*/*-grsec: disable CONFIG_IDE from kernel config

This avoids disks show up as hdX. Only sdX will be used.

main/dahdi-linux-grsec/APKBUILD

@@ -14,7 +14,7 @@ _realname=dahdi-linux
 
 pkgname=${_realname}-${_flavor}
 pkgver=2.2.0
-pkgrel=16
+pkgrel=17
 pkgdesc="Digium Asterisk Hardware Device Interface drivers"
 url="http://www.asterisk.org"
 license="GPL"

main/iscsitarget-grsec/APKBUILD

@@ -15,7 +15,7 @@ if [ -f ../iscsitarget/APKBUILD ]; then
 fi
 pkgname=${_realname}-${_flavor}
 pkgver=${pkgver:-0.4.17}
-pkgrel=14
+pkgrel=15
 pkgdesc="$_flavor kernel modules for iscsitarget"
 url="http://iscsitarget.sourceforge.net/"
 license="GPL-2"

main/kqemu-grsec/APKBUILD

@@ -12,7 +12,7 @@ _abi_release=$pkgver-${_flavor}
 pkgname=${_realname}-${_flavor}
 pkgver=1.4.0_pre1
 _realver=1.4.0pre1
-pkgrel=7
+pkgrel=8
 pkgdesc="$_flavor kernel modules for kemu"
 url="http://www.nongnu.org/qemu/"
 license="GPL"

main/linux-grsec/APKBUILD

@@ -4,7 +4,7 @@ _flavor=grsec
 pkgname=linux-${_flavor}
 pkgver=2.6.30.7
 _kernver=2.6.30
-pkgrel=0
+pkgrel=1
 pkgdesc="Linux kernel with grsecurity"
 url=http://grsecurity.net
 depends="mkinitfs"
@@ -116,4 +116,4 @@ md5sums="7a80058a6382e5108cdb5554d1609615  linux-2.6.30.tar.bz2
 7c91fa862b90d74da3aa83446d69a412  patch-2.6.30.7.bz2
 414fc3d63417fc21a00ef94a611c58be  grsecurity-2.1.14-2.6.30.7-200909151852.patch
 ca05fd252783b82e01610e775cf56498  net-next-2.6.git-5ef12d98a19254ee5dc851bd83e214b43ec1f725.patch
-35d29ea012d4b009ce2bd37b7540903e  kernelconfig"
+9f41d910914f5a516072f0aa500fa117  kernelconfig"

main/linux-grsec/kernelconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30.5
-# Wed Sep  2 06:25:44 2009
+# Linux kernel version: 2.6.30.7
+# Fri Sep 18 08:02:48 2009
 #
 # CONFIG_64BIT is not set
 CONFIG_X86_32=y
@@ -1259,89 +1259,7 @@ CONFIG_EEPROM_AT25=m
 CONFIG_EEPROM_LEGACY=m
 CONFIG_EEPROM_93CX6=m
 CONFIG_HAVE_IDE=y
-CONFIG_IDE=m
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_XFER_MODE=y
-CONFIG_IDE_TIMINGS=y
-CONFIG_IDE_ATAPI=y
-CONFIG_IDE_LEGACY=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=m
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-CONFIG_BLK_DEV_IDECS=m
-CONFIG_BLK_DEV_DELKIN=m
-CONFIG_BLK_DEV_IDECD=m
-# CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS is not set
-CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEACPI=y
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=m
-CONFIG_BLK_DEV_PLATFORM=m
-CONFIG_BLK_DEV_CMD640=m
-# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
-CONFIG_BLK_DEV_IDEPNP=m
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=m
-CONFIG_BLK_DEV_OPTI621=m
-CONFIG_BLK_DEV_RZ1000=m
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-CONFIG_BLK_DEV_AEC62XX=m
-CONFIG_BLK_DEV_ALI15X3=m
-CONFIG_BLK_DEV_AMD74XX=m
-CONFIG_BLK_DEV_ATIIXP=m
-CONFIG_BLK_DEV_CMD64X=m
-CONFIG_BLK_DEV_TRIFLEX=m
-CONFIG_BLK_DEV_CS5520=m
-CONFIG_BLK_DEV_CS5530=m
-CONFIG_BLK_DEV_CS5535=m
-CONFIG_BLK_DEV_CS5536=m
-CONFIG_BLK_DEV_HPT366=m
-CONFIG_BLK_DEV_JMICRON=m
-CONFIG_BLK_DEV_SC1200=m
-CONFIG_BLK_DEV_PIIX=m
-CONFIG_BLK_DEV_IT8172=m
-CONFIG_BLK_DEV_IT8213=m
-CONFIG_BLK_DEV_IT821X=m
-CONFIG_BLK_DEV_NS87415=m
-CONFIG_BLK_DEV_PDC202XX_OLD=m
-CONFIG_BLK_DEV_PDC202XX_NEW=m
-CONFIG_BLK_DEV_SVWKS=m
-CONFIG_BLK_DEV_SIIMAGE=m
-CONFIG_BLK_DEV_SIS5513=m
-CONFIG_BLK_DEV_SLC90E66=m
-CONFIG_BLK_DEV_TRM290=m
-CONFIG_BLK_DEV_VIA82CXXX=m
-CONFIG_BLK_DEV_TC86C001=m
-
-#
-# Other IDE chipsets support
-#
-
-#
-# Note: most of these also require special kernel boot parameters
-#
-CONFIG_BLK_DEV_4DRIVES=m
-CONFIG_BLK_DEV_ALI14XX=m
-CONFIG_BLK_DEV_DTC2278=m
-CONFIG_BLK_DEV_HT6560B=m
-CONFIG_BLK_DEV_QD65XX=m
-CONFIG_BLK_DEV_UMC8672=m
-CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDE is not set
 
 #
 # SCSI device support
@@ -3751,7 +3669,6 @@ CONFIG_LEDS_BD2802=m
 #
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
 CONFIG_LEDS_TRIGGER_BACKLIGHT=m
 CONFIG_LEDS_TRIGGER_GPIO=m

main/xtables-addons-grsec/APKBUILD

@@ -16,7 +16,7 @@ fi
 
 pkgname=${_realname}-${_flavor}
 pkgver=${pkgver:-1.17}
-pkgrel=12
+pkgrel=13
 pkgdesc="Iptables extensions kernel modules"
 url="http://xtables-addons.sourceforge.net/"
 license="GPL"

testing/compat-wireless-grsec/APKBUILD

@@ -10,7 +10,7 @@ _kernelver=$pkgver-r$pkgrel
 
 pkgname=${_realname}-${_flavor}
 pkgver=2.6.30
-pkgrel=1
+pkgrel=2
 pkgdesc="$_flavor kernel backported wifi drivers"
 url="http://linuxwireless.org/en/users/Download/stable/"
 license="GPL-2"