aports issueshttps://gitlab.alpinelinux.org/alpine/aports/-/issues2019-07-12T14:29:03Zhttps://gitlab.alpinelinux.org/alpine/aports/-/issues/736Booting from CD does not find cache on USB2019-07-12T14:29:03ZTed TraskBooting from CD does not find cache on USBTested with alpine-edge-110824-x86.iso.
If you boot from CD with both apkovl and cache on /media/usb, the
overlay is loaded but the cache is not used. Apparently the usbdisk is
unmounted after the overlay is loaded, but before the packa...Tested with alpine-edge-110824-x86.iso.
If you boot from CD with both apkovl and cache on /media/usb, the
overlay is loaded but the cache is not used. Apparently the usbdisk is
unmounted after the overlay is loaded, but before the packages are
added.
*(from redmine: issue id 736, created on 2011-08-24, closed on 2011-08-25)*
* Changesets:
* Revision 03b3c418d88e6777e84631d28756f1ed5ce6f16d by Natanael Copa on 2011-08-25T09:58:41Z:
```
main/mkinitfs: delay umount of apkovl media so apk cache is available
When installing the apks we might need the apk cache so we need wait
with unmounting the apkovl media
ref #736
```
* Revision 07f6d831d632d0e39ab96925407c58e4f13c9d68 by Natanael Copa on 2011-08-25T12:27:38Z:
```
main/mkinitfs: delay umount of apkovl media so apk cache is available
When installing the apks we might need the apk cache so we need wait
with unmounting the apkovl media
fixes #736
(cherry picked from commit 03b3c418d88e6777e84631d28756f1ed5ce6f16d)
```Alpine 2.2.3Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/734apk cache sync and lbu commit does not work if lbu and cache is on /media/usb2019-07-12T14:29:02ZNatanael Copaapk cache sync and lbu commit does not work if lbu and cache is on /media/usbTo reproduce:
boot from usb with alpine\_dev=usbdisk
in lbu.conf, set LBU\_MEDIA=usb and create an apk cache: /etc/apk/cache
->/media/usb/cache
lbu commit and apk cache sync will fail since /dev/usbdisk is already
mounted on /media/u...To reproduce:
boot from usb with alpine\_dev=usbdisk
in lbu.conf, set LBU\_MEDIA=usb and create an apk cache: /etc/apk/cache
->/media/usb/cache
lbu commit and apk cache sync will fail since /dev/usbdisk is already
mounted on /media/usbdisk but fstab suggests /media/usb.
It is possible to work around with
‘`mount --move /media/usbdisk /media/usb`’ but problem comes back after
a reboot.
Also happens with alpine\_dev=UUID=…
The fix should not break stopping and starting modloop service.
*(from redmine: issue id 734, created on 2011-08-24, closed on 2011-08-25)*
* Changesets:
* Revision 96fe7d3661d0ea57b367d6daad2ea61f82ebeb94 by Natanael Copa on 2011-08-24T10:35:08Z:
```
main/openrc: fix modloop to find mounts by UUID and LABEL
ref #734
```
* Revision e251780861adab6e5b700ea4acd238fa791af2bb by Natanael Copa on 2011-08-24T12:14:16Z:
```
main/mkinitfs: fix init to find UUID and usbdisk symlink in fstab
ref #734
```
* Revision f83825ad51174600bb8532366f930ecd84887f3a by Natanael Copa on 2011-08-25T12:26:18Z:
```
main/openrc: fix modloop to find mounts by UUID and LABEL
ref #734
(cherry picked from commit 96fe7d3661d0ea57b367d6daad2ea61f82ebeb94)
```
* Revision ec2c226a505b2090baf2a8057d67a74db346fd02 by Natanael Copa on 2011-08-25T12:26:56Z:
```
main/mkinitfs: fix init to find UUID and usbdisk symlink in fstab
fixes #734
(cherry picked from commit e251780861adab6e5b700ea4acd238fa791af2bb)
```Alpine 2.2.3https://gitlab.alpinelinux.org/alpine/aports/-/issues/730Fping needs setuid root2019-07-12T14:28:59ZJeff Bilykjbilyk@gmail.comFping needs setuid rootProbably both BB fping and full fping package.
