Commit bb04cb9d authored by Carlo Landmeter's avatar Carlo Landmeter

testing/fprobe: new aport

parent 5a9af1f3
# Contributor: Carlo Landmeter <clandmeter@gmail.com>
# Maintainer: Carlo Landmeter <clandmeter@gmail.com>
pkgname=fprobe
pkgver=1.1
pkgrel=0
pkgdesc="libpcap-based tool that collect network traffic"
url="http://fprobe.sourceforge.net/"
license="GPL"
depends="uclibc"
makedepends="libpcap-dev"
subpackages="$pkgname-doc"
source="http://downloads.sourceforge.net/$pkgname/$pkgname-$pkgver.tar.bz2
$pkgname.initd
$pkgname.confd"
build() {
cd "$srcdir/$pkgname-$pkgver"
./configure --prefix=/usr \
--sysconfdir=/etc \
--mandir=/usr/share/man \
--infodir=/usr/share/info
make || return 1
make DESTDIR="$pkgdir" install
install -m755 -D "$srcdir"/$pkgname.initd "$pkgdir"/etc/init.d/$pkgname
install -m644 -D "$srcdir"/$pkgname.confd "$pkgdir"/etc/conf.d/$pkgname
}
md5sums="65850d0470078269b33eee58cba77ac2 fprobe-1.1.tar.bz2
a682fef5ba72855db5d67b62c88ffaf0 fprobe.initd
ba9c9327456e4db897b60481705df282 fprobe.confd"
# Config file for /etc/init.d/fprobe
# Do we want the interface in promiscous mode [yes/no]
#PROMISC=no
# Interface
IFACE=eth0
# If configured, only capture packets matching this tcpdump expression
#FILTER=""
# Flow state timers
#TIMER_EXPIRED=5
#TIMER_FRAGMENTED=30
#TIMER_IDLE=60
#TIMER_ACTIVE=300
# This is the default and should be left unless you know what you are doing
#FLOW_VER=5
# local ip. if configured fprobe will use this as the source IP for sending ALL flow data
# If you want to specify a specific source address per collecter, customize it below
#LOCALIP=
# SNMP iface id
SNMP_IFACE="${IFACE//eth}"
# Maximum number of concurrent flows to track
# using a specified amount of memory
#MEMBULK=10000
#MEMLIMIT=
# Pending queue
#PENDING=100
# Kernel capture buffer size (kB)
#KERNBUF=1024
# Realtime priority [0=disabled, 1..99]
#RTPRIO=0
# Delay N nanoseconds after each B bytes
#DELAY="0:0"
# How much of the start of each packet to grab
#SNAPLEN=256
# chroot() to this location after startup
CHROOT="/var/empty"
# User to run as. must have perms to the pidfile directory /var/run/fprobe/
USER=nobody
# logging level for syslog (0=EMERG, ..., 6=INFO, 7=DEBUG)
#LOGLEVEL=6
# If you want to run multiple instances of fprobe,
# You MUST set this variable to a unique INTEGER for each one!
PIDFILE_ID=''
# remote ip. this is where we send flows
REMOTEIP=127.0.0.1
# port to listen on
PORT=2055
# Collector type, see the manpage for valid types
TYPE=''
# If you want multiple collectors, just specify each one here
COLLECTORS="${REMOTEIP}:${PORT}/${LOCALIP}/${TYPE}"
#!/sbin/runscript
# Copyright 1999-2008 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
depend() {
need net
}
BIN=/usr/sbin/fprobe
PIDFILE_EXTRA=""
[ -n "$PIDFILE_ID" ] && PIDFILE_EXTRA="[$PIDFILE_ID]"
PIDFILE="/var/run/fprobe$PIDFILE_EXTRA.pid"
start() {
ebegin "Starting fprobe"
local OPTS=""
[ "${PROMISC}" == "yes" ] || OPTS="${OPTS} -p"
[ -n "${FILTER}" ] && OPTS="${OPTS} -f '${FILTER}'"
for optname in i:IFACE s:TIMER_EXPIRED g:TIME_FRAGMENTED d:TIMER_IDLE \
e:TIMER_ACTIVE n:FLOW_VER a:LOCALIP x:SNMP_IFACE b:MEMBULK \
m:MEMLIMIT q:PENDING B:KERNBUF r:RTPRIO t:DELAY S:SNAPLEN \
c:CHROOT u:USER v:LOGLEVEL ; do
opt="${optname/:*}" optvar="${optname/*:}"
eval optvalue="\$$optvar"
[ -n "$optvalue" ] && OPTS="${OPTS} -${opt} ${optvalue}"
done
OPTS="${OPTS} -l 1:${PIDFILE_ID} ${COLLECTORS}"
start-stop-daemon --start --exec $BIN \
--pidfile ${PIDFILE} \
-- ${OPTS}
eend $?
}
stop() {
ebegin "Stopping fprobe"
start-stop-daemon --stop --quiet --exec $BIN \
--pidfile ${PIDFILE}
eend $?
}
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment