abuild.in

#!/bin/sh

# abuild - build apk packages (light version of makepkg)
# Copyright (c) 2008 Natanael Copa <natanael.copa@gmail.com>
#
# Distributed under GPL-2
#

abuild_ver=@VERSION@
sysconfdir=@sysconfdir@
abuildrepo_base=@abuildrepo@
datadir=@datadir@

program=${0##*/}
abuild_path=$(readlink -f $0)

# defaults
BUILD_BASE="build-base"
FAKEROOT=${FAKEROOT:-"fakeroot"}

: ${SUDO_APK:=abuild-apk}
: ${APK:=apk}
: ${ADDUSER:=abuild-adduser}
: ${ADDGROUP:=abuild-addgroup}

apk_opt_wait="--wait 30"

# read config
ABUILD_CONF=${ABUILD_CONF:-"$sysconfdir/abuild.conf"}
[ -f "$ABUILD_CONF" ] && . "$ABUILD_CONF"

default_colors() {
	NORMAL="\033[1;0m"
	STRONG="\033[1;1m"
	RED="\033[1;31m"
	GREEN="\033[1;32m"
	YELLOW="\033[1;33m"
	BLUE="\033[1;34m"
}

monochrome() {
	NORMAL=""
	STRONG=""
	RED=""
	GREEN=""
	YELLOW=""
	BLUE=""
}

#colors
if [ -n "$USE_COLORS" ]; then
    default_colors
fi

# run optional log command for remote logging
logcmd() {
	${ABUILD_LOG_CMD:-true} "$@"
	return 0
}

# functions
msg() {
	[ -n "$quiet" ] && return 0
	local prompt="$GREEN>>>${NORMAL}"
	local fake="${FAKEROOTKEY:+${BLUE}*${NORMAL}}"
	local name="${STRONG}${subpkgname:-$pkgname}${NORMAL}"
	printf "${prompt} ${name}${fake}: %s\n" "$1" >&2
}

msg2() {
	[ -n "$quiet" ] && return 0
	#      ">>> %s"
	printf "    %s\n" "$1" >&2
}

warning() {
	local prompt="${YELLOW}>>> WARNING:${NORMAL}"
	local fake="${FAKEROOTKEY:+${BLUE}*${NORMAL}}"
	local name="${STRONG}${subpkgname:-$pkgname}${NORMAL}"
	printf "${prompt} ${name}${fake}: %s\n" "$1" >&2
}

warning2() {
	#      ">>> WARNING:
	printf "             %s\n" "$1" >&2
}

error() {
	local prompt="${RED}>>> ERROR:${NORMAL}"
	local fake="${FAKEROOTKEY:+${BLUE}*${NORMAL}}"
	local name="${STRONG}${subpkgname:-$pkgname}${NORMAL}"
	printf "${prompt} ${name}${fake}: %s\n" "$1" >&2
	logcmd "ERROR: $pkgname: $1"
}

error2() {
	#      ">>> ERROR:
	printf "           %s\n" "$1" >&2
}

set_xterm_title() {
	if [ "$TERM" = xterm ] && [ -n "$USE_COLORS" ]; then
		 printf "\033]0;$1\007" >&2
	fi
}

cleanup() {
	set_xterm_title ""
	if [ -z "$install_after" ] && [ -n "$uninstall_after" ]; then
		msg "Uninstalling dependencies..."
		$SUDO_APK del --quiet $apk_opt_wait $uninstall_after
	fi
	if [ -n "$CLEANUP_FILES" ]; then
		rm -f $CLEANUP_FILES
	fi
}

die() {
	error "$@"
	cleanup
	exit 1
}

spell_error() {
	die "APKBUILD contains '$1'. It should be '$2'"
}

# check if apkbuild is basicly sane
default_sanitycheck() {
	local i= j= suggestion=
	msg "Checking sanity of $APKBUILD..."
	[ -z "$pkgname" ] && die "Missing pkgname in APKBUILD"
	[ -z "${pkgname##* *}" ] && die "pkgname contains spaces"
	[ -z "$pkgver" ] && die "Missing pkgver in APKBUILD"
	if [ "$pkgver" != "volatile" ] && [ -z "$nodeps" ]; then
		$APK version --check --quiet "$pkgver" ||\
			die "$pkgver is not a valid version"
	fi
	[ -z "$pkgrel" ] && die "Missing pkgrel in APKBUILD"
	[ -z "$pkgdesc" ] && die "Missing pkgdesc in APKBUILD"
	[ -z "$url" ] && die "Missing url in APKBUILD"
	[ -z "$license" ] && die "Missing license in APKBULID"
	if [ $(echo "$pkgdesc" | wc -c) -gt 128 ]; then
		die "pkgdesc is too long"
	fi
	is_function package || warning "Missing package() function in APKBUILD"

	if [ -n "$replaces_priority" ] \
		&& ! echo $replaces_priority | egrep -q '^[0-9]+$'; then
		die "replaces_priority must be a number"
	fi
	# check so no package names starts with -
	for i in $pkgname $subpackages; do
		case $i in
		-*) die "${i%:*} is not a valid package name";;
		esac
	done

	# check if CARCH, CBUILD, CHOST and CTARGET is set
	[ -z "$CHOST" ] && die "Please set CHOST in /etc/abuild.conf"
	[ -z "$CBUILD" ] && CBUILD="$CHOST"
	[ -z "$CTARGET" ] && CTARGET="$CHOST"

	if [ -z "$CARCH" ]; then
		die "Please fix CHOST, or set CARCH in abuild.conf"
	fi

	for i in $install; do
		local n=${i%.*}
		local suff=${i##*.}
		case "$suff" in
		pre-install|post-install|pre-upgrade|post-upgrade|pre-deinstall|post-deinstall);;
		*) die "$i: unknown install script suffix"
		esac
		if ! subpackages_has "$n" && [ "$n" != "$pkgname" ]; then
			die "$i: install script does not match pkgname or any subpackage"
		fi
		[ -e "$startdir/$i" ] || die "install script $i is missing"
		for j in chown chmod chgrp; do
			if grep -q $j "$startdir"/$i; then
				warning "$i: found $j"
				warning2 "Permissions should be fixed in APKBUILD package()"
			fi
		done
	done

	for i in $triggers; do
		local f=${i%=*}
		local p=${f%.trigger}
		[ "$f" = "$i" ] && die "$f: triggers must contain '='"
		[ "$p" = "$f" ] && die "$f: triggers scripts must have .trigger suffix"
		if ! subpackages_has "$p" && [ "$p" != "$pkgname" ]; then
			die "$p: trigger script does not match pkgname or any subpackage"
		fi

		[ -e "$startdir"/$f ] || die "trigger script $f is missing"
	done
	if [ -n "$source" ]; then
		for i in $source; do
			if install_has "$i"; then
				warning "You should not have \$install in source"
				continue
			fi
			case "$i" in
				*::*) i=${i%%::*};;
				https://*) makedepends_has wget && warning "wget no longer need to be in makedepends when source has https://" ;;
			esac
			list_has ${i##*/} $md5sums $sha256sums $sha512sums \
				|| die "${i##*/} is missing in checksums"
		done
	fi

	# verify that things listed in checksum also is listed in source
	local algo=
	for algo in md5 sha256 sha512; do
		eval set -- \$${algo}sums
		while [ $# -gt 1 ]; do
			local file="$2"
			shift 2
			source_has $file || die "$file exists in ${algo}sums but is missing in source"
		done
	done

	# common spelling errors
	[ -n "$depend" ] && spell_error depend depends
	[ -n "$makedepend" ] && spell_error makedepend makedepends
	[ -n "$pkguser" ] && spell_error pkguser pkgusers
	[ -n "$pkggroup" ] && spell_error pkggroup pkggroups
	[ -n "$subpackage" ] && spell_error subpackage subpackages

	grep '^# Maintainer:' $APKBUILD >/dev/null || warning "No maintainer"

	makedepends_has 'g++' && warning "g++ should not be in makedepends"
	return 0
}

sanitycheck() {
	default_sanitycheck
}

sumcheck() {
	local algo="$1" sums="$2"
	local dummy f endreturnval originalparams origin file

	# get number of checksums
	set -- $sums
	local numsums=$(( $# / 2 ))

	set -- $source
	if [ $# -ne $numsums ]; then
		die "Number of ${algo}sums($numsums) does not correspond to number of sources($#)"
	fi
	fetch || return 1
	msg "Checking ${algo}sums..."
	cd "$srcdir" || return 1
	IFS=$'\n'
	endreturnval=0
	for src in $sums; do
		origin=$1; shift
		echo "$src" | ${algo}sum -c
		if [ $? -ne 0 ]; then
			endreturnval=1
			is_remote $origin || continue
			echo "Because the remote file above failed the ${algo}sum check it will be deleted."
			echo "Rebuilding will cause it to re-download which in some cases may fix the problem."
			file=`echo "$src" | sed 's/.*[ \t\n]\(.*\)/\1/'`
			echo "Deleting: $file"
			rm $file
		fi
	done
	unset IFS
	return $endreturnval
}

# for compatibility
md5check() {
	warning "'md5check' is deprecated. Use 'verify' instead"
	sumcheck md5 "$md5sums"
}

# verify checksums
verify() {
	local verified=false algo=
	for algo in sha512 sha256 sha1 md5; do
		local sums=
		eval sums=\"\$${algo}sums\"
		if [ -z "$sums" ] || [ -z "$source" ]; then
			continue
		fi
		sumcheck "$algo" "$sums" || return 1
		verified=true
		break
	done
	if [ -n "$source" ] && ! $verified; then
		die "Use 'abuild checksum' to generate/update the checksum(s)"
	fi
	return 0
}

# verify upstream sources
sourcecheck() {
	local uri
	for uri in $source; do
		is_remote $uri || continue
		case "$uri" in
		saveas-*://*)
			uri=${uri#saveas-}
			uri=${uri%/*}
			;;
		*::*)
			uri=${uri##*::}
			;;
		esac
		wget -q -s "$uri" || return 1
	done
	return 0
}

# convert curl options to wget options and call wget instead of curl
wget_fallback() {
	local wget_opts= outfile= opt=
	while getopts "C:Lko:s" opt; do
		case $opt in
		'L') ;; # --location. wget does this by default
		'f') ;; # --fail. wget does this by default
		'C') wget_opts="$wget_opts -c";; # --continue-at
		's') wget_opts="$wget_opts -q";; # --silent
		'o') wget_opts="$wget_opts -O $OPTARG";; # --output
		'k') wget_opts="$wget_opts --no-check-certificate";; #gnu wget
		esac
	done
	shift $(( $OPTIND - 1 ))
	wget $wget_opts "$1"
}

uri_fetch() {
	local uri="$1"
	local d="${uri##*/}"	# $(basename $uri)
	local opts
	[ -n "$quiet" ] && opts="-s"

	local lockfile="$SRCDEST/$d".lock

	# fix saveas-*://* URIs
	case "$uri" in
		# remove 'saveas-' from beginning and
		# '/filename' from end of URI
		saveas-*://*) uri="${uri:7:$(expr ${#uri} - 7 - ${#d} - 1)}";;

		*::*)
			d=${uri%%::*}
			uri=${uri#$d::}
			;;
	esac

	case "$uri" in
		https://*) opts="-k";;
	esac

	mkdir -p "$SRCDEST"

	CLEANUP_FILES="$CLEANUP_FILES $lockfile"
	(
	flock -n -x 9 || msg "Waiting for ${lockfile##*/}..."
	flock -x 9

	[ -f "$SRCDEST/$d" ] && exit 0 # use exit since its a subshell

	if [ -f "$SRCDEST/$d.part" ]; then
		msg "Partial download found. Trying to resume"
		opts="$opts -C -"
	fi
	msg "Fetching $uri"

	# fallback to wget if curl is missing. useful for bootstrapping
	local fetcher=
	if ! [ -x "$(which curl)" ]; then
		fetcher=wget_fallback
	else
		fetcher=curl
		opts="$opts -L -f -k"
	fi