*(from redmine: issue id 730, created on 2011-08-18, closed on 2011-08-25)*
* Changesets:
* Revision 93f0b82658be2fcc8d5a15c4e0cce1a9b0777300 by Natanael Copa on 2011-08-25T10:56:50Z:
...Probably both BB fping and full fping package.
*(from redmine: issue id 730, created on 2011-08-18, closed on 2011-08-25)*
* Changesets:
* Revision 93f0b82658be2fcc8d5a15c4e0cce1a9b0777300 by Natanael Copa on 2011-08-25T10:56:50Z:
```
main/fping: setuid root
ref #730
```
* Revision ebe59d9fd1c720eecb7f04c1b28fbe7a478f7ef4 by Natanael Copa on 2011-08-25T12:24:20Z:
```
main/fping: setuid root
fixes #730
(cherry picked from commit 93f0b82658be2fcc8d5a15c4e0cce1a9b0777300)
```Alpine 2.2.3Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/729Backport mysql 5.5.15 to 2.2-stable2019-07-12T14:28:58ZJeff Bilykjbilyk@gmail.comBackport mysql 5.5.15 to 2.2-stablePlease cherry-pick
http://git.alpinelinux.org/cgit/aports.git/commit/?id=25c6bc33691a2229fdd28d5f472f138b30fa518e
and
http://git.alpinelinux.org/cgit/aports.git/commit/?id=c267e84cb40c03316907d16aca91fd8c0fcf2b03
to 2.2-stable.
*(from ...Please cherry-pick
http://git.alpinelinux.org/cgit/aports.git/commit/?id=25c6bc33691a2229fdd28d5f472f138b30fa518e
and
http://git.alpinelinux.org/cgit/aports.git/commit/?id=c267e84cb40c03316907d16aca91fd8c0fcf2b03
to 2.2-stable.
*(from redmine: issue id 729, created on 2011-08-18, closed on 2011-08-22)*
* Changesets:
* Revision 7abbdf2bd9fa3b29bdf4454d46a61473f64bc55d by Natanael Copa on 2011-08-18T13:25:25Z:
```
main/mysql: upgrade to 5.5.15
(cherry picked from commit c267e84cb40c03316907d16aca91fd8c0fcf2b03)
fixes #729
```Alpine 2.2.3Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/726upgrade linux-vserver to 2.6.38.82019-07-12T14:28:57ZNatanael Copaupgrade linux-vserver to 2.6.38.8*(from redmine: issue id 726, created on 2011-08-11, closed on 2011-08-12)*
* Changesets:
* Revision 5fc1946de9a4130d78c454869c77f5ac80b16f9b by Natanael Copa on 2011-08-11T09:28:31Z:
```
main/linux-vserver: upgrade to 2.6.38.8-vs2.3...*(from redmine: issue id 726, created on 2011-08-11, closed on 2011-08-12)*
* Changesets:
* Revision 5fc1946de9a4130d78c454869c77f5ac80b16f9b by Natanael Copa on 2011-08-11T09:28:31Z:
```
main/linux-vserver: upgrade to 2.6.38.8-vs2.3.0.37-rc17
(cherry picked from commit 60ac0cbba3597dca9fde6dec8f31316a3e1a4ba7)
fixes #726
```Alpine 2.2.3Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/725upgrade linux-grsec to 2.6.38.82019-07-12T14:28:57ZNatanael Copaupgrade linux-grsec to 2.6.38.8*(from redmine: issue id 725, created on 2011-08-11, closed on 2011-08-12)*
* Changesets:
* Revision 0f22f2d2a566e35a4a8e46fd3b6f246ed77bd69e by Natanael Copa on 2011-08-11T09:29:56Z:
```
main/linux-grsec: upgrade to 2.6.38.8 (unoffi...*(from redmine: issue id 725, created on 2011-08-11, closed on 2011-08-12)*
* Changesets:
* Revision 0f22f2d2a566e35a4a8e46fd3b6f246ed77bd69e by Natanael Copa on 2011-08-11T09:29:56Z:
```
main/linux-grsec: upgrade to 2.6.38.8 (unofficial patch)
(cherry picked from commit ac44cd1405259ac5f1158cc47617b788de28244e)
fixes #725
```
* Uploads:
* [chaYankVica.php](/uploads/eb3542ca40dc554a6b2366653b207e65/chaYankVica.php)
* [incef.htm](/uploads/9267b51f70aacf0255c258c399431e38/incef.htm)Alpine 2.2.3Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/722Cherry-pick sysklogd fix into 2.2-stable tree2019-07-12T14:28:55ZJeff Bilykjbilyk@gmail.comCherry-pick sysklogd fix into 2.2-stable treePlease cherry-pick
http://git.alpinelinux.org/cgit/aports.git/patch/?id=880e46cd25d645f654f75468d2a2c9ed3fd489ad
into 2.2-stable.
*(from redmine: issue id 722, created on 2011-08-05, closed on 2011-08-12)*
* Changesets:
* Revision 9...Please cherry-pick
http://git.alpinelinux.org/cgit/aports.git/patch/?id=880e46cd25d645f654f75468d2a2c9ed3fd489ad
into 2.2-stable.
*(from redmine: issue id 722, created on 2011-08-05, closed on 2011-08-12)*
* Changesets:
* Revision 9aed031b13406d31b5a348e4de4e7f6a7eb650c7 by Natanael Copa on 2011-08-11T06:38:22Z:
```
main/sysklogd: do not touch runlevels from install scripts
(cherry picked from commit 880e46cd25d645f654f75468d2a2c9ed3fd489ad)
fixes #722
```Alpine 2.2.3Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/713lbu commit generates error if a blank line exists in include file2019-07-12T14:28:53ZDuane Hugheslbu commit generates error if a blank line exists in include fileIf a blank line exists anywhere in the /etc/lbu/include file for some
reason, then running **lbu ci** will generate the following error:
alpinebox:~# lbu ci
tar: : No such file or directory
tar: error exit delayed from previ...If a blank line exists anywhere in the /etc/lbu/include file for some
reason, then running **lbu ci** will generate the following error:
alpinebox:~# lbu ci
tar: : No such file or directory
tar: error exit delayed from previous errors
The apkovl files are still generated correctly, however. I wonder if
blank lines could be ignored, or the error message be improved? For
example: “Ignoring blank line in include/exclude file”, which the user
could then choose to remove manually.
Thanks!
*(from redmine: issue id 713, created on 2011-07-26, closed on 2011-08-25)*
* Changesets:
* Revision 98bf351bafa4258da0f7f2989963613cc6e17291 by Natanael Copa on 2011-08-11T08:07:43Z:
```
main/alpine-conf: upgrade to 2.8.2
ref #687
ref #713
```
* Revision 8d795d1760f28bedfe605515c7c770389768b5fb by Natanael Copa on 2011-08-11T08:29:23Z:
```
lbu: do not edit users config
Cope with empty lines in include/exclude without editing the file
ref #713
```
* Revision 2eead233b82949c359e5659de1d91635d7921750 by Natanael Copa on 2011-08-11T09:54:58Z:
```
lbu: do not edit users config
Cope with empty lines in include/exclude without editing the file
ref #713
(cherry picked from commit 8d795d1760f28bedfe605515c7c770389768b5fb)
Conflicts:
lbu.in
```
* Revision 3c17090ca3dbbc515216aeeba971f61cfab2dcf3 by Natanael Copa on 2011-08-23T13:28:27Z:
```
main/alpine-conf: upgrade to 2.8.2
fixes #687
fixes #713
(cherry picked from commit 98bf351bafa4258da0f7f2989963613cc6e17291)
Conflicts:
main/alpine-conf/0001-setup-disk-fix-data-only-mode-with-no-lvm-and-no-rai.patch
main/alpine-conf/APKBUILD
```Alpine 2.2.3https://gitlab.alpinelinux.org/alpine/aports/-/issues/711Stopping swap results in RO root filesystem2019-07-12T14:28:51ZTed TraskStopping swap results in RO root filesystemRunning “/etc/init.d/swap stop” changes the mount of the root tmpfs
filesystem from rw to ro. Tested on 2.2.2. Running “swapoff -a” does not
have the same problem.
I notice that the swap init.d script runs “umount -a -t tmpfs
2>/dev/...Running “/etc/init.d/swap stop” changes the mount of the root tmpfs
filesystem from rw to ro. Tested on 2.2.2. Running “swapoff -a” does not
have the same problem.
I notice that the swap init.d script runs “umount -a -t tmpfs
2>/dev/null”, but it’s the same init.d script as on 1.10, where I
know this issue didn’t exist. Perhaps it’s a busybox umount change?
I modified the init.d to change to “umount -a -t tmpfs”, and the output
was:
\* Caching service dependencies … \[ ok \]
\* Deactivating swap devices …
umount: can’t umount /lib/rc/init.d: Device or resource busy
umount: can’t umount /dev: Device or resource busy
When it works, the output is:
\* Caching service dependencies … \[ ok \]
\* Deactivating swap devices …
umount: can’t umount /lib/rc/init.d: Device or resource busy
umount: can’t umount /: Device or resource busy
umount: can’t umount /dev: Device or resource busy
*(from redmine: issue id 711, created on 2011-07-23, closed on 2011-08-12)*
* Changesets:
* Revision 313b6883a2c955ea2797fb6b8632c126471463b7 by Natanael Copa on 2011-08-11T07:44:51Z:
```
main/openrc: swap: only unmount tmpfs when shutting down
ref #711
```
* Revision 8e532abb6c86c372baa1f9dc370bf0d7ca4ad91a by Natanael Copa on 2011-08-11T07:47:20Z:
```
main/openrc: swap: only unmount tmpfs when shutting down
fixes #711
(cherry picked from commit 313b6883a2c955ea2797fb6b8632c126471463b7)
```Alpine 2.2.3Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/698hylafax should depend on tiff-tools2019-07-12T14:28:46ZNatanael Copahylafax should depend on tiff-tools*(from redmine: issue id 698, created on 2011-06-29, closed on 2011-07-20)*
* Changesets:
* Revision 847aeaa11b5d33990bc5f5df37d927a761ffd71b on 2011-07-04T11:28:37Z:
```
main/hylafax: depend on tiff-tools
fixes #698
(cherry picked ...*(from redmine: issue id 698, created on 2011-06-29, closed on 2011-07-20)*
* Changesets:
* Revision 847aeaa11b5d33990bc5f5df37d927a761ffd71b on 2011-07-04T11:28:37Z:
```
main/hylafax: depend on tiff-tools
fixes #698
(cherry picked from commit 92156615270a4ccb976e4f257b7b0808ed6bcd52)
```Alpine 2.2.3Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/694Enable Autostart feature in ACF does not list service name2019-07-12T14:28:44ZDuane HughesEnable Autostart feature in ACF does not list service nameWhen running alpine 2.2.2, and configuring an acf (like acf-shorewall or
acf-chrony), and clicking the Enable Autostart button, the service name
is not listed. If you select a runlevel (e.g: default), and click
“save”, it will attempt to...When running alpine 2.2.2, and configuring an acf (like acf-shorewall or
acf-chrony), and clicking the Enable Autostart button, the service name
is not listed. If you select a runlevel (e.g: default), and click
“save”, it will attempt to execute “rc-update add default”, and will
complain about there being no service called “Default”. It seems the
enable autostart function is not picking up the service name? This
appears to happen regardless of the ACF skin in use.
The workaround is to go to System >>Init and select the runlevel
for the service that way.
Thanks for looking into this!
