aports issueshttps://gitlab.alpinelinux.org/alpine/aports/-/issues2019-07-23T11:13:46Zhttps://gitlab.alpinelinux.org/alpine/aports/-/issues/10088Docker Package Upgrade to 18.09.22019-07-23T11:13:46ZAlec KellerDocker Package Upgrade to 18.09.2Docker released an update to fix a privilege escalation vulnerability
(CVE-2019-5736) in runC, the Open Container Initiative (OCI) runtime
specification used in Docker Engine and containerd. This vulnerability
makes it possible for a mal...Docker released an update to fix a privilege escalation vulnerability
(CVE-2019-5736) in runC, the Open Container Initiative (OCI) runtime
specification used in Docker Engine and containerd. This vulnerability
makes it possible for a malicious actor that has created a
specially-crafted container image to gain administrative privileges on
the host. Docker recommends immediately applying the update to avoid any
potential security threats. For Docker Engine-Community, this means
updating to 18.09.2
*(from redmine: issue id 10088, created on 2019-03-11, closed on 2019-05-03)*https://gitlab.alpinelinux.org/alpine/aports/-/issues/10074MUSL APK - malware detection2019-07-23T11:13:56ZRoman KMUSL APK - malware detectionHello,
I just start to use Alpine so I’m not sure in which category (and in
which way) I should report an issue, I would be pleased if someone
points me to right direction.
My issue is not so big, it’s mostly for your info.
Yesterday...Hello,
I just start to use Alpine so I’m not sure in which category (and in
which way) I should report an issue, I would be pleased if someone
points me to right direction.
My issue is not so big, it’s mostly for your info.
Yesterday I made an fresh install of Alpine Distributive on my Windows
machine with VBox.
There were no problem, I passed all steps with `setup-alpine`.
The script automatically detected host for repositories. That was
http://mirror.fit.cvut.cz/alpine/
When I login and made first recommended steps `#apk update` then
`#apk upgrade` I got an issue with Musl package, the host-machine’s
antivirus simply block downloading.
I was able to update the package only through another mirror by https.
I made some experiments with different mirrors - the same result, the
antivirus detected malware. Then I downloaded the libruary directly from
[official
site](http://git.musl-libc.org/cgit/musl/snapshot/musl-1.1.21.tar.gz) -
no issues, archive scan and exact `ld_musl_86_64.so.1` scan didn’t show
any alarms. So looks like there is something added by package creation
process and that is not appreciated by antivirus.
I think it would be better to double check - if there isn’t trouble.
Some details:
>VBox: 5.2.18
>Alpine-linux:
[alpine-standard-3.9.2-x86\_64](http://dl-cdn.alpinelinux.org/alpine/v3.9/releases/x86_64/alpine-standard-3.9.2-x86_64.iso)
>Host: Windows 10
>Host-antivirus: Avast Business Pro
>Antivirus message: (translate: “Connection to mirror.fit.cvut.cz
was declined due to the ELF:BitCoinMiner-HP\[Tr\] malware detection”)
![](Capture.PNG)
*(from redmine: issue id 10074, created on 2019-03-09, closed on 2019-06-03)*
* Uploads:
* ![Capture](/uploads/d1578c8cea89069ca12ed6107aee0ec0/Capture.PNG)https://gitlab.alpinelinux.org/alpine/aports/-/issues/9947apk installation errors since v3.9.0 upgrade2019-07-23T11:15:00Zalgitbotapk installation errors since v3.9.0 upgradeHi. We’re using Alpine for a Docker container to run unit tests via
Chromium. Yesterday with the 3.9.0 release our build broke with these
errors:
@
…
(10/100) Installing ttf-opensans (1.10-r0)
Executing ttf-opensans-1.10-r0.post-i...Hi. We’re using Alpine for a Docker container to run unit tests via
Chromium. Yesterday with the 3.9.0 release our build broke with these
errors:
@
…
(10/100) Installing ttf-opensans (1.10-r0)
Executing ttf-opensans-1.10-r0.post-install
Error relocating /lib/libuuid.so.1: getrandom: symbol not found@
…
(90/100) Installing gtk+3.0 (3.24.1-r0)
Executing gtk+3.0-3.24.1-r0.post-install
Error relocating /lib/libmount.so.1: getrandom: symbol not found
Error relocating /lib/libuuid.so.1: getrandom: symbol not found
Error relocating /lib/libblkid.so.1: getrandom: symbol not found
…
@
Here’s what our dockerfile is doing:
`RUN apk --no-cache update \
&& echo http://nl.alpinelinux.org/alpine/latest-stable/community >> /etc/apk/repositories \
&& echo http://nl.alpinelinux.org/alpine/latest-stable/main >> /etc/apk/repositories \
&& apk add --no-cache \
git \
chromium \
nss
...`
Downgrading to 3.8 resolves it, so we can do that for now, but I’m
hoping to figure out where the dependencies have gone wrong… Any
pointers for narrowing the problem down would be gratefully received,
thanks!
*(from redmine: issue id 9947, created on 2019-01-30, closed on 2019-05-04)*
* Uploads:
* ![Screen_Shot_2019-01-30_at_16.12.35](/uploads/2513c502ef74378c7ea198d3edafe662/Screen_Shot_2019-01-30_at_16.12.35.png) DockerFile
* ![Screen_Shot_2019-01-30_at_16.15.42](/uploads/82be0a317ce6577122aca133fe483fd5/Screen_Shot_2019-01-30_at_16.15.42.png) Errorhttps://gitlab.alpinelinux.org/alpine/aports/-/issues/9945RPi fails to boot if gpu_mem=162020-04-10T20:07:53ZalgitbotRPi fails to boot if gpu_mem=16for a headless server, the gpu is not really needed. But when setting
this to the minimum of 16 MB, the RPI (version 1 Model B) does not
boot.
It will flash the green led 4 times periodically.
When setting this to 32 MB, Alpine boots ...for a headless server, the gpu is not really needed. But when setting
this to the minimum of 16 MB, the RPI (version 1 Model B) does not
boot.
It will flash the green led 4 times periodically.
When setting this to 32 MB, Alpine boots without issues.
4 flashes means loader.bin or start.elf not launched
Are these files in the raspberry image supplied by Alpine Linux? If not,
feel free to close this issue.
*(from redmine: issue id 9945, created on 2019-01-29)*3.8.5Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/9827virt alpine kernel with no pl2303 module2020-01-18T00:12:52ZChris Schuvirt alpine kernel with no pl2303 moduleHi !
i have installed apline linux on an virtualbox and i use the virtual
alpine kernel !
but with this kernel i have not the Pl2303 serial usb module ! with the
vanilla kernel ist works out of the box !
Prolific PL2303 USB - Serial a...Hi !
i have installed apline linux on an virtualbox and i use the virtual
alpine kernel !
but with this kernel i have not the Pl2303 serial usb module ! with the
vanilla kernel ist works out of the box !
Prolific PL2303 USB - Serial adapter
/lib/modules/\`uname -r\`/kernel/drivers/usb/serial/pl2303.ko
How can i use the module and compile the kernel for the virt kernel
->i cannot understand the wiki ->the howto build costum kernel !
Thanks !
kind regards
*(from redmine: issue id 9827, created on 2019-01-04, closed on 2019-01-07)*https://gitlab.alpinelinux.org/alpine/aports/-/issues/9810Issues with sgdisk2020-04-10T19:52:33ZSteffen NurpmesoIssues with sgdisk*(from redmine: issue id 9810, created on 2018-12-28)**(from redmine: issue id 9810, created on 2018-12-28)*https://gitlab.alpinelinux.org/alpine/aports/-/issues/9807Cross compilation issue2019-07-23T11:16:46ZFrancois VignonCross compilation issueHello.
can you tell me errno.h you use to compile busybox, and more precisely,
the value of EAGAIN ?
many thanks in advance.
*(from redmine: issue id 9807, created on 2018-12-28, closed on 2019-04-25)*Hello.
can you tell me errno.h you use to compile busybox, and more precisely,
the value of EAGAIN ?
many thanks in advance.
