Commit bbad1f08 authored by Natanael Copa's avatar Natanael Copa

testing/alsa-utils: new aport

Advanced Linux Sound Architecture Utils (alsactl, alsamixer, etc.)
http://www.alsa-project.org
parent f3e62894
# Maintainer: Natanael Copa <ncopa@alpinelinux.org>
pkgname=alsa-utils
pkgver=1.0.21
pkgrel=0
pkgdesc="Advanced Linux Sound Architecture Utils (alsactl, alsamixer, etc.)"
url="http://www.alsa-project.org"
license="GPL"
makedepends="alsa-lib-dev pciutils-dev ncurses-dev"
depends="dialog"
subpackages="$pkgname-doc"
source="ftp://ftp.alsa-project.org/pub/utils/$pkgname-$pkgver.tar.bz2
alsaconf.patch
alsa.initd
alsa.confd
"
build() {
cd "$srcdir"/$pkgname-$pkgver
patch -Np1 -i ../alsaconf.patch || return 1
./configure --prefix=/usr \
--disable-xmlto \
|| return 1
make || return 1
}
package() {
cd "$srcdir"/$pkgname-$pkgver
make DESTDIR="$pkgdir" install
install -D -m755 ../alsa.initd "$pkgdir"/etc/init.d/alsa
install -D -m644 ../alsa.confd "$pkgdir"/etc/conf.d/alsa
}
md5sums="3672287c2608040d111ce45495ba7602 alsa-utils-1.0.21.tar.bz2
5e65f278b5a77e3ee2821ad955c4cd91 alsaconf.patch
4a66dad46d5366e05098cde97f3d37b5 alsa.initd
85b1f1e759fe5953eca329237f4ac256 alsa.confd"
# ENABLE_OSS_EMUL:
# Do you want to enable in-kernel oss emulation?
# no - Do not load oss emul drivers
# yes - Load oss emul drivers if they're found
ENABLE_OSS_EMUL="yes"
# RESTORE_ON_START:
# Do you want to restore your mixer settings? If not, your cards will be
# muted.
# no - Do not restore state
# yes - Restore state
RESTORE_ON_START="yes"
# SAVE_ON_STOP:
# Do you want to save changes made to your mixer volumes when alsasound
# stops?
# no - Do not save state
# yes - Save state
SAVE_ON_STOP="yes"
# LOAD_ON_START:
# Do you want to load sound modules when alsasound starts?
# Note: The Gentoo ALSA developers encourage you to build your sound
# drivers into the kernel unless the device is hotpluggable or
# you need to supply specific options (such as model= to HD-Audio).
# no - Do not load modules
# yes - Load modules
LOAD_ON_START="yes"
#!/sbin/runscript
# $Header: /var/cvsroot/gentoo-x86/media-sound/alsa-utils/files/alsasound.initd-r4,v 1.1 2009/08/02 11:27:26 ssuominen Exp $
# Copyright 2007 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
alsastatedir=/var/lib/alsa
alsascrdir=/etc/alsa.d
opts="save restore"
depend() {
need localmount
after bootmisc modules isapnp coldplug hotplug hwdrivers
}
load_modules() {
# List of drivers for each card.
local DRIVERS="$(modprobe -c | sed -n -e 's/^alias \(snd-card-[[:digit:]]\+\) .*/\1/p')"
# Fall back on the automated aliases if we don't have ALSA configured properly...
if [ -z "${DRIVERS}" ] && \
( [ ! -r /proc/asound/cards ] || grep -q ' no soundcards ' /proc/asound/cards 2>/dev/null ) ; then
ewarn "Could not detect custom ALSA settings. Loading all detected alsa drivers."
DRIVERS="$(modprobe -c | sed -n -e '/^alias pci:.* snd.*/ s/^alias pci:[^ ]* \(.*\)/\1/p' | sort | uniq)"
if [ -z "${DRIVERS}" ] ; then
eerror "Unable to find any ALSA drivers. Have you compiled alsa-drivers correctly?"
fi
fi
if [ "${ENABLE_OSS_EMUL}" = "yes" ] ; then
DRIVERS="${DRIVERS} $(modprobe -l | sed -n -e '/snd.*oss/ s:.*\/\([[:alnum:]_-]\+\).ko:\1:p')"
fi
# We want to ensure snd-seq is loaded as it is needed for things like
# timidity even if we don't use a real sequencer.
DRIVERS="${DRIVERS} $(modprobe -l | sed -n -e '/snd.seq\./ s:.*\/\([[:alnum:]_-]\+\).ko:\1:p')"
# We want to ensure snd-ioctl32 is loaded as it is needed for 32bit
# compatibility
DRIVERS="${DRIVERS} $(modprobe -l | sed -n -e '/snd.ioctl32\./ s:.*\/\([[:alnum:]_-]\+\).ko:\1:p')"
local DRIVER= DMOD=
for DRIVER in ${DRIVERS} ; do
[ "${DRIVER}" = "off" ] && continue
DMOD="$(echo "${DRIVER}" | sed -e 's/-/_/g')"
if ! grep -q "^${DMOD} " /proc/modules ; then
ebegin "Loading: ${DRIVER}"
modprobe ${DRIVER}
eend $?
fi
done
if [ -f /proc/asound/seq/drivers ] ; then
local SEQUENCERS="$(sed -n -e 's/\([^,]*\),empty,.*/\1/p' /proc/asound/seq/drivers)"
local SEQUENCER
for SEQUENCER in ${SEQUENCERS} ; do
DMOD="$(echo "${SEQUENCER}" | sed -e 's/-/_/g')"
if ! grep -q "^${DMOD} " /proc/modules ; then
ebegin "Loading: ${SEQUENCER}"
modprobe ${SEQUENCER}
eend $?
fi
done
fi
for DRIVER in ${DRIVERS}
do
local TMP=${DRIVER##snd-}
TMP=${TMP##snd_}
if [ -x "${alsascrdir}/${TMP}" ] ; then
ebegin "Running: ${alsascrdir}/${TMP}"
"${alsascrdir}/${TMP}"
eend $?
fi
done
if [ ! -d /proc/asound ] || grep -q ' no soundcards ' /proc/asound/cards ; then
eerror "ERROR: Failed to load necessary drivers"
return 1
fi
}
unload_modules_24() {
local LOADED_MODULES="$(lsmod | sed -n -e 's/^\(snd[^ ]*\) .*/\1/p')"
local MODULE
for MODULE in ${LOADED_MODULES} ; do
rmmod "${MODULE}"
done
rmmod soundcore 2>/dev/null
rmmod gameport 2>/dev/null
lsmod | grep -vq '^snd'
}
unload_modules_recursive() {
local revdeps="$(lsmod | sed -n -e "s/,/ /g" -e "s/^$1 *[0-9]* *[0-9]* \(.*\)/\1/p")"
for module in ${revdeps} ; do
unload_modules_recursive "${module}"
done
vebegin "Unloading: $1"
rmmod --wait "$1"
veend $?