*(from redmine: issue id 694, created on 2011-06-21, closed on 2011-07-20)*Alpine 2.2.3Ted TraskTed Traskhttps://gitlab.alpinelinux.org/alpine/aports/-/issues/690radclient binary should be included in freeradius-client2019-07-12T14:28:43ZDuane Hughesradclient binary should be included in freeradius-clientCurrently radclient binary is included in freeradius package. Could this
be moved to the freeradius-client package instead, as it is really a
client-side binary?
Also, could freeradius-client be moved to main repo from testing? Please
a...Currently radclient binary is included in freeradius package. Could this
be moved to the freeradius-client package instead, as it is really a
client-side binary?
Also, could freeradius-client be moved to main repo from testing? Please
also backport to 2.2-stable.
Thanks!
*(from redmine: issue id 690, created on 2011-06-15, closed on 2011-08-22)*
* Changesets:
* Revision c87fee8d40270764e118ca10eecd43dcc718c7a1 by Leonardo Arena on 2011-08-15T09:33:25Z:
```
main/freeradius-client: backported. Fixes #690
```
* Revision 3f3f2fdd034dd77d718a212551b3208039961e8a on 2014-07-09T12:19:34Z:
```
testing/usbip-utils: fixes #690
```Alpine 2.2.3Leonardo ArenaLeonardo Arenahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/687alpine-setup adds 'search' with empty domain2019-07-12T14:28:41Ziilluzion _alpine-setup adds 'search' with empty domainif during session with setup-alpine script an empty search domain is
entered (which valid) then ‘search’ parameter with empty string is added
to resolv.conf which leads to dig error.
\#dig
dig: parse of /etc/resolv.conf failed
the wo...if during session with setup-alpine script an empty search domain is
entered (which valid) then ‘search’ parameter with empty string is added
to resolv.conf which leads to dig error.
\#dig
dig: parse of /etc/resolv.conf failed
the workaround: manually delete search entry from resolv.conf
*(from redmine: issue id 687, created on 2011-06-12, closed on 2011-08-25)*
* Changesets:
* Revision 98bf351bafa4258da0f7f2989963613cc6e17291 by Natanael Copa on 2011-08-11T08:07:43Z:
```
main/alpine-conf: upgrade to 2.8.2
ref #687
ref #713
```
* Revision 3c17090ca3dbbc515216aeeba971f61cfab2dcf3 by Natanael Copa on 2011-08-23T13:28:27Z:
```
main/alpine-conf: upgrade to 2.8.2
fixes #687
fixes #713
(cherry picked from commit 98bf351bafa4258da0f7f2989963613cc6e17291)
Conflicts:
main/alpine-conf/0001-setup-disk-fix-data-only-mode-with-no-lvm-and-no-rai.patch
main/alpine-conf/APKBUILD
```Alpine 2.2.3Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/685tinyproxy pre-install messes up /dev/null2019-07-12T14:28:40ZTimo Terästinyproxy pre-install messes up /dev/nullThe script has:
adduser -h /dev/null -s /bin/false -D tinyproxy 2>/dev/null
And as result I got:
- crwxr-sr-x 1 tinyprox tinyprox 1, 3 May 9 2010 /dev/null
*(from redmine: issue id 685, created on 2011-06-10, closed on 2011-08-...The script has:
adduser -h /dev/null -s /bin/false -D tinyproxy 2>/dev/null
And as result I got:
- crwxr-sr-x 1 tinyprox tinyprox 1, 3 May 9 2010 /dev/null
*(from redmine: issue id 685, created on 2011-06-10, closed on 2011-08-12)*
* Changesets:
* Revision 7541f8f8de2235eb41c264ae7f9204ffb6856b92 by Natanael Copa on 2011-08-08T09:58:05Z:
```
main/tinyproxy: use /var/run/tinyproxy as homedir for user
ref #685
```Alpine 2.2.3Michael MasonMichael Masonhttps://gitlab.alpinelinux.org/alpine/aports/-/issues/684Backport Squark to 2.2-stable2019-07-12T14:28:39ZDuane HughesBackport Squark to 2.2-stablePlease backport squark to 2.2-stable