*(from redmine: issue id 9807, created on 2018-12-28, closed on 2019-04-25)*https://gitlab.alpinelinux.org/alpine/aports/-/issues/9746License file of alpinelinux/abuild2019-07-23T11:17:37ZChingis SLicense file of alpinelinux/abuildI want to use snippets from https://github.com/alpinelinux/abuild to
strip binaries and remove header files. What is the license of the
project?
Thank you.
*(from redmine: issue id 9746, created on 2018-12-11, closed on 2019-05-03)*I want to use snippets from https://github.com/alpinelinux/abuild to
strip binaries and remove header files. What is the license of the
project?
Thank you.
*(from redmine: issue id 9746, created on 2018-12-11, closed on 2019-05-03)*https://gitlab.alpinelinux.org/alpine/aports/-/issues/9733Blackbox wm font rendering issue2020-04-10T19:32:28ZTaner TasBlackbox wm font rendering issuehttps://github.com/bbidulock/blackboxwm/issues/21
In case of anyone experienced similar issue on Alpine.
pkgname=blackbox
_pkgname=blackboxwm
pkgver=0.74
pkgrel=0
pkgdesc="Blackbox is a lightweight stacking window m...https://github.com/bbidulock/blackboxwm/issues/21
In case of anyone experienced similar issue on Alpine.
pkgname=blackbox
_pkgname=blackboxwm
pkgver=0.74
pkgrel=0
pkgdesc="Blackbox is a lightweight stacking window manager for X."
url="https://github.com/bbidulock/blackboxwm/"
arch="all"
license="MIT"
makedepends="
autoconf
automake
gettext-dev
libtool
libx11-dev
libxft-dev
libxext-dev
libxt-dev
"
subpackages="$pkgname-dev $pkgname-doc"
source="
$pkgname-$pkgver.tar.gz::https://github.com/bbidulock/blackboxwm/archive/$pkgver.tar.gz
"
builddir="$srcdir/$_pkgname-$pkgver"
prepare() {
cd "$builddir"
sed -e '/AC_DISABLE_SHARED/d' -i configure.ac # Build shared library
./autogen.sh
}
build() {
cd "$builddir"
./configure \
--prefix=/usr \
--mandir=/usr/share/man \
--disable-nls
make
}
check() {
cd "$builddir"
make check
}
package() {
cd "$builddir"
make DESTDIR="$pkgdir" install
}
sha512sums="7d67fe2fe6c0c2e9cd18d494fbba885ab7ca8c7aadcfe5ceada97c1280633b575f3f47a36dc5393c61ae0baf50eef61e56683899913fa58859148148e5041389 blackbox-0.74.tar.gz"
*(from redmine: issue id 9733, created on 2018-12-05)*https://gitlab.alpinelinux.org/alpine/aports/-/issues/9721Issues I did not report are not showing up2019-07-23T11:17:52ZtcelyIssues I did not report are not showing upI noticed this started in the last few days.
*(from redmine: issue id 9721, created on 2018-11-29, closed on 2019-05-03)*I noticed this started in the last few days.
*(from redmine: issue id 9721, created on 2018-11-29, closed on 2019-05-03)*https://gitlab.alpinelinux.org/alpine/aports/-/issues/9595Add gdisk in standard iso2019-07-23T11:19:17ZDavid DemelierAdd gdisk in standard isoHello,
For people who would like to manually install Alpine using the iso + a
miniroot filesystem we can’t do GPT partitioning by default. gdisk does
not seem to be available on default install media (used apk search
gdisk). Or is there...Hello,
For people who would like to manually install Alpine using the iso + a
miniroot filesystem we can’t do GPT partitioning by default. gdisk does
not seem to be available on default install media (used apk search
gdisk). Or is there another tool like fdisk that support GPT
partitioning from the standard ISO?
*(from redmine: issue id 9595, created on 2018-10-29, closed on 2019-03-04)*https://gitlab.alpinelinux.org/alpine/aports/-/issues/9355apline 3.8 missing mariadb-client-libs2019-07-23T11:22:18ZMichael Fayezapline 3.8 missing mariadb-client-libsI can’t find the below files for the alpine release 3.8
<code class="text">
mariadb-client-libs for 3.7 contains
/usr/lib/libmysqlclient.so.18.0.0
/usr/lib/libmysqlclient.so.18
</code>
what is the equivalent apk ...I can’t find the below files for the alpine release 3.8
<code class="text">
mariadb-client-libs for 3.7 contains
/usr/lib/libmysqlclient.so.18.0.0
/usr/lib/libmysqlclient.so.18
</code>
what is the equivalent apk package for 3.8 ??
