aports issueshttps://gitlab.alpinelinux.org/alpine/aports/-/issues2019-07-12T14:28:03Zhttps://gitlab.alpinelinux.org/alpine/aports/-/issues/620hwclock: unrecognized option '--systz'2019-07-12T14:28:03ZDuane Hugheshwclock: unrecognized option '--systz'When booting up a VIA Eden nano processor system on CF card with Alpine
2.2\_rc1 (also tested with 2.2\_rc3) from an i get the following error
on startup:
* Setting system clock using the hardware clock [UTC]
hwclock: unrecogniz...When booting up a VIA Eden nano processor system on CF card with Alpine
2.2\_rc1 (also tested with 2.2\_rc3) from an i get the following error
on startup:
* Setting system clock using the hardware clock [UTC]
hwclock: unrecognized option '--systz'
It then lists busybox usage syntax, and continues booting as normal.
Some fix required?
Thanks for investigating!
*(from redmine: issue id 620, created on 2011-05-03, closed on 2011-05-03)*Alpine 2.2.0Ariadne Conillariadne@ariadne.spaceAriadne Conillariadne@ariadne.spacehttps://gitlab.alpinelinux.org/alpine/aports/-/issues/613ugly progressbar during boot when not quiet2019-07-12T14:27:59Ziilluzion _ugly progressbar during boot when not quietIf ‘quiet’ directive is removed from syslinux.cfg then setting of system
root directory looks exactly as decribed here:
http://bugs.alpinelinux.org/issues/591
*(from redmine: issue id 613, created on 2011-04-28, closed on 2011-04-29)*
...If ‘quiet’ directive is removed from syslinux.cfg then setting of system
root directory looks exactly as decribed here:
http://bugs.alpinelinux.org/issues/591
*(from redmine: issue id 613, created on 2011-04-28, closed on 2011-04-29)*
* Changesets:
* Revision 89285d731d09a4f898f5781ba1a52df1a4e25294 on 2011-04-28T15:52:35Z:
```
main/mkinitfs: fix progressbar
fixes #613
```Alpine 2.2.0Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/612fsck should be aware of mdadm/lvm mounted file systems2019-07-12T14:27:58Ziilluzion _fsck should be aware of mdadm/lvm mounted file systemsBy default ‘fsck’ starts before MDADM/LVM, so it could not check file
system on it, but report errors. Perhaps ‘fsck’ should start strictly
after ‘localmount’ script, which should be aware of MDADM and LVM
partitions
*(from redmine: is...By default ‘fsck’ starts before MDADM/LVM, so it could not check file
system on it, but report errors. Perhaps ‘fsck’ should start strictly
after ‘localmount’ script, which should be aware of MDADM and LVM
partitions
*(from redmine: issue id 612, created on 2011-04-28, closed on 2011-05-03)*Alpine 2.2.0https://gitlab.alpinelinux.org/alpine/aports/-/issues/609roundcubemail-installer package2019-07-12T14:27:56Ziilluzion _roundcubemail-installer packageThis package should contain roundcubemail ‘installer’ directory and will
be useful during setup/upgrade process since has vital config and system
checks, which not easy to perform manually. Due security reasons after
setup/upgrade packag...This package should contain roundcubemail ‘installer’ directory and will
be useful during setup/upgrade process since has vital config and system
checks, which not easy to perform manually. Due security reasons after
setup/upgrade package could be removed from system.
Perhaps CHANGELOG INSTALL LICENSE README SQL UPGRADING and bin/update.sh
could be removed from main package.
But roundcubemail-installer may contain also SQL directory with
setup/upgrade scripts and bin/update.sh script as well.
*(from redmine: issue id 609, created on 2011-04-28, closed on 2011-04-30)*
* Changesets:
* Revision c7b4b21b7b4160c862e30f0705d2c44dcedffdd9 on 2011-04-28T14:19:56Z:
```
main/roundcubemail: create subpackage for installer
The installer is a security risk and should not be installed.
fixes #609
```Alpine 2.2.0https://gitlab.alpinelinux.org/alpine/aports/-/issues/608Dovecot 2.0.12 post-install script wrong ssl parameters2019-07-12T14:27:56Ziilluzion _Dovecot 2.0.12 post-install script wrong ssl parametersCertificate generation algorithm relays on old ssl configuration
parameters. Since dovecot 2.x SSL params are in for “ssl\_\* = <
\[file path\]”.
It is critical since system stops booting due to fatal error.
Temporary workaround i...Certificate generation algorithm relays on old ssl configuration
parameters. Since dovecot 2.x SSL params are in for “ssl\_\* = <
\[file path\]”.
It is critical since system stops booting due to fatal error.
Temporary workaround is to add legacy ssl\_\*\_file parameters to
/dec/dovecot.conf file. Dovecot will warns but works.
typo: echo “**Keeiping** existing $KEYFILE” in two places
*(from redmine: issue id 608, created on 2011-04-28, closed on 2011-05-02)*
* Relations:
* relates #667
* Changesets:
* Revision efa99500f7e82571d9ab461d982aa82003abb928 on 2011-04-28T13:03:22Z:
```
main/dovecot: fix post-install script to handle 2.0 config
fixes #608
```
* Revision 57e62aa2b47a5f62fbc48eaf22346b90b473a2f5 by Natanael Copa on 2011-08-17T12:10:30Z:
```
main/dovecot: fix post-install script to handle 2.0 config
fixes #608
(cherry picked from commit efa99500f7e82571d9ab461d982aa82003abb928)
```Alpine 2.2.0Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/606main/lighttpd: permissions of /var/log/lighttpd and /var/run/lighttpd needs f...2019-07-12T14:27:55ZNatanael Copamain/lighttpd: permissions of /var/log/lighttpd and /var/run/lighttpd needs follow the configYou can set the *server.username* and *server.groupname* to something
else than lighttpd and if that is done, the permissions of
/var/{log,run}/lighttpd will be wrong. This does not really matter for
disk installs since you can set those...You can set the *server.username* and *server.groupname* to something
else than lighttpd and if that is done, the permissions of
/var/{log,run}/lighttpd will be wrong. This does not really matter for
disk installs since you can set those once for all there but it is
broken for tmpfs installs. It does not help to add those dirs to lbu
include since apk will overwrite the permissions to the lighttp:lighttp
user group as found in apk package.
Possible solutions:
- init.d script parses config and sets permissions before starting
daemon
- the post-install parses the config and sets the permissions
*(from redmine: issue id 606, created on 2011-04-28, closed on 2011-05-03)*
* Changesets:
* Revision bf277d94c5aab5af8fbe8a4e175379e6f2682245 on 2011-05-03T06:54:53Z:
```
main/lighttpd: set /var/{run,log}/lighttpd permission on start
Needed when server.user and server.group is not set to default
value and we run from RAM.
fixes #606
```Alpine 2.2.0Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/605main/roundcubemail: paths for config, logs and possibly temp dirs are wrong2019-07-12T14:27:55ZNatanael Copamain/roundcubemail: paths for config, logs and possibly temp dirs are wrongSupposed to be:
- /etc/roundcube for config
- /var/log/roundcube for logs
- /tmp for temp
Atleast config dir is wrong in package.
The APKBUILD tries to make a sed fix for this (based on fedora specs
file), but seems like code ha...Supposed to be:
- /etc/roundcube for config
- /var/log/roundcube for logs
- /tmp for temp
Atleast config dir is wrong in package.
The APKBUILD tries to make a sed fix for this (based on fedora specs
file), but seems like code has changed so it no longer works.
*(from redmine: issue id 605, created on 2011-04-28, closed on 2011-05-02)*
* Changesets:
* Revision 2f909b882e04b62efc306564821d6e67406ea2b2 on 2011-04-28T15:08:07Z:
```
main/roundcubemail: fix config/temp/log dirs and depends
fixes #605
```Alpine 2.2.0Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/603Chrony fails to start when upgrading to Alpine 2.2_rc12019-07-12T14:27:53ZDuane HughesChrony fails to start when upgrading to Alpine 2.2_rc1The following occurs when upgrading chronyd on an alpine 2.x
installation to an alpine 2.2\_rc1 installation:
/etc/init.d/chronyd start
* chronyd: error loading /etc/init.d/../conf.d/chronyd
* ERROR: chronyd failed to star...The following occurs when upgrading chronyd on an alpine 2.x
installation to an alpine 2.2\_rc1 installation:
/etc/init.d/chronyd start
* chronyd: error loading /etc/init.d/../conf.d/chronyd
* ERROR: chronyd failed to start
Commenting out these lines in /etc/conf.d/chronyd allows the service to
start successfully:
#test -c /dev/rtc && {
# grep -q '^rtcfile' "${CFGFILE}" && ARGS="${ARGS} -s"
#}
#grep -q '^dumponexit$' "${CFGFILE}" && ARGS="${ARGS} -r"
Is there a better solution?
*(from redmine: issue id 603, created on 2011-04-27, closed on 2011-04-30)*
* Changesets:
* Revision 1f853d411dac71a35fa6932e147cbb7d6b5d1b92 by Duane Hughes on 2011-04-28T09:16:39Z:
```
main/chrony: updated with latest initd and confd from gentoo
fixes #603
```Alpine 2.2.0https://gitlab.alpinelinux.org/alpine/aports/-/issues/602posixtz (tzdata) returns nothing on x86_642019-07-12T14:27:53ZCarlo Landmeterposixtz (tzdata) returns nothing on x86_64The following will return nothing:
posixtz /usr/share/zoneinfo/CET
*(from redmine: issue id 602, created on 2011-04-27, closed on 2011-04-28)*The following will return nothing:
posixtz /usr/share/zoneinfo/CET
*(from redmine: issue id 602, created on 2011-04-27, closed on 2011-04-28)*Alpine 2.2.0Ariadne Conillariadne@ariadne.spaceAriadne Conillariadne@ariadne.spacehttps://gitlab.alpinelinux.org/alpine/aports/-/issues/592setup-disk says "Not a valid install mode" when no disk is selected2019-07-12T14:27:50ZNatanael Copasetup-disk says "Not a valid install mode" when no disk is selectedWhen you select ‘none’ in disk selection you get an error message and
script exits with error. Selecting ‘none’ is perfectly legal so no error
should be displayed and script should exit with success.
*(from redmine: issue id 592, creat...When you select ‘none’ in disk selection you get an error message and
script exits with error. Selecting ‘none’ is perfectly legal so no error
should be displayed and script should exit with success.
*(from redmine: issue id 592, created on 2011-04-27, closed on 2011-05-03)*
* Changesets:
* Revision ca32c5f76f5281b23fc93b8bc7ff6afdea5d23fc by Natanael Copa on 2011-04-27T13:29:07Z:
```
setup-disk: don't complain about invalid disk mode when disk is 'none'
and fix help to include LVM option
ref #592
```Alpine 2.2.0Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/591setup-vs-guest progressbar looks strange2022-01-30T04:00:35ZNatanael Copasetup-vs-guest progressbar looks strangeIt looks something like:
...
Enter template file (or empty for generate a new):
Generating template...-[
]- 0% -[ ...It looks something like:
...
Enter template file (or empty for generate a new):
Generating template...-[
]- 0% -[
]- 1% -[#
]- 3% -[##
]- 4% -[###
]- 5% -[#######
]- 12% -[#######
]- 12% -[########
]- 13% -[###################
]- 30% -[###################
]- 30% -[####################
]- 31% -[####################
]- 32% -[#####################
...etc
This comes from the apk-tools progressbar improvement. We need simply
add a newline in setup-vs-guest.
*(from redmine: issue id 591, created on 2011-04-27, closed on 2011-04-30)*Alpine 2.2.0Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/590/etc/init.d/dovecot extracts base_dir value incorectly2019-07-12T14:27:49Ziilluzion _/etc/init.d/dovecot extracts base_dir value incorectlyIt leaves parameter name ‘base\_dir =’ in the beggining. so instead of
just directory path there is value like this: ‘base\_dir =
/var/run/dovecot’. Consequently, script can not stop the services with
this error: start-stop-daemon: fopen...It leaves parameter name ‘base\_dir =’ in the beggining. so instead of
just directory path there is value like this: ‘base\_dir =
/var/run/dovecot’. Consequently, script can not stop the services with
this error: start-stop-daemon: fopen \`base\_dir =
/var/run/dovecot/master.pid’: No such file or directory
*(from redmine: issue id 590, created on 2011-04-26, closed on 2011-04-27)*
* Changesets:
* Revision abb5c6ef883ea901ff44656ebee7f0ac3f144013 on 2011-04-26T12:20:49Z:
```
main/dovecot: update init.d script
copied from gentoo
ref #590
```
* Revision ec158269e8a521e0b9cb407cbc2e93d26d346fc6 by Natanael Copa on 2011-08-17T12:10:17Z:
```
main/dovecot: update init.d script
copied from gentoo
ref #590
(cherry picked from commit abb5c6ef883ea901ff44656ebee7f0ac3f144013)
```Alpine 2.2.0Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/585postgresql-9.0.3-r0 fails to initialize database2019-07-12T14:27:47ZNathan Angelacospostgresql-9.0.3-r0 fails to initialize databaseFrom edge (17 April 2011)
su -c “strace /usr/bin/initdb —pgdata /var/lib/postgresql/9.0/data”
postgres
builds the template1 database, and then segfaults:
write(1, “ok\\n”, 3) = 3
write(1, “copying template1 to template0 .”…, 35) = 3...From edge (17 April 2011)
su -c “strace /usr/bin/initdb —pgdata /var/lib/postgresql/9.0/data”
postgres
builds the template1 database, and then segfaults:
write(1, “ok\\n”, 3) = 3
write(1, “copying template1 to template0 .”…, 35) = 35
pipe(\[3, 4\]) = 0
fcntl64(4, F\_GETFL) = 0x1 (flags O\_WRONLY)
ioctl(4, SNDCTL\_TMR\_TIMEBASE or SNDRV\_TIMER\_IOCTL\_NEXT\_DEVICE or
TCGETS, 0xbfea0f38) = –1 EINVAL (Invalid argument)
vfork() = 21287
close(3) = 0
write(4, “CREATE DATABASE template0;\\n”, 27) = 27
write(4, “UPDATE pg\_database SET \\tdatistem”…, 98) = 98
write(4, “UPDATE pg\_database SET datlastsy”…, 106) = 106
write(4, “REVOKE CREATE,TEMPORARY ON DATAB”…, 59) = 59
write(4, “REVOKE CREATE,TEMPORARY ON DATAB”…, 59) = 59
write(4, “VACUUM FULL pg\_database;\\n”, 25) = 25
close(4) = 0
waitpid(21287, Segmentation fault
\[{WIFEXITED(s) && WEXITSTATUS (s) == 139}\], 0) = 21287
—- {si\_signo=SIGCHLD, si\_code=CLD\_EXITED, si\_pid=21287,
si\_status=139, si\_utime=0, si\_stime=0} (Child exited) —-
write(2, “child process exited with exit c”…, 36child process exited
with exit code ) = 36
write(2, “139”, 3139) = 3
write(2, “\\n”, 1
) = 1
write(2, “initdb”, 6initdb) = 6
write(2, “: removing contents of data dire”…, 39: removing contents of
data directory ") = 39
dmesg reports:
postgres\[20103\]: segfault at fff0 ip b712bbbf sp bfcd3f3c error 6 in
libuClibc-0.9.32-rc3.so\[b7120000+4b000\]
*(from redmine: issue id 585, created on 2011-04-18, closed on 2011-04-27)*Alpine 2.2.0Timo TeräsTimo Teräshttps://gitlab.alpinelinux.org/alpine/aports/-/issues/584openrc 0.8.0 fails to boot on xen guest2019-07-12T14:27:47ZAriadne Conillariadne@ariadne.spaceopenrc 0.8.0 fails to boot on xen guestOpenRC fails to boot us up. See the following boot log:
Booting command-list
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz-2.6.38.2-grsec root=/dev/xvda1 modules=ext3 quiet
initrd /boot/initramf...OpenRC fails to boot us up. See the following boot log:
Booting command-list
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz-2.6.38.2-grsec root=/dev/xvda1 modules=ext3 quiet
initrd /boot/initramfs-2.6.38.2-grsec
close blk: backend=/local/domain/0/backend/vbd/32/51712
node=device/vbd/51712
close blk: backend=/local/domain/0/backend/vbd/32/51776
node=device/vbd/51776
close blk: backend=/local/domain/0/backend/vbd/32/51792
node=device/vbd/51792
\[ 0.184446\] i8042: No controller found
Alpine Init 2.3.3
OpenRC 0.8.0.155803c is starting up Linux 2.6.38.2-grsec (x86\_64)
\[XENU\]
\* You have cruft in /proc that should be deleted
\* Mounting /proc …mount: mounting proc on /proc failed: Device or
resource busy
\[ !! \]
\* Mounting xenfs … \[ ok \]
\* WARNING: rc\_sys not defined in rc.conf. Falling back to automatic
detection
\* Caching service dependencies … \[ ok \]
I do not think this is an openrc-specific issue for the record.
*(from redmine: issue id 584, created on 2011-04-16, closed on 2011-04-17)*Alpine 2.2.0https://gitlab.alpinelinux.org/alpine/aports/-/issues/583fail2ban missing init script2019-07-12T14:27:46ZJeff Hicksonfail2ban missing init scriptThe package fail2ban is missing it’s init script, one just needs to be
put in the package.
*(from redmine: issue id 583, created on 2011-04-15, closed on 2011-04-27)*
* Changesets:
* Revision 2db6c6cae02eeead53b9ad09da0087c928bc29de...The package fail2ban is missing it’s init script, one just needs to be
put in the package.