}
unload_modules_26() {
# First of all, remove the snd module and all the modules depending
# on it, this should remove already most of ALSA modules.
lsmod | grep -q "^snd[[:space:]]" && unload_modules_recursive snd
# Then find the remaining ones, and handle them too.
for module in $(lsmod | sed -n -e 's/^\(snd[^ ]*\) .*/\1/p'); do
unload_modules_recursive "${module}"
done
lsmod | grep -vq "^snd"
}
terminate() {
#
# Kill processes holding open sound devices
#
# DEVS=`find /dev/ -follow -type c -maxdepth 1 -print 2>/dev/null | xargs ls -dils | grep "1*1[46]," | cut -d: -f2 | cut -d" " -f2; echo /proc/asound/dev/*`
local ossdevs="/dev/admmidi* /dev/adsp* /dev/amidi* /dev/audio* /dev/dmfm* \
/dev/dmmidi* /dev/dsp* /dev/dspW* /dev/midi0* /dev/mixer* /dev/music \
/dev/patmgr* /dev/sequencer* /dev/sndstat"
local alsadevs="/proc/asound/dev/* /dev/sound/* /dev/snd/*"
fuser -k ${ossdevs} ${alsadevs} >/dev/null 2>/dev/null
# remove all sequencer connections if any
[ -f /proc/asound/seq/clients ] && type aconnect >/dev/null 2>/dev/null && aconnect --removeall
}
restore() {
ebegin "Restoring Mixer Levels"
if [ ! -r "${alsastatedir}/asound.state" ] ; then
ewarn "No mixer config in ${alsastatedir}/asound.state, you have to unmute your card!"
eend 0
return 0
fi
local cards="$(sed -n -e 's/ *\([[:digit:]]*\) .*/\1/p' /proc/asound/cards)"
local CARDNUM
for cardnum in ${cards}; do
[ -e /dev/snd/controlC${cardnum} ] || sleep 2
[ -e /dev/snd/controlC${cardnum} ] || sleep 2
[ -e /dev/snd/controlC${cardnum} ] || sleep 2
[ -e /dev/snd/controlC${cardnum} ] || sleep 2
alsactl -f "${alsastatedir}/asound.state" restore ${cardnum} \
|| ewarn "Errors while restoring defaults, ignoring"
done
for ossfile in "${alsastatedir}"/oss/card*_pcm* ; do
[ -e "${ossfile}" ] || continue
# We use cat because I'm not sure if cp works properly on /proc
local procfile=${ossfile##${alsastatedir}/oss}
procfile="$(echo "${procfile}" | sed -e 's,_,/,g')"
if [ -e /proc/asound/"${procfile}"/oss ] ; then
cat "${ossfile}" > /proc/asound/"${procfile}"/oss
fi
done
eend 0
}
save() {
ebegin "Storing ALSA Mixer Levels"
mkdir -p "${alsastatedir}"
if ! alsactl -f "${alsastatedir}/asound.state" store; then
eerror "Error saving levels."
eend 1
return 1
fi
for ossfile in /proc/asound/card*/pcm*/oss; do
[ -e "${ossfile}" ] || continue
local device=${ossfile##/proc/asound/} ; device=${device%%/oss}
device="$(echo "${device}" | sed -e 's,/,_,g')"
mkdir -p "${alsastatedir}/oss/"
cp "${ossfile}" "${alsastatedir}/oss/${device}"
done
eend 0
}
start() {
if [ -f /proc/modules ] && [ "${LOAD_ON_START}" = "yes" ]; then
ebegin "Loading ALSA modules"
eindent
load_modules
eoutdent
eend $? || return 1
fi
if [ ! -d /proc/asound ]; then
eerror "ALSA failed to load."
eend 1
return 1
elif [ "${RESTORE_ON_START}" = "yes" ]; then
restore
fi
return 0
}
stop() {
if [ ! -d /proc/asound ] ; then
eerror "ALSA is not loaded"
return 0
fi
[ "${SAVE_ON_STOP}" = "yes" ] && save
return 0
}
diff -Naur alsa-utils-1.0.9a-orig/alsaconf/alsaconf.in alsa-utils-1.0.9a/alsaconf/alsaconf.in
--- alsa-utils-1.0.9a-orig/alsaconf/alsaconf.in 2005-03-24 00:24:52.000000000 -0800
+++ alsa-utils-1.0.9a/alsaconf/alsaconf.in 2005-07-18 09:25:02.000000000 -0700
@@ -58,6 +58,8 @@
distribution="redhat"
elif test -f /etc/fedora-release && grep -q "Fedora" /etc/fedora-release; then
distribution="fedora"
+elif test -f /etc/alpine-release; then
+ distribution="alpine"
elif [ -f /etc/slackware-version -o -f /etc/slamd64-version ]; then
distribution="slackware"
else
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment