aports issueshttps://gitlab.alpinelinux.org/alpine/aports/-/issues2019-07-12T14:22:33Zhttps://gitlab.alpinelinux.org/alpine/aports/-/issues/43syslinux.cfg serial console fails to boot as of 1.9.0_alpha122019-07-12T14:22:33Zaa latchmsyslinux.cfg serial console fails to boot as of 1.9.0_alpha12~# cat /etc/alpine-release
alpine-1.9.0_alpha12 090519
Here is the syslinux.cfg file. Note that the **serial 0 9600** line
works fine; the problem is with **console=ttyS0,9600**
~# cat /media/sda1/syslinux.cfg
serial 0 9600...~# cat /etc/alpine-release
alpine-1.9.0_alpha12 090519
Here is the syslinux.cfg file. Note that the **serial 0 9600** line
works fine; the problem is with **console=ttyS0,9600**
~# cat /media/sda1/syslinux.cfg
serial 0 9600
timeout 20
prompt 1
default grsec
label grsec
kernel /boot/grsec
append initrd=/boot/grsec.gz alpine_dev=sda1:vfat modules=sd-mod,usb-storage console=ttyS0,9600
With the **console** option, the boot messages are output to the serial
console as specified (ttyS0,9600). However, there is a call trace as
shown below:
* Mounting boot media: ok.
* Mounting loopback device for kernel modules: ok.
* Loading hardware drivers: general protection fault: 0000 [#1] SMP
last sysfs file: /sys/devices/platform/pcspkr/input/input3/event3/dev
Modules linked in: serio_raw pcspkr shpchp pci_hotplug i2c_viapro i2c_core via_rhine snd_via82xx snd_ac97_codec ac97_bus snd_pcm snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore gameport firewire_ohci firewire_core crc_itu_t via_agp agpgart r8169 mii bitrev crc32 evdev fan 8250_pnp parport_pc parport thermal button processor cramfs zlib_inflate loop nls_iso8859_1 nls_cp437 vfat fat nls_base sata_via ehci_hcd uhci_hcd ide_pci_generic via82cxxx ide_core ata_generic pata_acpi pata_via libata usb_storage libusual usbcore sd_mod scsi_mod
Pid: 1, comm: init Not tainted (2.6.28.9-grsec #1)
EIP: 0060:[<c090d024>] EFLAGS: 00010046 CPU: 0
EAX: 00000000 EBX: f702c000 ECX: f7380000 EDX: 00000282
ESI: f7095c00 EDI: f7380400 EBP: 00000004 ESP: f702bf10
DS: 0068 ES: 0068 FS: 00d8 GS: 0000 SS: 0068
Process init (pid: 1, ti=f702a000 task=f702c000 task.ti=f702a000)
Stack:
f702c000 f7380000 c08ffb60 c08fe449 f7380400 f7042c00 f73800e4 f7380000
00000000 f702c000 c081e3e6 f73800e8 f73800e8 00000004 f7380000 00000004
00000000 c08fc98e 00000004 00000004 4e9ea5fc f7042c00 c08fe364 f7380014
Call Trace:
[<c08ffb60>] 0xc08ffb60
[<c08fe449>] 0xc08fe449
[<c081e3e6>] 0xc081e3e6
[<c08fc98e>] 0xc08fc98e
[<c08fe364>] 0xc08fe364
[<c08fca06>] 0xc08fca06
[<c0865990>] 0xc0865990
[<c0865a95>] 0xc0865a95
[<c08035e2>] 0xc08035e2
Code: 2b 58 50 8b 46 14 81 e3 ff 0f 00 00 e8 e8 e0 09 00 89 d8 5b 5e c3 56 53 8b b0 10 01 00 00 8b 46 14 e8 d9 df 09 00 89 c2 8b 46 10 <8b> 58 4c f7 d3 03 58 50 8b 46 14 81 e3 ff 0f 00 00 e8 b8 e0 09
EIP: [<c090d024>] SS:ESP 0068:f702bf10
---[ end trace 85bbaa23d218b230 ]---
The full boot output is attached.