*(from redmine: issue id 583, created on 2011-04-15, closed on 2011-04-27)*
* Changesets:
* Revision 2db6c6cae02eeead53b9ad09da0087c928bc29de on 2011-04-20T16:44:53Z:
```
testing/fail2ban: add init.d script and logrotate
fixes #583
```Alpine 2.2.0Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/582php_mssql2019-07-12T14:27:45ZFrancesco Colistaphp_mssqlPlease add php\_mssql. Thanks
*(from redmine: issue id 582, created on 2011-04-15, closed on 2011-05-02)*Please add php\_mssql. Thanks
*(from redmine: issue id 582, created on 2011-04-15, closed on 2011-05-02)*Alpine 2.2.0Matt SmithMatt Smithhttps://gitlab.alpinelinux.org/alpine/aports/-/issues/581Kernel 2.6.38 breaks v4l-utils2019-07-12T14:27:45ZLeonardo ArenaKernel 2.6.38 breaks v4l-utilshttp://www.mail-archive.com/linux-media@vger.kernel.org/msg27519.html
Currently v4l-utils-0.8.2-r0 complains that it cannot find
linux/videodev.h. It looks like it has been removed from kernel
2.6.38.
V4l-utils developers are going to...http://www.mail-archive.com/linux-media@vger.kernel.org/msg27519.html
Currently v4l-utils-0.8.2-r0 complains that it cannot find
linux/videodev.h. It looks like it has been removed from kernel
2.6.38.
V4l-utils developers are going to remove support for legacy v4l1 stuff
as well. Version 0.8.3 should fix this.
*(from redmine: issue id 581, created on 2011-04-15, closed on 2011-04-27)*Alpine 2.2.0Natanael CopaNatanael Copa2011-04-22https://gitlab.alpinelinux.org/alpine/aports/-/issues/580Alpine Edge (110412): Make console ttys identify themselves2019-07-12T14:27:44ZMatt SmithAlpine Edge (110412): Make console ttys identify themselvesMake console ttys identify themselves.
i.e.:
This is localhost (tty1)
Alt-F2:
This is localhost (tty2)
*(from redmine: issue id 580, created on 2011-04-14, closed on 2011-04-27)*
* Changesets:
* Revision 986629878f5ab52cbaeb71...Make console ttys identify themselves.
i.e.:
This is localhost (tty1)
Alt-F2:
This is localhost (tty2)
*(from redmine: issue id 580, created on 2011-04-14, closed on 2011-04-27)*
* Changesets:
* Revision 986629878f5ab52cbaeb71ea79113fdb3e91ebed on 2011-04-20T15:03:00Z:
```
main/alpine-base: ship an /etc/issue file
with alpine release and tty
fixes #580
```
* Revision 7585763f3d3a6ac3f52b8fe4a526da45100ea7ea on 2011-04-20T15:03:00Z:
```
main/alpine-baselayout: do not ship the /etc/issue
ref #580
```Alpine 2.2.0https://gitlab.alpinelinux.org/alpine/aports/-/issues/578Alpine Edge (110412): WARNING: rc_sys not defined in rc.conf2019-07-12T14:27:43ZMatt SmithAlpine Edge (110412): WARNING: rc_sys not defined in rc.confWhen booting the Alpine Edge (110412) ISO, or a freshly-installed system
from the ISO, I get the following message on boot:
* WARNING: rc_sys not defined in rc.conf. Falling back to automatic detection
*(from redmine: issue id 57...When booting the Alpine Edge (110412) ISO, or a freshly-installed system
from the ISO, I get the following message on boot:
* WARNING: rc_sys not defined in rc.conf. Falling back to automatic detection
*(from redmine: issue id 578, created on 2011-04-14, closed on 2011-04-27)*
* Changesets:
* Revision da702bce05591e20f2d4ea840f854828b0ff74fe on 2011-04-27T17:31:15Z:
```
main/util-vserver: fix setup-vs-guest progressbar
fixes #578
```
* Revision b2ea6198bde082904f57fa9c6e6fb0650044af39 on 2011-04-27T17:52:53Z:
```
main/openrc: remove warning about rc_sys not defined in rc.conf
We don't need this warning really.
fixes #578
```Alpine 2.2.0Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/572create init.d script for lsyncd2019-07-12T14:27:41ZNatanael Copacreate init.d script for lsyncdneed init.d script for lsyncd to run as daemon
*(from redmine: issue id 572, created on 2011-04-07, closed on 2011-04-13)*
* Changesets:
* Revision 350a371f64e8e6ff21fb2a4bac2e53331b6495db by Carlo Landmeter on 2011-04-07T23:35:45Z:...need init.d script for lsyncd to run as daemon
*(from redmine: issue id 572, created on 2011-04-07, closed on 2011-04-13)*
* Changesets:
* Revision 350a371f64e8e6ff21fb2a4bac2e53331b6495db by Carlo Landmeter on 2011-04-07T23:35:45Z:
```
testing/lsyncd: added initd
ref #572
```Alpine 2.2.0Natanael CopaNatanael Copa