	$fetcher $opts -o "$SRCDEST/$d.part" "$uri" \
		&& mv "$SRCDEST/$d.part" "$SRCDEST/$d"

	) 9>$lockfile

	local rc=$?
	rm -f "$lockfile"
	return $rc
}

is_remote() {
	case "${1#*::}" in
		http://*|ftp://*|https://*|saveas-*://*)
			return 0;;
	esac
	return 1
}

filename_from_uri() {
	local uri="$1"
	local filename="${uri##*/}"  # $(basename $uri)
	case "$uri" in
	*::*) filename=${uri%%::*};;
	esac
	echo "$filename"
}

# try download from file from mirror first
uri_fetch_mirror() {
	local uri="$1"
	if [ -n "$DISTFILES_MIRROR" ]; then
		if is_remote "$DISTFILES_MIRROR"; then
			uri_fetch "$DISTFILES_MIRROR"/$(filename_from_uri $uri)\
				&& return 0
		else
			cp "$DISTFILES_MIRROR"/$(filename_from_uri $uri) \
				"$SRCDEST" && return 0
		fi
	fi
	uri_fetch "$uri"
}

default_fetch() {
	local s
	mkdir -p "$srcdir"
	for s in $source; do
		if is_remote "$s"; then
			uri_fetch_mirror "$s" || return 1
			ln -sf "$SRCDEST/$(filename_from_uri $s)" "$srcdir"/
		else
			ln -sf "$startdir/$s" "$srcdir/"
		fi
	done
}

fetch() {
	default_fetch
}

# verify that all init.d scripts are openrc runscripts
initdcheck() {
	local i
	for i in $source; do
		case $i in
		*.initd)
			head -n 1 "$srcdir"/$i | grep -q '/sbin/runscript' \
				&& continue
			error "$i is not an openrc #!/sbin/runscript"
			return 1
			;;
		esac
	done
}

# unpack the sources
default_unpack() {
	local u
	if [ -z "$force" ]; then
		verify || return 1
		initdcheck || return 1
	fi
	mkdir -p "$srcdir"
	for u in $source; do
		local s="$SRCDEST/$(filename_from_uri $u)"
		case "$s" in
			*.tar)
				msg "Unpacking $s..."
				tar -C "$srcdir" -xf "$s" || return 1;;
			*.tar.gz|*.tgz)
				msg "Unpacking $s..."
				tar -C "$srcdir" -zxf "$s" || return 1;;
			*.tar.bz2)
				msg "Unpacking $s..."
				tar -C "$srcdir" -jxf "$s" || return 1;;
			*.tar.lzma)
				msg "Unpacking $s..."
				unlzma -c "$s" | tar -C "$srcdir" -x  \
					|| return 1;;
			*.tar.xz)
				msg "Unpacking $s..."
				unxz -c "$s" | tar -C "$srcdir" -x || return 1;;
			*.zip)
				msg "Unpacking $s..."
				unzip "$s" -d "$srcdir" || return 1;;
		esac
	done
}

unpack() {
	default_unpack
}

# cleanup source and package dir
clean() {
	msg "Cleaning temporary build dirs..."
	rm -rf "$srcdir"
	rm -rf "$pkgbasedir"
}

# cleanup fetched sources
cleancache() {
	local s
	for s in $source; do
		if is_remote "$s"; then
			s=$(filename_from_uri $s)
			msg "Cleaning downloaded $s ..."
			rm -f "$SRCDEST/$s"
		fi
	done
}

listpkgnames() {
	local i
	for i in $pkgname $subpackages; do
		echo ${i%:*}
	done
	for i in $linguas; do
		echo $pkgname-lang-$i
	done
}

cleanpkg() {
	local i
	getpkgver || return 1
	msg "Cleaning built packages..."
	for i in $(listpkgnames); do
		local p="${i%:*}-$pkgver-r$pkgrel"
		rm -f "$PKGDEST/$p.apk" "$PKGDEST/$p.src.tar.gz" \
			"$abuildrepo"/$p.apk "$abuildrepo"/*/$p.apk
	done
	# remove given packages from index
	update_abuildrepo_index
}

