Stracing it does not reveal anything
suspect to me.
*(from redmine: issue id 106, created on 2009-07-30, closed on 2010-01-01)*
Alpine 1.9
Natanael Copa
Natanael Copa
https://gitlab.alpinelinux.org/alpine/aports/-/issues/98
sysklogd not working
2019-07-12T14:23:01Z
Timo Teräs
sysklogd not working
default /etc/syslog.conf is missing.
and klogd seems to get sigsegv on startup for unknown reason.
*(from redmine: issue id 98, created on 2009-07-29, closed on 2009-08-08)*
* Changesets:
* Revision c47e236bc441bc6e479a211e7f93402...
default /etc/syslog.conf is missing.
and klogd seems to get sigsegv on startup for unknown reason.
*(from redmine: issue id 98, created on 2009-07-29, closed on 2009-08-08)*
* Changesets:
* Revision c47e236bc441bc6e479a211e7f93402627ab1351 by Timo Teräs on 2009-08-04T07:05:16Z:
```
main/sysklogd: fix the package to be usable (fixes #98)
fix a klogd crash if module symbols cannot be loaded. and add
a default configuration file (based on ubuntu one).
```
Alpine 1.9
Timo Teräs
Timo Teräs