*(from redmine: issue id 43, created on 2009-06-03, closed on 2009-08-06)*Alpine 1.9Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/41winbind permissions not set correctly2019-07-12T14:22:32ZChristophe Massereywinbind permissions not set correctlyWhen booting Alpine 1.8.3 with samba installed with winbind, permission
on /var/cache/samba/winbindd\_privileged/ is not set correctly. Squid is
therefore unable to authenticate against Windows AD. A temporary
workaround until the bug? i...When booting Alpine 1.8.3 with samba installed with winbind, permission
on /var/cache/samba/winbindd\_privileged/ is not set correctly. Squid is
therefore unable to authenticate against Windows AD. A temporary
workaround until the bug? is fixed is to set ‘chown .squid
/var/cache/samba/winbindd\_privileged/’ manually and restart squid.
*(from redmine: issue id 41, created on 2009-06-02, closed on 2009-09-04)*Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/40Encypted apkovls not working on alpine-1.9.0_alpha122023-04-05T01:43:23Zaa latchmEncypted apkovls not working on alpine-1.9.0_alpha12On Alpine 1.9.0\_alpha12, encrypted overlay fails to load.
Error message:
* Loading user settings from /media/sda1/host.apkovl.tar.gz.aes-256-cbc: openssl: can't load library 'libdl.so.0'
failed. Cipher aes-256-cbc not support...On Alpine 1.9.0\_alpha12, encrypted overlay fails to load.
Error message:
* Loading user settings from /media/sda1/host.apkovl.tar.gz.aes-256-cbc: openssl: can't load library 'libdl.so.0'
failed. Cipher aes-256-cbc not supported.
initramfs emergency recovery shell launched. Type 'exit' to continue boot
*(from redmine: issue id 40, created on 2009-06-01, closed on 2009-06-23)*Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/38asterisk ctl is not created2019-07-12T14:22:31ZFrancesco Colistaasterisk ctl is not createdIn alpha12, asterisk.ctl is not created in /var/run/asterisk dir.
The daemon start, but not working. Temporary workaround: kill all
asterisk processes, then restart asterisk daemon.
Behavior: alpine 1.9 alpha12 with asterisk 1.6.0.9
...In alpha12, asterisk.ctl is not created in /var/run/asterisk dir.
The daemon start, but not working. Temporary workaround: kill all
asterisk processes, then restart asterisk daemon.
Behavior: alpine 1.9 alpha12 with asterisk 1.6.0.9
*(from redmine: issue id 38, created on 2009-05-25, closed on 2009-06-23)*
* Changesets:
* Revision fb65711545433ae5aed3b0e707ab7ae2698424ac on 2009-06-01T15:01:21Z:
```
extra/asterisk: set rundir to /var/run/asterisk
fixes #38
```https://gitlab.alpinelinux.org/alpine/aports/-/issues/37IPsec-Tools Prior to 0.7.2 Multiple Remote Denial Of Service Vulnerabilities2019-07-12T14:22:31Ziilluzion _IPsec-Tools Prior to 0.7.2 Multiple Remote Denial Of Service Vulnerabilities**Related Alpine Linux releases**: All earlier releases including
alpine-1.8.1
\* US-CERT reports:
http://web.nvd.nist.gov/view/vuln/detail?execution=e1s1
>racoon/isakmp\_frag.c in ipsec-tools before 0.7.2 allows remote
attackers to ca...**Related Alpine Linux releases**: All earlier releases including
alpine-1.8.1
\* US-CERT reports:
http://web.nvd.nist.gov/view/vuln/detail?execution=e1s1
>racoon/isakmp\_frag.c in ipsec-tools before 0.7.2 allows remote
attackers to cause a denial of service (crash) via crafted fragmented
packets without a payload, which triggers a NULL pointer dereference.
\* US-CERT reports:
http://web.nvd.nist.gov/view/vuln/detail?execution=e5s1
>Multiple memory leaks in Ipsec-tools before 0.7.2 allow remote
attackers to cause a denial of service (memory consumption) via vectors
involving (1) signature verification during user authentication with
X.509 certificates, related to the eay\_check\_x509sign function in
src/racoon/crypto\_openssl.c; and (2) the NAT-Traversal (aka NAT-T)
keepalive implementation, related to src/racoon/nattraversal.c.