# clean all packages except current
cleanoldpkg() {
	local i j
	getpkgver || return 1
	msg "Cleaning all packages except $pkgver-r$pkgrel..."
	for i in $(listpkgnames); do
		local pn=${i%:*}
		for j in "$PKGDEST"/$pn-[0-9]*.apk ; do
			[ "$j" = "$PKGDEST/$pn-$pkgver-r$pkgrel.apk" ] \
				&& continue
			rm -f "$j" "$abuildrepo"/*/${j##*/}
		done
	done
	return 0
}

mkusers() {
	local i
	for i in $pkggroups; do
		if ! getent group $i >/dev/null; then
			msg "Creating group $i"
			$ADDGROUP -S $i || return 1
		fi
	done
	for i in $pkgusers; do
		if ! getent passwd $i >/dev/null; then
			local gopt=
			msg "Creating user $i"
			if getent group $i >/dev/null; then
				gopt="-G $i"
			fi
			$ADDUSER -S -D -H $gopt $i || return 1
		fi
	done
}

# helper to update config.sub to a recent version
update_config_sub() {
	find . -name config.sub | while read f; do
		msg "Replacing ${f##*/}"
		cp "$datadir"/${f##*/} "$f" || return 1
	done
}

runpart() {
	local part=$1
	[ -n "$DEBUG" ] && msg "$part"
	$part || die "$part failed"
}

# override those in your build script
getpkgver() {
	# this func is supposed to be overridden by volatile packages
	if [ "$pkgver" = "volatile" ]; then
		error "Please provide a getpkgver() function in your APKBUILD"
		return 1
	fi
}

prepare() {
	:
}

build() {
	:
}

# generate a simple tar.gz package of pkgdir
targz() {
	cd "$pkgdir" || return 1
	mkdir -p "$PKGDEST"
	tar -czf "$PKGDEST"/$pkgname-$pkgver-r$pkgrel.tar.gz *
}

get_split_func() {
	# get the 'func' from "sub-pkg:func"
	local func=${1##*:}

	# get 'func' from "sub-pkg-func" if there was no :func
	[ "$func" = "$1" ] && func=${func##*-}
	echo $func
}

postcheck() {
	local dir="$1" name="$2" i=
	msg "Running postcheck for $name"
	# checking for FHS compat
	if ! options_has "!fhs"; then
		for i in "$dir"/srv/* "$dir"/usr/local/* "$dir"/opt/*; do
			if [ -e "$i" ]; then
				error "Packages must not put anything under /srv, /usr/local or /opt"
				return 1
			fi
		done
	fi
	# look for *.la files
	i=$(find "$dir" -name '*.la' | sed "s|^$dir|\t|")
	if [ -n "$i" ] && ! options_has "libtool"; then
		error "Libtool archives (*.la) files found and \$options has no 'libtool' flag:"
		echo "$i"
		return 1
	fi
	# look for /usr/lib/charset.alias
	if [ -e "$dir"/usr/lib/charset.alias ] \
			&& ! options_has "charset.alias"; then
		error "Found /usr/lib/charset.alias"
		return 1
	fi
	# check directory permissions
	i=$(find "$dir" -type d -perm -777 | sed "s|^$dir|\t|")
	if [ -n "$i" ]; then
		warning "World writeable directories found:"
		echo "$i"
	fi
	# check so we dont have any suid root binaries that are not
	i=$(find "$dir" -type f -perm +6000 \
		| xargs scanelf --nobanner --etype ET_EXEC \
		| sed "s|ET_EXEC $dir|\t|")
	if [ -n "$i" ]; then
		error "Found non-PIE files that has SUID:"
		echo "$i"
		return 1
	fi
	# test for textrels
	if ! options_has "textrels"; then
		local res="$(scanelf --recursive --textrel --quiet "$dir")"
		if [ -n "$res" ]; then
			error "Found textrels:"
			echo "$res"
			return 1
		fi
	fi
	return 0
}

prepare_subpackages() {
	local i
	cd "$startdir"
	for i in $subpackages; do
		local func=$(get_split_func $i)
		# call abuild recursively, setting subpkg{dir,name}
		msg "Running split function $func..."
		local dir="$pkgbasedir/${i%:*}" name="${i%:*}"
		( subpkgdir="$dir" subpkgname="$name" \
			$0 $func prepare_package \
			&& postcheck "$dir" "$name" ) || return 1
	done
	postcheck "$pkgdir" "$pkgname" || return 1
	# post check for /usr/share/locale
	if [ -d "$pkgdir"/usr/share/locale ]; then
		warning "Found /usr/share/locale"
		warning2 "Maybe add \$pkgname-lang to subpackages?"
	fi
}

default_lang() {
	pkgdesc="Languages for package $pkgname"
	install_if="$pkgname=$pkgver-r$pkgrel lang"
	arch="noarch"
	local dir
	for dir in ${langdir:-/usr/share/locale}; do
		mkdir -p "$subpkgdir"/${dir%/*}
		mv "$pkgdir"/"$dir" "$subpkgdir"/"$dir" || return 1
	done
}

lang() {
	default_lang
}

default_lang_subpkg() {
	if [ -z "$lang" ]; then
		error "lang is not set"
		return 1
	fi
	pkgdesc="$pkgname language pack for $lang"
	arch="noarch"
	install_if="$pkgname=$pkgver-r$pkgrel lang-$lang"
	local dir
	for dir in ${langdir:-/usr/share/locale}; do
		mkdir -p "$subpkgdir"/$dir
		mv "$pkgdir"/$dir/$lang* \
		"$subpkgdir"/$dir/ \
		|| return 1
	done
}

lang_subpkg() {
	default_lang_subpkg
}

prepare_language_packs() {
	for lang in $linguas; do
		lang="$lang" \
		subpkgname="$pkgname-lang-$lang" \
		subpkgdir="$pkgbasedir"/$subpkgname \
			$0 lang_subpkg prepare_package || return 1
	done
}

# echo '-dirty' if git is not clean
git_dirty() {
	if [ $(git status -s "$startdir" | wc -l) -ne 0 ]; then
		echo "-dirty"
	fi
}

# echo last commit hash id
git_last_commit() {
	git log --format=oneline -n 1 "$startdir" | awk '{print $1}'
}

get_maintainer() {
	if [ -z "$maintainer" ]; then
		maintainer=$(awk -F': ' '/\# *Maintainer/ {print $2}' "$APKBUILD")
	fi
}

prepare_metafiles() {
	getpkgver || return 1
	local name=${subpkgname:-$pkgname}
	[ -z "${name##* *}" ] && die "package name contains spaces"
	local dir=${subpkgdir:-$pkgdir}
	local pkg="$name-$pkgver-r$pkgrel.apk"
	local pkginfo="$controldir"/.PKGINFO
	local sub

	[ ! -d "$dir" ] && die "Missing $dir"
	cd "$dir"
	mkdir -p "$controldir"
	local builddate=$(date -u "+%s")
	local size=$(du -sk | awk '{print $1 * 1024}')
	local parch="$CARCH"

	# we need to wait with setting noarch til our build infra can handle it
#	if [ "$arch" = "noarch" ]; then
#		parch="noarch"
#	fi

	echo "# Generated by $(basename $0) $abuild_ver" >"$pkginfo"
	if [ -n "$FAKEROOTKEY" ]; then
		echo "# using $($FAKEROOT -v)" >> "$pkginfo"
	fi
	echo "# $(date -u)" >> "$pkginfo"
	cat >> "$pkginfo" <<EOF
pkgname = $name
pkgver = $pkgver-r$pkgrel
pkgdesc = $pkgdesc
url = $url
builddate = $builddate
packager = ${PACKAGER:-"Unknown"}
size = $size
arch = $parch
origin = $pkgname
EOF
	local i deps
	deps="$depends"
	if [ "$pkgname" != "busybox" ] && ! depends_has busbox; then
		for i in $install $triggers; do
			local s=${i%=*}
			[ "$name" != "${s%.*}" ] && continue
			if head -n 1 "$startdir/$s" | grep '^#!/bin/sh' >/dev/null ; then
				msg "Script found. busybox added as a dependency for $pkg"
				deps="$deps busybox"
				break
			fi
		done
	fi