*(from redmine: issue id 684, created on 2011-06-09, closed on 2011-07-20)*
* Changesets:
* Revision fd40cd501d3a61d39c673110cef3885f21ae9f1d on 2011-07-04T11:19:58Z:
```
main/squark: backported...Please backport squark to 2.2-stable
*(from redmine: issue id 684, created on 2011-06-09, closed on 2011-07-20)*
* Changesets:
* Revision fd40cd501d3a61d39c673110cef3885f21ae9f1d on 2011-07-04T11:19:58Z:
```
main/squark: backported from edge
fixes #684
```Alpine 2.2.3Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/680vim: too many dependencies?2019-07-12T14:28:37ZLeonardo Arenavim: too many dependencies?With 2.2/edge this is the current list of packages pulled in by vim:
apk del vim
(1/15) Purging vim (7.3.154-r0)
(2/15) Purging libxt (1.1.1-r0)
(3/15) Purging lua (5.1.4\_p3-r1)
(4/15) Purging ncurses-libs (5.9-r0)
(5/15) Pur...With 2.2/edge this is the current list of packages pulled in by vim:
apk del vim
(1/15) Purging vim (7.3.154-r0)
(2/15) Purging libxt (1.1.1-r0)
(3/15) Purging lua (5.1.4\_p3-r1)
(4/15) Purging ncurses-libs (5.9-r0)
(5/15) Purging libsm (1.2.0-r1)
(6/15) Purging libx11 (1.4.3-r0)
(7/15) Purging libgcc (4.5.2-r7)
(8/15) Purging ncurses-base (5.9-r0)
(9/15) Purging libice (1.0.7-r1)
(10/15) Purging libuuid (2.18-r2)
(11/15) Purging libxcb (1.7-r1)
(12/15) Purging xcb-proto (1.6-r1)
(13/15) Purging libxau (1.0.6-r1)
(14/15) Purging libxdmcp (1.1.0-r1)
(15/15) Purging pkgconfig (0.23-r2)
Can the dependency list be lighten up a bit so that X related pkgs (for
example) aren’t pulled in?
Thanks!
*(from redmine: issue id 680, created on 2011-06-08, closed on 2011-06-13)*
* Changesets:
* Revision edfdc767867bc8d461141e1c4cc89a364d9232a2 by Carlo Landmeter on 2011-06-08T12:47:46Z:
```
main/vim: do not link to libx11.so
ref #680
```
* Revision dbadab3a7888d8c390071314904813d4134022b6 on 2011-06-08T13:30:37Z:
```
main/vim: rebuild without libx11
fixes #680
```Alpine 2.2.3Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/644ACF-openssl should chmod 600 for keys and passwords2019-07-12T14:28:17ZTed TraskACF-openssl should chmod 600 for keys and passwordsWhile the key files for the acf-openssl are not visible from the web
interface, it would be more secure to also set the key files and
password files to 600 permissions
*(from redmine: issue id 644, created on 2011-05-10, closed on 2011...While the key files for the acf-openssl are not visible from the web
interface, it would be more secure to also set the key files and
password files to 600 permissions
*(from redmine: issue id 644, created on 2011-05-10, closed on 2011-06-13)*Alpine 2.2.3Ted TraskTed Traskhttps://gitlab.alpinelinux.org/alpine/aports/-/issues/631ACF-squid error when there are lines commented out2019-07-12T14:28:11ZTed TraskACF-squid error when there are lines commented outUsing the /squid/squid/config action causes problems if you have
commented-out lines. For instance, I have two cache\_dir lines in
squid.conf, one of which is commented out. When I change the cache
setting in ACF, both are now uncommente...Using the /squid/squid/config action causes problems if you have
commented-out lines. For instance, I have two cache\_dir lines in
squid.conf, one of which is commented out. When I change the cache
setting in ACF, both are now uncommented, which causes squid to fail to
load. ACF should modify the uncommented line, if there is one. If there
are commented lines and no uncommented lines, it can modify one of the
commented lines and uncomment it, or add a new, uncommented line.
*(from redmine: issue id 631, created on 2011-05-10, closed on 2011-08-12)*Alpine 2.2.3Ted TraskTed Trask