I’m trying to compile kannel gateway svn version using —with-mysql
directive from here “https://svn.kannel.org/gateway/trunk/”
and hit
<code class="text">
gwlib/utils.c: In function 'version_report_string':
gwlib/utils.c:603:14: error: 'MYSQL_SERVER_VERSION' undeclared (first use in this function)
MYSQL_SERVER_VERSION, mysql_get_client_info(),
^~~~~~~~~~~~~~~~~~~~
</code>
for version 3.7 after installing mariadb-client-libs that provides the
previous files, we can compile kannel gateway.
*(from redmine: issue id 9355, created on 2018-08-28, closed on 2019-05-04)*https://gitlab.alpinelinux.org/alpine/aports/-/issues/9135docker build fails.2019-07-23T11:25:09Zalgitbotdocker build fails.Here is the contents of my Dockerfile
cat Dockerfile
FROM alpine:3.8
COPY server.xml /tmp
RUN sed -i ‘1,/redirectPort=“8443”/ s//redirectPort=“8443”
relaxedQueryChars=“\[\]”/’ /tmp/server.xml
If the alpine version is changed to ...Here is the contents of my Dockerfile
cat Dockerfile
FROM alpine:3.8
COPY server.xml /tmp
RUN sed -i ‘1,/redirectPort=“8443”/ s//redirectPort=“8443”
relaxedQueryChars=“\[\]”/’ /tmp/server.xml
If the alpine version is changed to anything lower than 3.8, noticing
failure in “docker build”.
Error message noticed :- “sed: no previous regexp”
If the alpine version is 3.8, noticing no failure in “docker build”.
Pls let know whether it is a bug or any thing else needs to be done to
execute the sed command with success. The version being used currently
is 3.4
*(from redmine: issue id 9135, created on 2018-07-25, closed on 2018-07-25)*
* Relations:
* duplicates #9137https://gitlab.alpinelinux.org/alpine/aports/-/issues/9121s390x edge pkgs not updating2019-07-23T11:25:19Ztcelys390x edge pkgs not updatingbotan and ntpsec were recently rebuilt and published on all
architectures except s390x
*(from redmine: issue id 9121, created on 2018-07-20, closed on 2019-05-03)*botan and ntpsec were recently rebuilt and published on all
architectures except s390x
*(from redmine: issue id 9121, created on 2018-07-20, closed on 2019-05-03)*https://gitlab.alpinelinux.org/alpine/aports/-/issues/9109build-edge-s390x2019-07-23T11:25:26Ztcelybuild-edge-s390xIs this build machine going to be available going forward?
*(from redmine: issue id 9109, created on 2018-07-17, closed on 2019-05-03)*Is this build machine going to be available going forward?
*(from redmine: issue id 9109, created on 2018-07-17, closed on 2019-05-03)*https://gitlab.alpinelinux.org/alpine/aports/-/issues/9027Package request: hstr - Bash and Zsh shell history suggest box2019-07-23T11:26:05ZThomas SchneiderPackage request: hstr - Bash and Zsh shell history suggest boxCan you please provide this package: hstr
Github available here: https://github.com/dvorka/hstr
*(from redmine: issue id 9027, created on 2018-06-21, closed on 2019-05-03)*Can you please provide this package: hstr
Github available here: https://github.com/dvorka/hstr
*(from redmine: issue id 9027, created on 2018-06-21, closed on 2019-05-03)*https://gitlab.alpinelinux.org/alpine/aports/-/issues/8997Alpine in AWS EC22020-01-20T16:44:17ZJay BauAlpine in AWS EC2I tried to follow this guide:
https://wiki.alpinelinux.org/wiki/Install\_Alpine\_on\_Amazon\_EC2
All seems to be fine, but for some reason I can’t login to the alpine
server.
