GitLab

This commit updates $license variable in all APKBUILDs to comply with
short names specified by SPDX version 3.0 [1] where possible. It was
done using find-and-replace method on substrings inside $license
variables.

Only license names were updated, not "expressions" specifying relation
between the licenses (e.g. "X and Y", "X or Y", "X and (Y or Z)") or
exceptions (e.g. "X with exceptions").

Many licenses have a version or multiple variants, e.g. MPL-2.0,
BSD-2-Clause, BSD-3-Clause. However, $license in many aports do not
contain license version or variant. Since there's no way how to infer
this information just from abuild, it were left without the variant
suffix or version, i.e. non SPDX compliant.

GNU licenses (AGPL, GFDL, GPL, LGPL) are especially complicated. They
exist in two variants: -only (formerly e.g. GPL-2.0) and -or-later
(formerly e.g. GPL-2.0+). We did not systematically noted distinguish
between these variants, so GPL-2.0, GPL2, GPLv2 etc. may mean
GPL-2.0-only or GPL-2.0-or-later. Thus GNU licenses without "+" (e.g.
GPL2+) were left without the variant suffix, i.e. non SPDX compliant.

Note: This commit just fixes format of the license names, no
verification has been done if the specified license information is
actually correct!

[1]: https://spdx.org/licenses/

* main/dovecot: Properly set primary group in .pre-install.
main/dovecot/dovecot.pre-install

* main/{npre,postgrey}: Properly set primary group in .pre-install.
main/nrpe/nrpe.pre-install
main/postgrey/postgrey.pre-install

* main/ympd: Reorder arguments in .pre-install as in da4e96aa.
main/ympd/ympd.pre-install

* main/znc: Reorder arguments in .pre-install as in da4e96aa.
main/znc/znc.pre-install

* main/aports-build: Reorder arguments in .pre-install as in da4e96aa.
main/aports-build/aports-build.pre-install

* main/atheme-iris: Fix overlooked consistency issue as in a60b9f07.
main/atheme-iris/atheme-iris.pre-install

* main/[various]: Add group and use it as primary in .pre-* scripts.
main/apache2/apache2.pre-install
main/aports-build/aports-build.pre-install
main/atheme-iris/atheme-iris.pre-install
main/clamav/clamav-db.pre-install
main/clamsmtp/clamsmtp.pre-install
main/clamsmtp/clamsmtp.pre-upgrade
main/coova-chilli/coova-chilli.pre-install
main/dhcp/dhcp.pre-install
main/djbdns/dnscache.pre-install
main/djbdns/tinydns.pre-install
main/ez-ipupdate/ez-ipupdate.pre-install
main/fetchmail/fetchmail.pre-install
main/freeswitch/freeswitch.pre-install
main/gitolite/gitolite.pre-install
main/gnats/gnats.pre-install
main/gross/gross.pre-install
main/icecast/icecast.pre-install
main/memcached/memcached.pre-install
main/ngircd/ngircd.pre-install
main/openntpd/openntpd.pre-install
main/snort/snort.pre-install
main/squid/squid.pre-install
main/squid/squid.pre-upgrade
main/transmission/transmission-daemon.pre-install
main/znc/znc.pre-install

Fixes the problem I unintentionally brought in commit ccc056db:
system user creation doesn't add same named group and uses nogroup as
primary group unless explicitly specified via -G.

Brings status quo regarding primary groups of users created in packages:
- main/apache2
- main/aports-build
- main/atheme-iris
- main/clamav
- main/clamsmtp
- main/coova-chilli
- main/dhcp
- main/djbdns
- main/ez-ipupdate
- main/fetchmail
- main/freeswitch
- main/gitolite
- main/gnats
- main/gross
- main/icecast
- main/memcached
- main/ngircd
- main/openntpd
- main/snort
- main/squid
- main/transmission
- main/znc

Now all invocations have following order of arguments (if present):

    addgroup -S -g ... GROUP
    adduser -S -u ... -D -H -h ... -s ... -G ... -g ... USER

Following rules have been applied:
- script starts with shebang !#/bin/sh followed by blank line,
- script ends with exit 0 prepended by blank line,
- only stderr of adduser, addgroup or passwd is redirected to /dev/null,
- getent passwd/group instances has been removed,
- manual checking of file and group existence has been removed,
- `|| true` instances has been removed.

Comments and line wrapping have been preserved.

Groups and users created by packages shouldn't use high ids by default
(unless explicitly requested), to distinguish them from groups and users
created by administrators for humans.

Following 41 files lacked -S next to addgroup:
- community/sword/sword.pre-install
- main/amavisd-new/amavisd-new.pre-install
- main/chrony/chrony.pre-install
- main/cvechecker/cvechecker.pre-install
- main/dnsmasq/dnsmasq.pre-install
- main/freeradius/freeradius.pre-install
- main/gdnsd/gdnsd.pre-install
- main/haproxy/haproxy.pre-install
- main/haproxy/haproxy.pre-upgrade
- main/kamailio/kamailio.pre-install
- main/logcheck/logcheck.pre-install
- main/mlmmj/mlmmj.pre-install
- main/nrpe/nrpe.pre-install
- main/open-vm-tools/open-vm-tools.pre-install
- main/postgrey/postgrey.pre-install
- main/privoxy/privoxy.pre-install
- main/redis/redis.pre-install
- main/samba/winbind.pre-install
- main/sircbot/sircbot.pre-install
- main/smokeping/smokeping.pre-install
- main/squark/squark.post-install
- main/squid/squid.pre-install
- main/squid/squid.pre-upgrade
- main/subversion/subversion.pre-install
- main/trac/trac.pre-install
- main/vsftpd/vsftpd.pre-install
- main/zabbix/zabbix-agent.pre-install
- testing/3proxy/3proxy.pre-install
- testing/cluster-glue/cluster-glue.pre-install
- testing/elasticsearch/elasticsearch.pre-install
- testing/emby/emby.pre-install
- testing/gdnsd/gdnsd.pre-install
- testing/icinga2/icinga2.pre-install
- testing/lusca/lusca.pre-install
- testing/lusca/lusca.pre-upgrade
- testing/mongodb/mongodb.pre-install
- testing/openxcap/openxcap.pre-install
- testing/prosody/prosody.pre-install
- testing/rancid/rancid.pre-install
- testing/rutorrent/rutorrent.pre-install
- testing/zabbix/zabbix-agent.pre-install

Following 60 files lacked -S next to adduser:
- community/caddy/caddy.pre-install
- community/domoticz/domoticz.pre-install
- community/minetest/minetest-server.pre-install
- community/oscam/oscam.pre-install
- community/seafile/seafile-server.pre-install
- community/syncthing/syncthing.pre-install
- main/apache2/apache2.pre-install
- main/aports-build/aports-build.pre-install
- main/atheme-iris/atheme-iris.pre-install
- main/bind/bind.pre-install
- main/clamav/clamav-db.pre-install
- main/clamsmtp/clamsmtp.pre-install
- main/clamsmtp/clamsmtp.pre-upgrade
- main/coova-chilli/coova-chilli.pre-install
- main/cvechecker/cvechecker.pre-install
- main/dhcp/dhcp.pre-install
- main/distcc/distcc.pre-install
- main/djbdns/dnscache.pre-install
- main/djbdns/tinydns.pre-install
- main/dovecot/dovecot.pre-install
- main/ez-ipupdate/ez-ipupdate.pre-install
- main/fetchmail/fetchmail.pre-install
- main/freeswitch/freeswitch.pre-install
- main/gitolite/gitolite.pre-install
- main/gnats/gnats.pre-install
- main/gross/gross.pre-install
- main/icecast/icecast.pre-install
- main/kamailio/kamailio.pre-install
- main/lighttpd/lighttpd.pre-install
- main/mariadb/mariadb.pre-install
- main/memcached/memcached.pre-install
- main/ngircd/ngircd.pre-install
- main/nrpe/nrpe.pre-install
- main/openntpd/openntpd.pre-install
- main/postgrey/postgrey.pre-install
- main/snort/snort.pre-install
- main/squid/squid.pre-install
- main/squid/squid.pre-upgrade
- main/subversion/subversion.pre-install
- main/trac/trac.pre-install
- main/transmission/transmission-daemon.pre-install
- main/ympd/ympd.pre-install
- main/znc/znc.pre-install
- testing/at/at.pre-install
- testing/buildbot-slave/buildbot-slave.pre-install
- testing/buildbot/buildbot.pre-install
- testing/clapf/clapf.pre-install
- testing/cluster-glue/cluster-glue.pre-install
- testing/dbmail/dbmail.pre-install
- testing/dspam/dspam.pre-install
- testing/ejabberd/ejabberd.pre-install
- testing/emby/emby.pre-install
- testing/mongodb/mongodb.pre-install
- testing/opensips/opensips.pre-install
- testing/pdns/pdns.pre-install
- testing/prosody/prosody.pre-install
- testing/qpage/qpage.pre-install
- testing/rrdbot/rrdbot.pre-install
- testing/wt/wt.pre-install
- unmaintained/ejabberd-git/ejabberd-git.pre-install

ref #943

The jumbo patch includes the 32bit version of the generated header files.
This might break 64 bit builds depending on unpacking timestamps etc.

We fix it by removing the generated headers, including uint32.h

ref #933

This reverts commit 8320da39.

The jumbo patch includes the 32bit version of the generated header files.
This might break 64 bit builds depending on unpacking timestamps etc.

We fix it by removing the generated headers

ref #933

http://www.fefe.de/dns/

this is needed for apk-tools-2.1 migration

This also splits the djbdns to djbdns-common that contains the
few utilities needed by the periodic script. Minor fix to init.d
script included also.
Signed-off-by: Timo Teras <timo.teras@iki.fi>
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>

Adds a patch which combines the following patches:
- Claudiu Costin's jumbo-p13.patch
  http://www.ro.kde.org/djbdns/mywork/jumbo/jumbo-p13.patch.gz
- Guilherme Balena Versiani's djbdns SRV+NAPTR combined patch
  http://mywebpage.netscape.com/guibv/djbdns-1.05-srvnaptr.diff

Patch taken from:
http://lizzy.dyndns.org/~jos/djbdns-1.05-jumbo-josb.patch

see #164

fixes #162

to not set uncoditionally FORWARDONLY. just the mere existance of
the env variable changes dnscache behaviour. fixes #147.

fixes #120
Thanks to Nathan for solving this.

fixes #120

fixes #101

and fixed misc build issues