*(from redmine: issue id 37, created on 2009-05-23, closed on 2009-06-23)*Natanael CopaNatanael Copa2009-05-30https://gitlab.alpinelinux.org/alpine/aports/-/issues/36"Sign In" page is not protected with SSL2019-07-12T14:22:30Ziilluzion _"Sign In" page is not protected with SSLUser *credentials* are being transfered in *clear* text. It may lead to
*leaking* of *sensitive* information and therefore potentially to an
*unauthorized access* to this site.
*(from redmine: issue id 36, created on 2009-05-21, closed...User *credentials* are being transfered in *clear* text. It may lead to
*leaking* of *sensitive* information and therefore potentially to an
*unauthorized access* to this site.
*(from redmine: issue id 36, created on 2009-05-21, closed on 2011-11-22)*Carlo LandmeterCarlo Landmeter2009-05-28https://gitlab.alpinelinux.org/alpine/aports/-/issues/34Asterisk on Alpine 1.9 alpha122019-07-12T14:22:27ZFrancesco ColistaAsterisk on Alpine 1.9 alpha12Asterisk won’t start because the dir /var/run/asterisk do not exist.
Asterisk try to create .pid file in this directory.
Temporary workaround: create folder /var/run/asterisk with
asterisk.asterisk permission and include /var/run path ...Asterisk won’t start because the dir /var/run/asterisk do not exist.
Asterisk try to create .pid file in this directory.
Temporary workaround: create folder /var/run/asterisk with
asterisk.asterisk permission and include /var/run path into
/etc/lbu/include.conf.
*(from redmine: issue id 34, created on 2009-05-21, closed on 2009-06-23)*https://gitlab.alpinelinux.org/alpine/aports/-/issues/33/var/log/lastlog missing2023-01-08T23:59:22ZLeonardo Arena/var/log/lastlog missingssh daemon starting up gives this error:
lastlog\_openseek: Couldn’t stat /var/log/lastlog:No such file or
directory
*(from redmine: issue id 33, created on 2009-05-18, closed on 2009-06-23)*
* Changesets:
* Revision abeb4645b5f35b...ssh daemon starting up gives this error:
lastlog\_openseek: Couldn’t stat /var/log/lastlog:No such file or
directory
*(from redmine: issue id 33, created on 2009-05-18, closed on 2009-06-23)*
* Changesets:
* Revision abeb4645b5f35bfe0876adebe89838e0b39bf471 on 2009-05-18T12:34:26Z:
```
core/openssh: disable lastlog
fixes #33
```https://gitlab.alpinelinux.org/alpine/aports/-/issues/321.9alpha10 - USB doesn't mount at boot2024-03-27T19:29:00ZMika Havela1.9alpha10 - USB doesn't mount at bootSeems we don’t get /dev/usbdisk when booting up Alpine1.9alpha10 with a
USB-mem inserted when starting up the box.
After ejecting/reinserting the mem, we can mount the USB-mem
*(from redmine: issue id 32, created on 2009-05-16, closed...Seems we don’t get /dev/usbdisk when booting up Alpine1.9alpha10 with a
USB-mem inserted when starting up the box.
After ejecting/reinserting the mem, we can mount the USB-mem
*(from redmine: issue id 32, created on 2009-05-16, closed on 2009-05-20)*
* Relations:
* duplicates #28
* Changesets:
* Revision 4501a6cc5eb5542c5172ae391ae54377b440e1bf by Oliver Smith on 2018-03-20T14:09:58Z:
```
Don't print 'git: not found' errors
abuild, as packaged in Alpine Linux, does not depend on git. But when
you use it without git, it will print out errors like the following:
/usr/bin/abuild: line 2554: git: not found
With this commit, it saves the git_path in the beginning (just like
abuild_path). Later in the code it does not try to run git if that
variable is empty.
Notably `abuild rootbld` is already checking whether `abuild-rootbld`
is installed, and that subpackage of `abuild` does already depend on
`git`. So no additional check was added before using `git ` inside
`rootbld`.