I even tried setting up a password for user alpine. SSH ke...I tried to follow this guide:
https://wiki.alpinelinux.org/wiki/Install\_Alpine\_on\_Amazon\_EC2
All seems to be fine, but for some reason I can’t login to the alpine
server.
I even tried setting up a password for user alpine. SSH key and password
aren’t working.
Anyone have any luck on this? Thanks in advance.
*(from redmine: issue id 8997, created on 2018-06-13)*3.7.4https://gitlab.alpinelinux.org/alpine/aports/-/issues/8974Alpine does not use nsswitch.conf2019-07-15T03:20:42ZalgitbotAlpine does not use nsswitch.confAlpine does not read nsswitch.conf
This is mandatory for usage of samba winbind.
Is there a workaround or is this a bug?
*(from redmine: issue id 8974, created on 2018-06-07)*Alpine does not read nsswitch.conf
This is mandatory for usage of samba winbind.
Is there a workaround or is this a bug?
*(from redmine: issue id 8974, created on 2018-06-07)*https://gitlab.alpinelinux.org/alpine/aports/-/issues/8961WARNING: The repository tag for world dependency 'apk-tools@edge' does not exist2023-07-29T18:55:53ZalgitbotWARNING: The repository tag for world dependency 'apk-tools@edge' does not existHi,
See the following Docker file where I’m trying to keep using Alpine 3.7
version and installing some package from the edge repository
FROM alpine:3.7
RUN echo "http://dl-cdn.alpinelinux.org/alpine/v3.7/community" >> /etc/ap...Hi,
See the following Docker file where I’m trying to keep using Alpine 3.7
version and installing some package from the edge repository
FROM alpine:3.7
RUN echo "http://dl-cdn.alpinelinux.org/alpine/v3.7/community" >> /etc/apk/repositories
RUN echo "@edgecommunity http://dl-cdn.alpinelinux.org/alpine/edge/community" >> /etc/apk/repositories
RUN echo "@edge http://dl-cdn.alpinelinux.org/alpine/edge/main" >> /etc/apk/repositories
RUN apk add --upgrade apk-tools
RUN apk add --upgrade apk-tools@edge
RUN apk update
# install icinga2
RUN apk add icinga2@edgecommunity
...
But the build keeps failing with the following message :
Step 6/20 : RUN apk add --upgrade apk-tools@edge
---> Running in 6c3fcc6d43f7
WARNING: Ignoring APKINDEX.70c88391.tar.gz: No such file or directory
WARNING: Ignoring APKINDEX.5022a8a2.tar.gz: No such file or directory
WARNING: Ignoring APKINDEX.b53994b4.tar.gz: No such file or directory
WARNING: Ignoring APKINDEX.066df28d.tar.gz: No such file or directory
WARNING: The repository tag for world dependency 'apk-tools@edge' does not exist
ERROR: Not committing changes due to missing repository tags. Use --force-broken-world to override.
The command '/bin/sh -c apk add --upgrade apk-tools@edge' returned a non-zero code: 255
I don’t understand because the package apk-tools exist in the repository
: http://dl-cdn.alpinelinux.org/alpine/edge/main/x86\_64/
Any help will be much appreciate :) bye
*(from redmine: issue id 8961, created on 2018-06-01)*https://gitlab.alpinelinux.org/alpine/aports/-/issues/8916Docker Installation2019-07-23T11:31:21ZalgitbotDocker InstallationHi,
I’m trying to install Docker in the Virtual imagem by following the
wiki(https://wiki.alpinelinux.org/wiki/Docker)
After the service start I got the error “\* ERROR: docker needs
service(s) cgroups”".
How can I solve this issue?...Hi,
I’m trying to install Docker in the Virtual imagem by following the
wiki(https://wiki.alpinelinux.org/wiki/Docker)
After the service start I got the error “\* ERROR: docker needs
service(s) cgroups”".
How can I solve this issue? tks in advance…
System: \#Linux alpinehost 4.9.65-1-virthardened \#2-Alpine SMP Mon Nov
27 15:53:30 GMT 2017 x86\_64 Linux
*(from redmine: issue id 8916, created on 2018-05-18, closed on 2019-05-03)*