	# store last_commit in global var so we only call git once
	if [ -z "$last_commit" ]; then
		last_commit="$(git_last_commit)$(git_dirty)"
	fi
	echo "commit = $last_commit" >> "$pkginfo"

	get_maintainer
	if [ -n "$maintainer" ]; then
		echo "maintainer = $maintainer" >> "$pkginfo"
	fi

	if [ -n "$replaces_priority" ]; then
		echo "replaces_priority = $replaces_priority" >> "$pkginfo"
	fi

	for i in $license; do
		echo "license = $i" >> "$pkginfo"
	done
	for i in $replaces; do
		echo "replaces = $i" >> "$pkginfo"
	done
	for i in $deps; do
		echo "depend = $i" >> "$pkginfo"
	done
	for i in $conflicts; do
		echo "conflict = $i" >> "$pkginfo"
	done
	for i in $provides; do
		echo "provides = $i" >> "$pkginfo"
	done
	for i in $triggers; do
		local f=${i%=*}
		local dirs=${i#*=}
		[ "${f%.trigger}" != "$name" ] && continue
		echo "triggers = ${dirs//:/ }" >> "$pkginfo"
	done
	if [ -n "$install_if" ]; then
		echo "install_if = $(echo $install_if)" >> "$pkginfo"
	fi

	local metafiles=".PKGINFO"
	for i in $install $triggers; do
		local f=${i%=*}
		local n=${f%.*}
		if [ "$n" != "$name" ]; then
			continue
		fi
		script=${f#$name}
		msg "Adding $script"
		cp "$startdir/$f" "$controldir/$script" || return 1
		chmod +x "$controldir/$script"
		metafiles="$metafiles $script"
	done
	echo $metafiles | tr ' ' '\n' > "$controldir"/.metafiles
}

prepare_tracedeps() {
	local dir=${subpkgdir:-$pkgdir}
	local etype= soname= file= sover=
	[ "$arch" = "noarch" ] && return 0
	options_has "!tracedeps" && return 0
	# lets tell all the places we should look for .so files - all rpaths
	scanelf --quiet --recursive --rpath "$dir" \
		| sed -e 's/[[:space:]].*//' -e 's/:/\n/' | sort -u \
		>"$controldir"/.rpaths
	if grep -q -x '/usr/lib' "$controldir"/.rpaths; then
		warning "Redundat /usr/lib in rpath found"
	fi
	if grep '^/home/' "$controldir"/.rpaths; then
		error "Has /home/... in rpath"
		return 1
	fi
}

# check if dir has arch specific binaries
dir_has_arch_binaries() {
	local dir="$1"
	# if scanelf returns something, then we have binaries
	[ -n "$(scanelf -R "$dir" | head -n 1)" ] && return 0

	# look for static *.a
	[ -n "$(find "$dir" -type f -name '*.a' | head -n 1)" ] && return 0

	return 1
}

# returns true if this is the -dev package
is_dev_pkg() {
	test "${subpkgname%-dev}" != "$subpkgname"
}

# check that noarch is set if needed
archcheck() {
	options_has "!archcheck" && return 0
	if dir_has_arch_binaries "${subpkgdir:-$pkgdir}"; then
		[ "$arch" != "noarch" ] && return 0
		error "Arch specific binaries found so arch must not be set to \"noarch\""
		return 1
	elif [ "$arch" != "noarch" ] && ! is_dev_pkg; then
		# we dont want -dev package go to noarch
		warning "No arch specific binaries found so arch should probably be set to \"noarch\""
	fi
	return 0
}

prepare_package() {
	msg "Preparing ${subpkgname:+sub}package ${subpkgname:-$pkgname}..."
	stripbin
	prepare_metafiles && prepare_tracedeps || return 1
	archcheck