Fixes #32
```https://gitlab.alpinelinux.org/alpine/aports/-/issues/311.9alpha10 - Can not mount floppy2023-01-08T23:59:21ZMika Havela1.9alpha10 - Can not mount floppySeems floppy module is not loaded at boot
*(from redmine: issue id 31, created on 2009-05-16, closed on 2009-05-20)*Seems floppy module is not loaded at boot
*(from redmine: issue id 31, created on 2009-05-16, closed on 2009-05-20)*https://gitlab.alpinelinux.org/alpine/aports/-/issues/30Alpine_1.9alpha9 - Postfix should use '/usr/lib/postfix' instead of '/usr/lib...2023-01-08T23:59:21ZMika HavelaAlpine_1.9alpha9 - Postfix should use '/usr/lib/postfix' instead of '/usr/libexec/postfix'Reasons are:
- FHS
(http://www.pathname.com/fhs/pub/fhs-2.3.html\#USRLIBLIBRARIESFORPROGRAMMINGANDPA)
- Compability
*(from redmine: issue id 30, created on 2009-05-14, closed on 2009-05-14)*
* Changesets:
* Revision b846d7e...Reasons are:
- FHS
(http://www.pathname.com/fhs/pub/fhs-2.3.html\#USRLIBLIBRARIESFORPROGRAMMINGANDPA)
- Compability
*(from redmine: issue id 30, created on 2009-05-14, closed on 2009-05-14)*
* Changesets:
* Revision b846d7e6a255de4c6ad97c536e0093952abca2f1 on 2009-05-14T12:23:53Z:
```
extra/postfix: use /usr/lib/postfix instead of /usr/libexec/postfix
fixes #30
```https://gitlab.alpinelinux.org/alpine/aports/-/issues/29alpine_1.9alpha9 - Wrong permissions on /root/2019-07-12T14:22:25ZMika Havelaalpine_1.9alpha9 - Wrong permissions on /root/Seems permissions are wrong on /root/
I guess it should be 755
*(from redmine: issue id 29, created on 2009-05-13, closed on 2009-05-20)*Seems permissions are wrong on /root/
I guess it should be 755
*(from redmine: issue id 29, created on 2009-05-13, closed on 2009-05-20)*https://gitlab.alpinelinux.org/alpine/aports/-/issues/28lbu commit floppy not working on 1.9alpha92019-07-12T14:22:24ZMika Havelalbu commit floppy not working on 1.9alpha9Seems like lbu commit doesn’t work on alpha9.
I tried doing ‘lbu commit floppy’ (have not tried committing to usb).
*(from redmine: issue id 28, created on 2009-05-12, closed on 2009-05-20)*
* Relations:
* duplicates #32
* Changes...Seems like lbu commit doesn’t work on alpha9.
I tried doing ‘lbu commit floppy’ (have not tried committing to usb).
*(from redmine: issue id 28, created on 2009-05-12, closed on 2009-05-20)*
* Relations:
* duplicates #32
* Changesets:
* Revision c8b2c27eec71cb76af24ca40cada2a15e497f415 on 2009-05-13T15:04:47Z:
```
initfs: add floppy kernel module
fixes #28
```Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/27asterisk packages Alpine 1.9.x2019-07-23T13:42:39ZFrancesco Colistaasterisk packages Alpine 1.9.xAlpine 1.9.0-alpha9\_pre2 has not asterisk-tds and asterisk-sounds
packages.
Will be useful add these packages in the next versions of Alpine.
*(from redmine: issue id 27, created on 2009-05-01, closed on 2009-06-23)*Alpine 1.9.0-alpha9\_pre2 has not asterisk-tds and asterisk-sounds
packages.
Will be useful add these packages in the next versions of Alpine.
*(from redmine: issue id 27, created on 2009-05-01, closed on 2009-06-23)*https://gitlab.alpinelinux.org/alpine/aports/-/issues/21vserver only has 16mb /tmp directory2023-03-04T22:40:32ZCarlo Landmetervserver only has 16mb /tmp directoryWhen i try to run clamav it will fail because it cannot extract the
database to tmp directory because of insufficient space.
I am running vserver 1.7 with 1.9 guest.
*(from redmine: issue id 21, created on 2009-03-30, closed on 2009-...When i try to run clamav it will fail because it cannot extract the
database to tmp directory because of insufficient space.
I am running vserver 1.7 with 1.9 guest.
*(from redmine: issue id 21, created on 2009-03-30, closed on 2009-04-02)*Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/17Package 'ncftp-3.2.2-r1' contains deprecated .INSTALL2021-07-26T18:50:00ZNatanael CopaPackage 'ncftp-3.2.2-r1' contains deprecated .INSTALLShould be converted to new style pre-install
*(from redmine: issue id 17, created on 2009-03-24, closed on 2009-03-26)*
* Changesets:
* Revision 044bf35ebe0ece74d5a386050c69f77b82a9f0ff by Carlo Landmeter on 2009-03-25T21:39:19Z:
`...Should be converted to new style pre-install
*(from redmine: issue id 17, created on 2009-03-24, closed on 2009-03-26)*
* Changesets:
* Revision 044bf35ebe0ece74d5a386050c69f77b82a9f0ff by Carlo Landmeter on 2009-03-25T21:39:19Z:
```
extra/ncftp: switched to new install file.
fixes #17
```Carlo LandmeterCarlo Landmeterhttps://gitlab.alpinelinux.org/alpine/aports/-/issues/16Package 'transmission-1.51-r0' contains deprecated .INSTALL2023-01-08T23:59:22ZNatanael CopaPackage 'transmission-1.51-r0' contains deprecated .INSTALLShould be converted to new style pre/post-install
*(from redmine: issue id 16, created on 2009-03-24, closed on 2009-03-26)*
* Changesets:
* Revision bbd7886cd79ad2060c9199c768991035228905f7 by Carlo Landmeter on 2009-03-25T21:46:06...Should be converted to new style pre/post-install
*(from redmine: issue id 16, created on 2009-03-24, closed on 2009-03-26)*
* Changesets:
* Revision bbd7886cd79ad2060c9199c768991035228905f7 by Carlo Landmeter on 2009-03-25T21:46:06Z:
```
extra/transmission: updated install file to new style.
fixes #16
```Carlo LandmeterCarlo Landmeterhttps://gitlab.alpinelinux.org/alpine/aports/-/issues/15Alpine 1.9.x cannot boot from CD and read configs from USB2022-08-05T00:46:03ZNatanael CopaAlpine 1.9.x cannot boot from CD and read configs from USBWe need to fix the init script to look for and find configureation media
on usb devices.
We might need do soemthing smart to figure out that we have an USB
device that is not settled yet and wait for it or something similar.
*(from re...We need to fix the init script to look for and find configureation media
on usb devices.
We might need do soemthing smart to figure out that we have an USB
device that is not settled yet and wait for it or something similar.
*(from redmine: issue id 15, created on 2009-03-23, closed on 2009-03-27)*Natanael CopaNatanael Copahttps://gitlab.alpinelinux.org/alpine/aports/-/issues/14extra/tar: needs post-deinstall script2022-08-05T00:46:03ZNatanael Copaextra/tar: needs post-deinstall scriptbusybox package no longer contain all the symlinks. they are created in
post-install/upgrade.
Therefore all packages that overwrites the busybox links needs to run
‘busybox —install -s’ in a post-deinstall script.
tar is one of them.
...busybox package no longer contain all the symlinks. they are created in
post-install/upgrade.
Therefore all packages that overwrites the busybox links needs to run
‘busybox —install -s’ in a post-deinstall script.
tar is one of them.
*(from redmine: issue id 14, created on 2009-03-23, closed on 2009-03-26)*
* Changesets:
* Revision 183d1b18313f2cf05d79dce4e40d11a75185acb9 by Carlo Landmeter on 2009-03-25T21:52:22Z:
```
extra/tar: new install script, new style.
fixes #14
```Carlo LandmeterCarlo Landmeterhttps://gitlab.alpinelinux.org/alpine/aports/-/issues/12crond doesnt seem to succesfully execute run-parts2023-10-18T19:57:20Zalgitbotcrond doesnt seem to succesfully execute run-partsWhen i try to run run-parts manually it doesn’t seem to work either
*(from redmine: issue id 12, created on 2009-03-22, closed on 2009-03-23)*When i try to run run-parts manually it doesn’t seem to work either
*(from redmine: issue id 12, created on 2009-03-22, closed on 2009-03-23)*Natanael CopaNatanael Copa